<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE ArticleSet PUBLIC "-//NLM//DTD PubMed 2.7//EN" "https://dtd.nlm.nih.gov/ncbi/pubmed/in/PubMed.dtd">
<ArticleSet>
<Article>
<Journal>
				<PublisherName>Ferdowsi University of Mashhad</PublisherName>
				<JournalTitle>Journal of Agricultural Machinery</JournalTitle>
				<Issn>2228-6829</Issn>
				<Volume></Volume>
				<Issue>Articles in Press</Issue>
				<PubDate PubStatus="epublish">
					<Year>2026</Year>
					<Month>06</Month>
					<Day>23</Day>
				</PubDate>
			</Journal>
<ArticleTitle>Integrated Analytical Modelling and Experimental Validation of a Low-Cost Modular Agricultural Machine for Smallholder Mechanisation</ArticleTitle>
<VernacularTitle>Integrated Analytical Modelling and Experimental Validation of a Low-Cost Modular Agricultural Machine for Smallholder Mechanisation</VernacularTitle>
			<FirstPage></FirstPage>
			<LastPage></LastPage>
			<ELocationID EIdType="pii">48372</ELocationID>
			
<ELocationID EIdType="doi">10.22067/jam.2026.98710.1491</ELocationID>
			
			<Language>FA</Language>
<AuthorList>
<Author>
					<FirstName>K.</FirstName>
					<LastName>Kapadani</LastName>
<Affiliation>Department of Mechanical Engineering, PES’s Modern College of Engineering, Savitribai Phule Pune University, Pune, Maharashtra, India</Affiliation>
<Identifier Source="ORCID">0000-0003-0516-2378</Identifier>

</Author>
<Author>
					<FirstName>S.</FirstName>
					<LastName>Bhosale</LastName>
<Affiliation>Department of Mechanical Engineering, PES’s Modern College of Engineering, Savitribai Phule Pune University, Pune, Maharashtra, India</Affiliation>
<Identifier Source="ORCID">0009-0007-7203-7354</Identifier>

</Author>
<Author>
					<FirstName>S.</FirstName>
					<LastName>Nalavade</LastName>
<Affiliation>Department of Mechanical Engineering, PES’s Modern College of Engineering, Savitribai Phule Pune University, Pune, Maharashtra, India</Affiliation>
<Identifier Source="ORCID">0000-0002-7811-2841</Identifier>

</Author>
<Author>
					<FirstName>R.</FirstName>
					<LastName>Gurav</LastName>
<Affiliation>Department of Mechanical Engineering, Army Institute of Technology, Savitribai Phule Pune University, Pune, Maharashtra, India</Affiliation>
<Identifier Source="ORCID">0000-0002-0919-920X</Identifier>

</Author>
<Author>
					<FirstName>P.</FirstName>
					<LastName>Tamkhade</LastName>
<Affiliation>Department of Mechanical Engineering, Marathwada Mitra Mandal's College of Engineering, Savitribai Phule Pune University, Pune, Maharashtra, India</Affiliation>
<Identifier Source="ORCID">0000-0003-3468-7747</Identifier>

</Author>
<Author>
					<FirstName>P.</FirstName>
					<LastName>Purohit</LastName>
<Affiliation>Department of Mechanical Engineering, Army Institute of Technology, Savitribai Phule Pune University, Pune, Maharashtra, India</Affiliation>
<Identifier Source="ORCID">0000-0002-5741-8497</Identifier>

</Author>
<Author>
					<FirstName>A.</FirstName>
					<LastName>Tumane</LastName>
<Affiliation>Department of Mechanical Engineering, PES’s Modern College of Engineering, Savitribai Phule Pune University, Pune, Maharashtra, India</Affiliation>
<Identifier Source="ORCID">0009-0003-3131-3536</Identifier>

</Author>
<Author>
					<FirstName>Y.</FirstName>
					<LastName>More</LastName>
<Affiliation>Department of Mechanical Engineering, PES’s Modern College of Engineering, Savitribai Phule Pune University, Pune, Maharashtra, India</Affiliation>
<Identifier Source="ORCID">0009-0007-3671-1786</Identifier>

</Author>
<Author>
					<FirstName>P.</FirstName>
					<LastName>Senthil</LastName>
<Affiliation>Centre of Excellence for Additive Manufacturing, Sathyabama Institute of Science and Technology, Chennai, India</Affiliation>
<Identifier Source="ORCID">0000-0001-8167-4119</Identifier>

</Author>
</AuthorList>
				<PublicationType>Journal Article</PublicationType>
			<History>
				<PubDate PubStatus="received">
					<Year>2026</Year>
					<Month>05</Month>
					<Day>13</Day>
				</PubDate>
			</History>
		    <Abstract>Mechanisation of smallholder farming faces significant challenges, including high machinery costs, inefficient energy utilisation, and the lack of predictive design methodologies for multifunctional agricultural equipment. This study presents a low-cost modular multifunctional agricultural machine for smallholder applications, integrating soil-tool interaction modelling, nonlinear traction-slip analysis, coupled draft-power-torque relationships, structural stress evaluation, and lifecycle economic assessment within a unified analytical framework. Experimental validation conducted under three representative soil cohesion conditions (n = 36) demonstrated good agreement between analytical predictions and measured performance, with deviations of 8.7%, 9.2%, and 7.5% for draft force, torque, and structural stress, respectively. The proposed system exhibited energy consumption of 4.8–7.9 kWh ha-1, achieved a 22–26% reduction in operating costs compared with commercially available petrol-operated smallholder tillage units of comparable working width and field capacity, and yielded an estimated payback period of 1.8–2.3 years. The incorporation of traction analysis accounting for wheel slip improved the prediction of energy requirements while maintaining seed spacing uniformity above 87%. Soil cohesion, penetration depth, and slip ratio were identified as the dominant parameters influencing power demand and structural loading. The proposed framework demonstrated improved energy efficiency, operational stability, and economic feasibility under the investigated operating conditions and shows potential for broader smallholder mechanisation applications.</Abstract>
			<OtherAbstract Language="FA">Mechanisation of smallholder farming faces significant challenges, including high machinery costs, inefficient energy utilisation, and the lack of predictive design methodologies for multifunctional agricultural equipment. This study presents a low-cost modular multifunctional agricultural machine for smallholder applications, integrating soil-tool interaction modelling, nonlinear traction-slip analysis, coupled draft-power-torque relationships, structural stress evaluation, and lifecycle economic assessment within a unified analytical framework. Experimental validation conducted under three representative soil cohesion conditions (n = 36) demonstrated good agreement between analytical predictions and measured performance, with deviations of 8.7%, 9.2%, and 7.5% for draft force, torque, and structural stress, respectively. The proposed system exhibited energy consumption of 4.8–7.9 kWh ha-1, achieved a 22–26% reduction in operating costs compared with commercially available petrol-operated smallholder tillage units of comparable working width and field capacity, and yielded an estimated payback period of 1.8–2.3 years. The incorporation of traction analysis accounting for wheel slip improved the prediction of energy requirements while maintaining seed spacing uniformity above 87%. Soil cohesion, penetration depth, and slip ratio were identified as the dominant parameters influencing power demand and structural loading. The proposed framework demonstrated improved energy efficiency, operational stability, and economic feasibility under the investigated operating conditions and shows potential for broader smallholder mechanisation applications.</OtherAbstract>
		<ObjectList>
			<Object Type="keyword">
			<Param Name="value">Agricultural machinery</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Smallholder Mechanisation</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Smart Farming</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Soil-Tool Interaction</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Traction-Slip Modelling</Param>
			</Object>
		</ObjectList>
<ArchiveCopySource DocType="pdf">https://jame.um.ac.ir/article_48372_5e130ee89ac5f986710d872ff5d3655a.pdf</ArchiveCopySource>
</Article>
</ArticleSet>
