@article { author = {Askari, M. and Komarizade, M. H. and Nobakht, N.}, title = {Design, Construction and Test of a Three-point Hitch Dynamometer}, journal = {Journal of Agricultural Machinery}, volume = {1}, number = {2}, pages = {-}, year = {2011}, publisher = {Ferdowsi University of Mashhad}, issn = {2228-6829}, eissn = {2423-3943}, doi = {10.22067/jam.v1i2.11353}, abstract = {For measuring the draft forces exerted by implements into tractor, we use the dynamometers that are divided into pull type or three-point hitch type. For measuring the forces between the tractor and the mounted implements, three-point hitch dynamometers are used. In this research, an adjustable three-point hitch dynamometer with a draft capacity of 25 kN was designed and built which is made up from two frames that one of them placed inside the other. The force sensing elements were comprised of a loadcell that was installed between the frames. All mounted tillage implements were able to be tested by this measuring device excluding mounted implements which are powered by PTO and by using this dynamometer, the variations of implements draft force in the different tillage conditions consist of the various work depths and different forward speeds would be studied. After design and construction steps, dynamometer was calibrated, tested and evaluated. Field tests were done by using of four mounted tillage implements and obtained data were compared by obtained data from ASAE D497.5 standard formula. So with these data, the design of tines, their stems, equipment frames and the selection of the optimal size of the tillage equipments in regard of the soil type of the region and the power of the available tractors will be more scientific and reasonable.}, keywords = {Three-point hitch,Draft measurement,Tillage,Dynamometer,Design & construction}, title_fa = {طراحی، ساخت و آزمون دینامومتر اتصال سه نقطه}, abstract_fa = {برای اندازه گیری نیازهای کششی ادوات خاک ورزی از دینامومترهایی که به دوگروه مالبندی و اتصال سه نقطه تقسیم می گردند، استفاده می-شود. برای اندازه گیری نیروهای بین تراکتور و ادوات سوار، نیاز به استفاده از دینامومترهای اتصال سه نقطه می باشد. در این تحقیق، اقدام به طراحی، ساخت و آزمون دینامومتر قابل تنظیمی با ظرفیت کششی 25 کیلونیوتن شده است که به صورت اتصال سه نقطه سوار بوده و از دو قاب ریلی (کشوئی) که در داخل یکدیگر قرار گرفته اند، تشکیل شده است. تنها نیروسنجی که در این دستگاه استفاده شده است شامل یک عدد لودسل نصب شده بین دو قاب دینامومتر می باشد. انواع ادوات سوار به استثناء آن‌هایی که از محور تواندهی تراکتور نیرو می گیرند، قابل آزمون با این دستگاه بوده و بوسیله این دینامومتر می توان تغییرات نیروی مقاومت کششی آن‌ها را در شرایط مختلف خاک ورزی اعم از عمق کارهای مختلف و سرعت های متفاوت پیشروی مورد بررسی قرار داد. بعد از کالیبره کردن دینامومتر، آزمون های مزرعه ای دستگاه با استفاده از چهار نوع از ادوات سوار انجام و نتایج به‌دست آمده از این آزمون ها با اعداد محاسبه شده از روابط داده شده در استاندارد D497.5 ASAE مقایسه گردید. با اندازه گیری نیروی مقاومت کششی ادوات توسط این دینامومتر، کار طراحی تیغه ها، ساقه ها و شاسی ادوات خاک ورزی و انتخاب اندازه صحیح ادوات با توجه به نوع خاک منطقه و توان تراکتورهای موجود به صورت علمی، میسر می گردد.}, keywords_fa = {اتصال سه نقطه,اندازه گیری کشش,خاک ورزی,دینامومتر,طراحی و ساخت}, url = {https://jame.um.ac.ir/article_25115.html}, eprint = {https://jame.um.ac.ir/article_25115_29a111f2ce5b77328296271f4680cf02.pdf} }