A
-
Abdanan Mehdizadeh, S.
Studying some Pollutant Emissions of an Injection Gasoline Engine Using Mixed Fuel of Ethanol, Gasoline and Carbon Nanoparticles [Volume 11, Issue 2, 2021, Pages 213-230]
-
Abdanan Mehdizadeh, S.
Feasibility of Online Diagnosis of Botrytis elliptica Disease in the Lilium Plant using the Machine Vision System and K-means [Volume 11, Issue 2, 2021, Pages 277-291]
-
Abdolmaleki, H.
Simulation, Development and Evaluation of an Autonomous Robotic Boat Used in Aquacultures [Volume 11, Issue 2, 2021, Pages 161-171]
-
Aboonajmi, M.
Estimation of the Best Classification Algorithm and Fraud Detection of Olive Oil by Olfaction Machine [Volume 11, Issue 2, 2021, Pages 371-383]
-
Aghkhani, M. H.
The Effect of Compression Ratio and Alternative Fuels on the Performance of Turbocharged Diesel Engine by GT-POWER Software [Volume 11, Issue 2, 2021, Pages 199-212]
-
Ahmadi, I.
Application of MS Excel to Estimate Power Needs of Tillage Tools [Volume 11, Issue 1, 2021, Pages 123-130]
-
Ahmadipour, S.
The Effect of Compression Ratio and Alternative Fuels on the Performance of Turbocharged Diesel Engine by GT-POWER Software [Volume 11, Issue 2, 2021, Pages 199-212]
-
Akram, A.
Potential Evaluation and Modeling of Biogas Production from Apple Pomace [Volume 11, Issue 2, 2021, Pages 305-316]
-
Akram, A.
Evaluation of Several Spectral Indices for Estimation of Canola Yield using Sentinel-2 Sensor Images [Volume 11, Issue 2, 2021, Pages 447-464]
-
Amiri Parian, J.
Greenhouse Mobile Robot Navigation Using Wheel Revolution Encoding and Learning Algorithm [Volume 11, Issue 1, 2021, Pages 1-15]
-
Amiri Parian, J.
Anthracnose Detection on Walnut Tree Leaves using Outdoor Image Processing Methods [Volume 11, Issue 2, 2021, Pages 317-329]
-
Arabhosseini, A.
Degree-Day Index for Estimating the Thermal Requirements of a Greenhouse Equipped with an Air-Earth Heat Exchanger System [Volume 11, Issue 1, 2021, Pages 83-95]
-
Asakereh, A.
Challenges and Opportunities in Development of Agricultural Mechanization in Ahvaz County using SWOT Method [Volume 11, Issue 2, 2021, Pages 535-548]
-
Asgarnezhad Nouri, B.
Ranking the Effective Factors in the Technology Acceptance Model for the Actual Use of Agricultural Automation (Case study: Ardebil) [Volume 11, Issue 2, 2021, Pages 525-534]
-
Azadbakht, M.
Investigating the Effects of Qualitative Properties on Pears Dielectric Coefficient [Volume 11, Issue 1, 2021, Pages 71-81]
-
Azadbakht, M.
Investigation of some Energy and Exergy Factors during Ohmic Heating Processing of Sour Orange [Volume 11, Issue 2, 2021, Pages 435-445]
-
Azadshahraki, F.
Ventilation and Cooling Modeling and Lyout of Fans, Pads and Vents of an Octagonal Greenhouse [Volume 11, Issue 2, 2021, Pages 247-262]
-
Azarikia, F.
Estimation of the Best Classification Algorithm and Fraud Detection of Olive Oil by Olfaction Machine [Volume 11, Issue 2, 2021, Pages 371-383]
-
Azimi-Nejadian, H.
Prediction of Seed Flow Rate of a Multi-Slot Rotor Feeding Device of a Corn Planter [Volume 11, Issue 1, 2021, Pages 17-27]
-
Azimi-Nejadian, H.
Evaluation of the Effect of Rake Angle on the Performance of a Modified Narrow Blade [Volume 11, Issue 2, 2021, Pages 187-197]
-
Azimi-Nejadian, H.
Energy and Exergy Analysis of Drying Process of Lemon Verbena Leaves in a Solar Dryer [Volume 11, Issue 2, 2021, Pages 423-433]
B
-
Bagheri, N.
Evaluation of Several Spectral Indices for Estimation of Canola Yield using Sentinel-2 Sensor Images [Volume 11, Issue 2, 2021, Pages 447-464]
-
Balanian, H.
Prediction of Seed Flow Rate of a Multi-Slot Rotor Feeding Device of a Corn Planter [Volume 11, Issue 1, 2021, Pages 17-27]
-
Behfar, H.
Designing and Constructing an Active Boom Balancing System using a New Technique Variable Fulcrum Method and Comparing It with a Conventional Sprayer [Volume 11, Issue 2, 2021, Pages 145-159]
-
Behroozi-Khazaei, N.
Modeling of Potato Slice Drying Process in a Microwave Dryer using Artificial Neural Network and Machine Vision [Volume 11, Issue 2, 2021, Pages 263-275]
-
Biabani Agdam, E.
Optimization Effect of Ultrasound on Rupture Force and Kernel Extracting Quality of Walnut using Response Surface Method (RSM) [Volume 11, Issue 2, 2021, Pages 331-342]
-
Biabi, H.
Feasibility of Online Diagnosis of Botrytis elliptica Disease in the Lilium Plant using the Machine Vision System and K-means [Volume 11, Issue 2, 2021, Pages 277-291]
-
Bimakr, M.
Applying Adaptive Neuro-Fuzzy Inference System and Artificial Neural Network to the Prediction of Quality changes of Hawthorn Fruit (Crataegus pinnatifida) during Various Storage Conditions [Volume 11, Issue 2, 2021, Pages 343-357]
D
-
Darvishi, H.
Modeling of Potato Slice Drying Process in a Microwave Dryer using Artificial Neural Network and Machine Vision [Volume 11, Issue 2, 2021, Pages 263-275]
E
-
Esmand, O.
Design and Development of a Warning System for Seed Blockage in a One Row Grain Drill [Volume 11, Issue 2, 2021, Pages 131-143]
F
-
Faridi, H.
Degree-Day Index for Estimating the Thermal Requirements of a Greenhouse Equipped with an Air-Earth Heat Exchanger System [Volume 11, Issue 1, 2021, Pages 83-95]
G
-
Ganjloo, A.
Applying Adaptive Neuro-Fuzzy Inference System and Artificial Neural Network to the Prediction of Quality changes of Hawthorn Fruit (Crataegus pinnatifida) during Various Storage Conditions [Volume 11, Issue 2, 2021, Pages 343-357]
-
Ghasemi, J.
Energy and Exergy Analysis of Drying Process of Lemon Verbena Leaves in a Solar Dryer [Volume 11, Issue 2, 2021, Pages 423-433]
-
Ghasemi-Varnamkhasti, M.
Estimation of the Best Classification Algorithm and Fraud Detection of Olive Oil by Olfaction Machine [Volume 11, Issue 2, 2021, Pages 371-383]
-
Ghasemzadeh, H. R.
Designing and Constructing an Active Boom Balancing System using a New Technique Variable Fulcrum Method and Comparing It with a Conventional Sprayer [Volume 11, Issue 2, 2021, Pages 145-159]
-
Ghazanfari Moghaddam, A.
Measuring Mechanical Properties and Simulating the Creep Behavior of Wild Cane Stem using Burger-Voigt Model [Volume 11, Issue 2, 2021, Pages 385-397]
-
Ghiasi, P.
Modeling Grain Losses in Mechanized Harvesting of Oily Sunflower [Volume 11, Issue 2, 2021, Pages 399-408]
-
Gholami Par-Shokohi, M.
Effect of Fragmentation of Land on Agricultural Mechanization Development using AHP Technique [Volume 11, Issue 1, 2021, Pages 43-53]
-
Goli, H.
Effects of Air Impingement Jet Drying on Drying Kinetics and Some Quality Attributes of Strawberry Slices [Volume 11, Issue 2, 2021, Pages 409-422]
H
-
Hajiahmad, A.
Simulation, Development and Evaluation of an Autonomous Robotic Boat Used in Aquacultures [Volume 11, Issue 2, 2021, Pages 161-171]
-
Hajiahmad, A.
Evaluation of Several Spectral Indices for Estimation of Canola Yield using Sentinel-2 Sensor Images [Volume 11, Issue 2, 2021, Pages 447-464]
-
Hazbavi, I.
Economical Assessment of Replacing and Refining Methods of Hydraulic Oil of Sugarcane Harvesters in Sugarcane Cultivation Industry of Khuzestan [Volume 11, Issue 1, 2021, Pages 111-122]
-
Heidari, A.
Greenhouse Mobile Robot Navigation Using Wheel Revolution Encoding and Learning Algorithm [Volume 11, Issue 1, 2021, Pages 1-15]
J
-
Jabarzadeh, A.
Greenhouses Energy Supply Modeling Using Renewable Energy in Grid-Connected mode [Volume 11, Issue 2, 2021, Pages 293-303]
-
Jafari, A.
Simulation, Development and Evaluation of an Autonomous Robotic Boat Used in Aquacultures [Volume 11, Issue 2, 2021, Pages 161-171]
-
Javadi Moghaddam, J.
Ventilation and Cooling Modeling and Lyout of Fans, Pads and Vents of an Octagonal Greenhouse [Volume 11, Issue 2, 2021, Pages 247-262]
K
-
Kaab, A.
Analysis of Energy Indicators and Environmental Impacts of Dryland Cantaloupe Production with Life Cycle Assessment Approach (Case Study: Ilam) [Volume 11, Issue 2, 2021, Pages 491-504]
-
Kalantari, D.
Design and Development of a Warning System for Seed Blockage in a One Row Grain Drill [Volume 11, Issue 2, 2021, Pages 131-143]
-
Kalantari, D.
Optimizing the Muffler of a Portable Lawn Mower Engine to reduce Noise Pollution Levels [Volume 11, Issue 2, 2021, Pages 359-369]
-
Karparvarfard, S. H.
Prediction of Seed Flow Rate of a Multi-Slot Rotor Feeding Device of a Corn Planter [Volume 11, Issue 1, 2021, Pages 17-27]
-
Karparvarfard, S. H.
Evaluation of the Effect of Rake Angle on the Performance of a Modified Narrow Blade [Volume 11, Issue 2, 2021, Pages 187-197]
-
Kashaninejad, M.
Investigation of some Energy and Exergy Factors during Ohmic Heating Processing of Sour Orange [Volume 11, Issue 2, 2021, Pages 435-445]
-
Kazemi, N.
Studying some Pollutant Emissions of an Injection Gasoline Engine Using Mixed Fuel of Ethanol, Gasoline and Carbon Nanoparticles [Volume 11, Issue 2, 2021, Pages 213-230]
-
Khoshtaghaza, M. H.
Optimization Effect of Ultrasound on Rupture Force and Kernel Extracting Quality of Walnut using Response Surface Method (RSM) [Volume 11, Issue 2, 2021, Pages 331-342]
-
Kohan, A.
Evaluating Histogram Equalization and Thresholding Methods for Segmentation of Rosa Damascena Flowers in Color Images [Volume 11, Issue 1, 2021, Pages 29-42]
L
-
Loveimi, N.
Evaluation of Several Spectral Indices for Estimation of Canola Yield using Sentinel-2 Sensor Images [Volume 11, Issue 2, 2021, Pages 447-464]
M
-
Mahmoodi, M. J.
Investigating the Effects of Qualitative Properties on Pears Dielectric Coefficient [Volume 11, Issue 1, 2021, Pages 71-81]
-
Malek mohammadi, M.
Studying some Pollutant Emissions of an Injection Gasoline Engine Using Mixed Fuel of Ethanol, Gasoline and Carbon Nanoparticles [Volume 11, Issue 2, 2021, Pages 213-230]
-
Marzban, A.
Economical Assessment of Replacing and Refining Methods of Hydraulic Oil of Sugarcane Harvesters in Sugarcane Cultivation Industry of Khuzestan [Volume 11, Issue 1, 2021, Pages 111-122]
-
Minaei, S.
Evaluating Histogram Equalization and Thresholding Methods for Segmentation of Rosa Damascena Flowers in Color Images [Volume 11, Issue 1, 2021, Pages 29-42]
-
Mirahmadi, F.
Effects of Air Impingement Jet Drying on Drying Kinetics and Some Quality Attributes of Strawberry Slices [Volume 11, Issue 2, 2021, Pages 409-422]
-
Mirzaee Moghaddam, H.
Effect of Pomegranate Seed Oil Encapsulated in Chitosan-capric Acid Nanogels Incorporating Thyme Essential Oil on Physicomechanical and Structural Properties of Jelly Candy [Volume 11, Issue 1, 2021, Pages 55-70]
-
Mirzamohammadi, S.
Greenhouses Energy Supply Modeling Using Renewable Energy in Grid-Connected mode [Volume 11, Issue 2, 2021, Pages 293-303]
-
Moazni Kalat, A.
Evaluation of the Effect of Rake Angle on the Performance of a Modified Narrow Blade [Volume 11, Issue 2, 2021, Pages 187-197]
-
Mohammad Zamani, D.
Effect of Fragmentation of Land on Agricultural Mechanization Development using AHP Technique [Volume 11, Issue 1, 2021, Pages 43-53]
-
Momeni, D.
Ventilation and Cooling Modeling and Lyout of Fans, Pads and Vents of an Octagonal Greenhouse [Volume 11, Issue 2, 2021, Pages 247-262]
-
Monjezi, N.
Ergonomic Evaluation Posture of Sugarcane Workers using REBA Method [Volume 11, Issue 2, 2021, Pages 477-489]
-
Moradi, H.
Analysis of Energy Indicators and Environmental Impacts of Dryland Cantaloupe Production with Life Cycle Assessment Approach (Case Study: Ilam) [Volume 11, Issue 2, 2021, Pages 491-504]
-
Moradi, M.
Energy and Exergy Analysis of Drying Process of Lemon Verbena Leaves in a Solar Dryer [Volume 11, Issue 2, 2021, Pages 423-433]
-
Moradi, N.
Challenges and Opportunities in Development of Agricultural Mechanization in Ahvaz County using SWOT Method [Volume 11, Issue 2, 2021, Pages 535-548]
-
Motevali, A.
Effect of Parameters on the Separation of Almond Shell and Kernel, and Design and Development a Pneumatic Separator [Volume 11, Issue 2, 2021, Pages 173-185]
-
Mousavi Khanghah, A.
Prediction of Seed Flow Rate of a Multi-Slot Rotor Feeding Device of a Corn Planter [Volume 11, Issue 1, 2021, Pages 17-27]
-
Mousavi Seyedi, S. R.
Design and Development of a Warning System for Seed Blockage in a One Row Grain Drill [Volume 11, Issue 2, 2021, Pages 131-143]
-
Mousazadeh, H.
Simulation, Development and Evaluation of an Autonomous Robotic Boat Used in Aquacultures [Volume 11, Issue 2, 2021, Pages 161-171]
-
Mozafari ghoraba, F.
Measuring Mechanical Properties and Simulating the Creep Behavior of Wild Cane Stem using Burger-Voigt Model [Volume 11, Issue 2, 2021, Pages 385-397]
N
-
Nadi, F.
Investigating the Energy Consumption and Economic Indices for Sweet-Cherry and Sour-Cherry Production in Northeastern Iran [Volume 11, Issue 1, 2021, Pages 97-110]
-
Naimei Dizajyekan, S.
Numerical Study of Wheat Conveying in Separator Cyclone using Computational Fluid Dynamics [Volume 11, Issue 2, 2021, Pages 231-246]
-
Najafi, Gh.
Optimization Effect of Ultrasound on Rupture Force and Kernel Extracting Quality of Walnut using Response Surface Method (RSM) [Volume 11, Issue 2, 2021, Pages 331-342]
-
Neisari fam, V.
Effect of Parameters on the Separation of Almond Shell and Kernel, and Design and Development a Pneumatic Separator [Volume 11, Issue 2, 2021, Pages 173-185]
-
Nematpour Malek Abad, H.
Economical Assessment of Replacing and Refining Methods of Hydraulic Oil of Sugarcane Harvesters in Sugarcane Cultivation Industry of Khuzestan [Volume 11, Issue 1, 2021, Pages 111-122]
O
-
Okos, M.
Degree-Day Index for Estimating the Thermal Requirements of a Greenhouse Equipped with an Air-Earth Heat Exchanger System [Volume 11, Issue 1, 2021, Pages 83-95]
-
Ozlati, S.
Ventilation and Cooling Modeling and Lyout of Fans, Pads and Vents of an Octagonal Greenhouse [Volume 11, Issue 2, 2021, Pages 247-262]
P
-
Pashaee, P.
Designing and Constructing an Active Boom Balancing System using a New Technique Variable Fulcrum Method and Comparing It with a Conventional Sprayer [Volume 11, Issue 2, 2021, Pages 145-159]
-
Porabolghasem, M.
Measuring Mechanical Properties and Simulating the Creep Behavior of Wild Cane Stem using Burger-Voigt Model [Volume 11, Issue 2, 2021, Pages 385-397]
-
Pourdarbani, R.
Ranking the Effective Factors in the Technology Acceptance Model for the Actual Use of Agricultural Automation (Case study: Ardebil) [Volume 11, Issue 2, 2021, Pages 525-534]
R
-
Rad, M.
Effects of Air Impingement Jet Drying on Drying Kinetics and Some Quality Attributes of Strawberry Slices [Volume 11, Issue 2, 2021, Pages 409-422]
-
Rahnama, M.
Studying some Pollutant Emissions of an Injection Gasoline Engine Using Mixed Fuel of Ethanol, Gasoline and Carbon Nanoparticles [Volume 11, Issue 2, 2021, Pages 213-230]
-
Rajaie, A.
Effect of Pomegranate Seed Oil Encapsulated in Chitosan-capric Acid Nanogels Incorporating Thyme Essential Oil on Physicomechanical and Structural Properties of Jelly Candy [Volume 11, Issue 1, 2021, Pages 55-70]
-
Ranjbar Karim Abadi, A.
Evaluation of the Effect of Rake Angle on the Performance of a Modified Narrow Blade [Volume 11, Issue 2, 2021, Pages 187-197]
-
Raoufat, M. H.
Prediction of Seed Flow Rate of a Multi-Slot Rotor Feeding Device of a Corn Planter [Volume 11, Issue 1, 2021, Pages 17-27]
-
Rédl, J.
Optimizing the Muffler of a Portable Lawn Mower Engine to reduce Noise Pollution Levels [Volume 11, Issue 2, 2021, Pages 359-369]
-
Rezaei, S.
Modeling of Potato Slice Drying Process in a Microwave Dryer using Artificial Neural Network and Machine Vision [Volume 11, Issue 2, 2021, Pages 263-275]
-
Rezvanivand fanaei, A.
Numerical Study of Wheat Conveying in Separator Cyclone using Computational Fluid Dynamics [Volume 11, Issue 2, 2021, Pages 231-246]
-
Rostampour, V.
Numerical Study of Wheat Conveying in Separator Cyclone using Computational Fluid Dynamics [Volume 11, Issue 2, 2021, Pages 231-246]
S
-
Sabati Gavgani, M.
Effect of Fragmentation of Land on Agricultural Mechanization Development using AHP Technique [Volume 11, Issue 1, 2021, Pages 43-53]
-
Safari, M.
Modeling Grain Losses in Mechanized Harvesting of Oily Sunflower [Volume 11, Issue 2, 2021, Pages 399-408]
-
Safari, M.
Semi-mechanized Harvesting of the Safflower Petals in Comparison with Conventional Method [Volume 11, Issue 2, 2021, Pages 465-475]
-
Salehi Salmi, M.
Feasibility of Online Diagnosis of Botrytis elliptica Disease in the Lilium Plant using the Machine Vision System and K-means [Volume 11, Issue 2, 2021, Pages 277-291]
-
Salehi Shahrabi, M.
Greenhouses Energy Supply Modeling Using Renewable Energy in Grid-Connected mode [Volume 11, Issue 2, 2021, Pages 293-303]
-
Salimi, M.
Ranking the Effective Factors in the Technology Acceptance Model for the Actual Use of Agricultural Automation (Case study: Ardebil) [Volume 11, Issue 2, 2021, Pages 525-534]
-
Sami, M.
Potential Evaluation and Modeling of Biogas Production from Apple Pomace [Volume 11, Issue 2, 2021, Pages 305-316]
-
Sedighi, Sh.
Optimizing the Muffler of a Portable Lawn Mower Engine to reduce Noise Pollution Levels [Volume 11, Issue 2, 2021, Pages 359-369]
-
Shahgholi, Gh.
Numerical Study of Wheat Conveying in Separator Cyclone using Computational Fluid Dynamics [Volume 11, Issue 2, 2021, Pages 231-246]
-
Sharifi, M.
Potential Evaluation and Modeling of Biogas Production from Apple Pomace [Volume 11, Issue 2, 2021, Pages 305-316]
-
Sharifi, M.
Analysis of Energy Indicators and Environmental Impacts of Dryland Cantaloupe Production with Life Cycle Assessment Approach (Case Study: Ilam) [Volume 11, Issue 2, 2021, Pages 491-504]
-
Sharifnasab, H.
Semi-mechanized Harvesting of the Safflower Petals in Comparison with Conventional Method [Volume 11, Issue 2, 2021, Pages 465-475]
-
Sheikhdavoodi, M. J.
Economical Assessment of Replacing and Refining Methods of Hydraulic Oil of Sugarcane Harvesters in Sugarcane Cultivation Industry of Khuzestan [Volume 11, Issue 1, 2021, Pages 111-122]
-
Sheikhdavoodi, M. J.
Challenges and Opportunities in Development of Agricultural Mechanization in Ahvaz County using SWOT Method [Volume 11, Issue 2, 2021, Pages 535-548]
-
Souri Damirchi Sofla, B.
Evaluation of the Effect of Rake Angle on the Performance of a Modified Narrow Blade [Volume 11, Issue 2, 2021, Pages 187-197]
T
-
Tabatabaei koloor, R.
Effect of Parameters on the Separation of Almond Shell and Kernel, and Design and Development a Pneumatic Separator [Volume 11, Issue 2, 2021, Pages 173-185]
V
-
Vahedi, A.
Evaluation Energy Flow and Analysis of Energy Economy for Irrigated Wheat Production in Different Geographical Regions of Iran [Volume 11, Issue 2, 2021, Pages 505-523]
-
Vahedi Torshizi, M.
Investigation of some Energy and Exergy Factors during Ohmic Heating Processing of Sour Orange [Volume 11, Issue 2, 2021, Pages 435-445]
-
Vahid-Berimanlou, R.
Investigating the Energy Consumption and Economic Indices for Sweet-Cherry and Sour-Cherry Production in Northeastern Iran [Volume 11, Issue 1, 2021, Pages 97-110]
Y
-
Yousefvand, A.
Anthracnose Detection on Walnut Tree Leaves using Outdoor Image Processing Methods [Volume 11, Issue 2, 2021, Pages 317-329]
Z
-
Zandi, M.
Applying Adaptive Neuro-Fuzzy Inference System and Artificial Neural Network to the Prediction of Quality changes of Hawthorn Fruit (Crataegus pinnatifida) during Various Storage Conditions [Volume 11, Issue 2, 2021, Pages 343-357]
-
Zareei, J.
The Effect of Compression Ratio and Alternative Fuels on the Performance of Turbocharged Diesel Engine by GT-POWER Software [Volume 11, Issue 2, 2021, Pages 199-212]
-
Zarei, Gh.
Degree-Day Index for Estimating the Thermal Requirements of a Greenhouse Equipped with an Air-Earth Heat Exchanger System [Volume 11, Issue 1, 2021, Pages 83-95]
-
Zarei, Gh.
Ventilation and Cooling Modeling and Lyout of Fans, Pads and Vents of an Octagonal Greenhouse [Volume 11, Issue 2, 2021, Pages 247-262]
-
Zarezadeh, M. R.
Estimation of the Best Classification Algorithm and Fraud Detection of Olive Oil by Olfaction Machine [Volume 11, Issue 2, 2021, Pages 371-383]
-
Zarifneshat, S.
Evaluation Energy Flow and Analysis of Energy Economy for Irrigated Wheat Production in Different Geographical Regions of Iran [Volume 11, Issue 2, 2021, Pages 505-523]