with the collaboration of Iranian Society of Mechanical Engineers (ISME)
Keywords = Bevameter
Agricultural and off-Road Machinery

Modelling Plate Penetration in Bekker Soil Model Using Machine Learning for Off-Road Vehicles

Articles in Press, Accepted Manuscript, Available Online from 26 October 2025

https://doi.org/10.22067/jam.2025.93736.1386

A. Nazari Chamki, A. Mardani, A. Hosainpour

Abstract The study of soil behaviour in wheel interaction is complex due to the wheel's geometry and the varying soil conditions. Traditional measurements of soil parameters, such as the Bevameter and the cone penetrometer, are time-consuming and labour-intensive. This research presents a machine learning-based approach to predict soil sinkage in plate penetration tests, providing a suitable alternative to conventional methods. A soil bin with controlled experimental conditions was used to collect data, which was measured by a load cell and a magnetic encoder at a constant penetration rate of 4 mm s-1. Two main machine learning models were selected; XGBoost and CatBoost. Hybrid versions of these models were developed using the Shrike Bird Optimisation Algorithm (SBOA). The results showed that the hybrid models outperformed the base models. The SBOA-CatBoost hybrid model achieved the highest accuracy on the training data with a coefficient of determination of 0.99, a mean square error of 2.81, and a mean absolute error of 0.79. The findings of this study highlight the potential of machine learning as a cost-effective and efficient alternative to traditional methods for measuring soil parameters. Further research is recommended to validate these models in different soil types and conditions.

Agricultural and off-Road Machinery

Evaluating the Effect of Soil Deformation Rate on the Estimation of the Energy Consumption in Soil-Tire Interactions Using the Pressure-Sinkage Equation

Volume 15, Issue 3, Summer 2025, Pages 363-377

https://doi.org/10.22067/jam.2024.89154.1269

H. Asadollahi, B. Mohammadi Alasti, A. Mardani, M. Abbasgholipour

Abstract Understanding soil deformation dynamics is critical in various fields, such as off-road vehicle mobility, agriculture, and soil mechanics. In particular, evaluating soil-tire interactions is essential for optimizing energy consumption and minimizing the negative effects of soil compaction. This study investigates the effect of soil deformation rates on the pressure-sinkage relationship and energy consumption using a controlled soil bin environment and a bevameter system. The primary objective of the study is to examine how different traffic levels and varying penetration rates influence the energy required to achieve specific sinkage depths. The study employed a completely randomized block design, with each treatment replicated three times to ensure precision and reliability. Quantitative measurements were obtained using a load cell attached to a bevameter, capturing the forces at a sampling frequency of 30 Hz. Results demonstrated a significant influence of both traffic level and penetration velocity on soil resistance and energy consumption. For the larger plate, the pressure required for penetration increased with higher velocities and traffic levels. At the highest velocity (45 mm s-1) and with 8 passes, the pressure needed for sinkage was maximal. The energy consumption for each scenario was calculated by integrating the area under the force-sinkage curve. The analysis of variance (ANOVA) revealed that the number of wheel passes, plate size, and penetration velocity significantly affected energy consumption. At the highest sinkage depth (60 mm), the energy consumption for the larger plate at 45 mm s-1 and with 8 passes was nearly double that of the smaller plate. These results emphasize the importance of considering both traffic-induced compaction and velocity when designing off-road vehicles or agricultural machinery that interact with deformable terrains.

Digital, Smart, and Precision Agriculture

Modeling Soil Pressure-Sinkage Characteristic as Affected by Sinkage rate using Deep Learning Optimized by Grey Wolf Algorithm

Volume 14, Issue 1, Winter 2024, Pages 69-82

https://doi.org/10.22067/jam.2023.84339.1188

B. Golanbari, A. Mardani, A. Hosainpour, H. Taghavifar

Abstract Due to the numerous variables that may influence the soil-machine interaction systems, predicting the mechanical response of soil interacting with off-road traction equipment is challenging. In this study, deep neural networks (DNNs) are chosen as a potential solution for explaining the varying soil sinkage rates because of their ability to model complex, multivariate, and dynamic systems. Plate sinkage tests were carried out using a Bevameter in a fixed-type soil bin with a 24 m length, 2 m width, and 1 m depth. Experimental tests were conducted at three sinkage rates for two plate sizes, with a soil water content of 10%. The provided empirical data on the soil pressure-sinkage relationship served as the basis for an algorithm capable of discerning the soil-machine interaction. From the iterative process, it was determined that a DNN, specifically a feed-forward back-propagation DNN with three hidden layers, is the optimal choice. The optimized DNN architecture is structured as 3-8-15-10-1, as determined by the Grey Wolf Optimization algorithm. While the Bekker equation had traditionally been employed as a widely accepted method for predicting soil pressure-sinkage behavior, it typically disregarded the influence of sinkage velocity of the soil. However, the findings revealed the significant impact of sinkage velocity on the parameters governing the soil deformation response. The trained DNN successfully incorporated the sinkage velocity into its structure and provided accurate results with an MSE value of 0.0871.