with the collaboration of Iranian Society of Mechanical Engineers (ISME)

Document Type : Research Article

Authors

Agricultural Machinery Engineering Department, Agricultural Sciences and Natural Resources University of Khuzestan, Ahvaz, Iran

Abstract

Introduction
Given the risk management and improving the process, reliability is important in operations and production management, especially agricultural process. Failure modes and effects analysis (FMEA) is regarded as one of the most powerful methods in this area. High applicability and proper analyzability of FMEA have caused to be among the most important techniques of systems for risk analysis and safety improvement. Risk management in all sectors is important, especially in agricultural sector. Sugarcane is one of the industrial crops used as raw material for several major and minor industries. In Iran, this crop is cultivated by sugarcane agro-industry companies. The sugarcane trailers were used to transport harvested sugarcane from farm to mill in these companies. There are many problems to milling it on time. One of the most important risks involved in sugarcane transportation is the delays encountered in this process which can affect the quality and quantity of the product. Delay in milling of the harvested sugarcane is caused by various reasons in agro-industry units including factory downtime, breakdowns of tractors at factory gate, tractor accident in factory yard and staff shift changes creating long queues. So, considering and using risk management techniques and eliminating risk factors can be an effective step to increase the efficiency of this process.
Materials and Methods
This research was carried out on Sugarcane and By-Products Development Company of Khuzestan. At first, the sugarcane transport operations and used equipment were investigated through an interview with experts in the safety and technical sectors and engineers of the Sugarcane and By-Products Development Company of Khuzestan and the study of related books in 2017. After that, the defects and errors of each equipment that caused technical problems and problems in other equipment, as well as the occurrence of injuries and human casualties were identified. Finally, the risks were written for valuation in the FMEA method paper. In this research, risk pricing was based on the Brainstorming method. Risk evaluation is based on the ranking of the effect severity, the risk occurrence probability and the degree of risk detection available in the FMEA method. In this research, analytical network process (ANP), a modern and powerful method in the decision-making field, has been used in combination with FMEA (FMEA-ANP) for defeating the shortcomings. FMEA-ANP considers mutual relationships of hazardous factors, and by offering a certain structure, develops a systematic and flexible view in risk management scope. The suggested method deploys a simple concept of risk priority number and assigns different importance in the form of power for each factor. The resulted RPN will cope better with the system, in which it is applied. This method provides a more accurate analysis of risk and, consequently, more efficient and effective actions, causing attainment and maintenance of more desirable reliability.
Results and Discussion
The results of FMEA-ANP model indicated that the mill equipment in the sugar factory is the most important delayed factor (failure) in the sugarcane transformation. For this reason, the basis failure causes in the sugar factory has been carefully investigated and it has been concluded by experts' opinions that factory mill and the conveyers failures are important causes of the delay in this process, respectively. Based on statistical analysis, 73.15% of the factory downtimes were related to mill and ranked as first compared with the other risk factors. Among the conveyors, the most damage was related to the inlet conveyor to the first mill and 49% of conveyors failures occurred in this conveyor.
Conclusion
This research validated the application of FMEA-ANP for the rational organization of the harvest-transport complex. According to this investigation, the probable downtimes and delays can be prevented by implementing the optimal preventive repair and maintenance planning in the sugar factory, and in particular on the factory mill equipment. In addition, efforts to adapt the speed of harvesting and the speed of delivery by the factory can be effective in reducing the delivery delay time by the factory.

Keywords

1. Bigdeli, Z., and N. Yousef Aghli. 2005. Investigating the motivations of the goals and database used by the experts of the Sugar Cane Development Company and the related industries of Khuzestan province and investigation of their problems for accessing their required information. Journal of Education 12 (2): 91-112.
2. Bayazit, O. 2006. Use of analytic network process in vendor selection decisions. Benchmarking: An International Journal.
3. Dori, B., H. Moazez, and H. Salami. 2011. Risk Analysis: A Combined Approach Using Failure Modes and Effects Analysis (FMEA) and Analytical Network Process (ANP). Management Research in Iran 14 (4): 107-136. (In Farsi).
4. Jafari Eskandari, M., and L. Alibeigi. 2016. To Provide Risk Analysis Approach of Knowledge-based Firm Project by means of ANP-RFMEA Technique. Technology Development Journal 48: 29-37.
5. Jafarnejad, A. 2015. Modern operations and production management (Concepts, systems, models and supply chains). University of Tehran press. 4th edition. 726 pp. (In Farsi).
6. Lamsal, K. 2014. Sugarcane harvest logistics. PhD (Doctor of Philosophy) the University of Iowa. http://ir.uiowa.edu/etd/1349.
7. Minaeimoghadam, M., P. Shishebor, E. Soleimannejadian, and A. Askarianzadeh. 2009. Biology of Sugarcane Whitefly, Neomaskellia and ropogonis Corbett (Hom., Aleyrodidae) on Four Sugarcane Cultivars Under Laboratory Conditions. Journal of Plant Protection 32 (1): 49-56. (In Farsi).
8. Monjezi, N., M. J. Sheikhdavoodi, H. Zaki Dizaji, A. Marzban, and M. Shomeili. 2017. Identifying and Prioritizing the Effective Parameters on Lack of Timeliness of Operations of Sugarcane Production using Analytical Hierarchy Process (AHP). Journal of Agricultural Machinery 7 (2): 514-526. (In Farsi).
9. Mottaghi, H. 2016. Production and operations management. Avaye Shervin press. 548 pp. (In Farsi).
10. Namdari, M., Sh. Rafiee, and A. Jafari. 2011. Using Failure Mode and Effect Analysis (FMEA) for Performing Good Ploughing with mouldboard. Journal of Agricultural Machinery 1 (1): 17-24. (In Farsi).
11. Saaty, T. L. 1999. Fundamentals of the analytic network process. ISAHP.
12. Slamet, A. S., A. Nakayasu, R. Astuti, and N. M. Rachman. 2017. Risk Assessment of Papaya Supply Chain: An Indonesian Case Study. International Business Management 100 (2): 508-521.
CAPTCHA Image