A
-
Abbasi, N.
Effect of nanoclay particles on some physical and mechanical properties of soils [Volume 6, Issue 1, 2016, Pages 250-258]
-
Abbaspour-Fard, M. H.
Genetic algorithm based on optimization of neural network structure for fault diagnosis of the clutch retainer mechanism of MF 285 tractor [Volume 6, Issue 2, 2016, Pages 336-349]
-
Abdanan Mehdizadeh, S.
Optimization of the most important operational parameters of a pneumatic seeder using real-time monitoring for Cucumber and Watermelon seeds [Volume 6, Issue 1, 2016, Pages 35-48]
-
Abdi, R.
Comparison of biogas production from rapeseed and wheat residues in compound with cattle manure [Volume 6, Issue 2, 2016, Pages 476-487]
-
Abdolahzare, Z.
Optimization of the most important operational parameters of a pneumatic seeder using real-time monitoring for Cucumber and Watermelon seeds [Volume 6, Issue 1, 2016, Pages 35-48]
-
Abdollahnejad Barough, A. R.
Sorting of pistachio nuts using image processing techniques and an adaptive neural-fuzzy inference system [Volume 6, Issue 1, 2016, Pages 60-68]
-
Abdollahpour, Sh.
Simulation of neuro-fuzzy model for optimization of combine header setting [Volume 6, Issue 2, 2016, Pages 406-416]
-
Abdollahpour, Sh.
Increasing energy efficiency by geometric modification of hoe-type furrow opener [Volume 6, Issue 2, 2016, Pages 499-509]
-
Aboonajmi, M.
Design, development and test of the gearbox condition monitoring system using sound signal processing [Volume 6, Issue 2, 2016, Pages 322-335]
-
Adelinia, M.
Sorting of pistachio nuts using image processing techniques and an adaptive neural-fuzzy inference system [Volume 6, Issue 1, 2016, Pages 60-68]
-
Afzalinia, S.
Energy indices in irrigated wheat production under conservation and conventional tillage and planting methods [Volume 6, Issue 1, 2016, Pages 236-249]
-
Aghel, H.
Predicting working days for secondary tillage and planting operation in fall [Volume 6, Issue 2, 2016, Pages 537-546]
-
Aghkhani, M. H.
Effect of electrostatic field on dynamic friction coefficient of pistachio [Volume 6, Issue 1, 2016, Pages 126-138]
-
Aghkhani, M. H.
The effect of slicing type on drying kinetics and quality of dried carrot [Volume 6, Issue 1, 2016, Pages 224-235]
-
Aghkhani, M. H.
Genetic algorithm based on optimization of neural network structure for fault diagnosis of the clutch retainer mechanism of MF 285 tractor [Volume 6, Issue 2, 2016, Pages 336-349]
-
Ahmadi, E.
Mechanical property evaluation of apricot fruits under quasi-static and dynamic loading [Volume 6, Issue 1, 2016, Pages 139-152]
-
Ahmadi, E.
Rheological properties of strawberry fruit coating with methylcellulose [Volume 6, Issue 1, 2016, Pages 153-162]
-
Ahmadi, H.
Investigation and analysis the vibration of handles of chainsaw without cutting [Volume 6, Issue 1, 2016, Pages 90-101]
-
Ahmadi, I.
Design, fabrication, and evaluation of a wireless pull-type dynamometer [Volume 6, Issue 2, 2016, Pages 547-556]
-
Ahmadi Moghaddam, P.
Determination of crop residues and the physical and mechanical properties of soil in different tillage systems [Volume 6, Issue 1, 2016, Pages 102-113]
-
Ajabshirchi, Y.
Increasing energy efficiency by geometric modification of hoe-type furrow opener [Volume 6, Issue 2, 2016, Pages 499-509]
-
Amiri Parian, J.
Comparison of the precision of three commonly used GPS models [Volume 6, Issue 1, 2016, Pages 214-223]
-
Amirshaghaghi, F.
Comparison and technical evaluation of electrostatic, micronair and tractor-mounted lance sprayers in order to control (Carpocasa pomonella L) in apple orchards [Volume 6, Issue 2, 2016, Pages 376-383]
-
Arabhosseini, A.
Investigation of one-dimensional heat flow in a solarflat plate collector with sun tracing system [Volume 6, Issue 2, 2016, Pages 451-462]
-
Asaei, H.
Development and evaluation of a targeted orchard sprayer using machine vision technology [Volume 6, Issue 2, 2016, Pages 362-375]
-
Askari Asli–Ardeh, E.
Perfomance investigation of thresher T30 at threshing some common wheat varieties [Volume 6, Issue 1, 2016, Pages 80-89]
-
Asoodar, M. A.
Optimization of the most important operational parameters of a pneumatic seeder using real-time monitoring for Cucumber and Watermelon seeds [Volume 6, Issue 1, 2016, Pages 35-48]
-
Ataei, A.
Investigating and modeling the pyrolysis kinetic of leaves and stems of pistachio trees for biofuel production [Volume 6, Issue 2, 2016, Pages 429-439]
-
Attarzadeh Hossini, S. R.
Ergonomic assessment of brake and accelerator mechanisms of MF285 and MF399 tractors using electromyography method [Volume 6, Issue 1, 2016, Pages 25-34]
-
Azad Takchi, M.
Perfomance investigation of thresher T30 at threshing some common wheat varieties [Volume 6, Issue 1, 2016, Pages 80-89]
B
-
Badii, F.
Storability evaluation of Golab apple with acoustic and penetration methods [Volume 6, Issue 1, 2016, Pages 188-200]
-
Bakhshipour Ziaratgahi, A.
Exploring the possibility of using digital image processing technique to detect diseases of rice leaf [Volume 6, Issue 1, 2016, Pages 69-79]
-
Bannayan Aval, M.
Predicting working days for secondary tillage and planting operation in fall [Volume 6, Issue 2, 2016, Pages 537-546]
-
Baradaran Motie, J.
Effect of electrostatic field on dynamic friction coefficient of pistachio [Volume 6, Issue 1, 2016, Pages 126-138]
-
Barikloo, H.
Mechanical property evaluation of apricot fruits under quasi-static and dynamic loading [Volume 6, Issue 1, 2016, Pages 139-152]
-
Bavafa, M.
Effect of poultry fat oil biodiesel on tractor engine performance [Volume 6, Issue 1, 2016, Pages 14-24]
-
Bayati, M. R.
Storability evaluation of Golab apple with acoustic and penetration methods [Volume 6, Issue 1, 2016, Pages 188-200]
C
-
Chavoshi, E.
Comparison of the precision of three commonly used GPS models [Volume 6, Issue 1, 2016, Pages 214-223]
D
-
Dehghani, S.
Design, development, and evaluation of an automatic guidance system for tractor tracking along the contour line on inclined surfaces [Volume 6, Issue 1, 2016, Pages 1-13]
E
-
Ebrahimi, E.
Genetic algorithm based on optimization of neural network structure for fault diagnosis of the clutch retainer mechanism of MF 285 tractor [Volume 6, Issue 2, 2016, Pages 336-349]
-
Eftekhari, L.
Determination of crop residues and the physical and mechanical properties of soil in different tillage systems [Volume 6, Issue 1, 2016, Pages 102-113]
-
Emadi, B.
Ergonomic assessment of brake and accelerator mechanisms of MF285 and MF399 tractors using electromyography method [Volume 6, Issue 1, 2016, Pages 25-34]
-
Emadi, B.
Determination of elasticity modulus and Poisson ratio of two onion varieties under different loading conditions [Volume 6, Issue 1, 2016, Pages 114-125]
-
Emadi, B.
Determination of ripeness stages of Mazafati variety of date fruit by Raman spectroscopy [Volume 6, Issue 1, 2016, Pages 201-213]
-
Esfanjari Kenari, R.
Investigating the energy pattern of tomato production in Khorasan Razavi province [Volume 6, Issue 2, 2016, Pages 524-536]
-
Eshghi, H.
Effect of poultry fat oil biodiesel on tractor engine performance [Volume 6, Issue 1, 2016, Pages 14-24]
-
Eskandari, I.
Construction of an experimental plot seeder of wheat planting and compare it by imported one [Volume 6, Issue 2, 2016, Pages 298-311]
-
Eyvani, A.
Storability evaluation of Golab apple with acoustic and penetration methods [Volume 6, Issue 1, 2016, Pages 188-200]
F
-
Faraji, A.
Comparison of effects of machine performance parameters and energy indices of soybean production in conservation and conventional tillage systems [Volume 6, Issue 2, 2016, Pages 510-523]
-
Farzad, A.
Effect of poultry fat oil biodiesel on tractor engine performance [Volume 6, Issue 1, 2016, Pages 14-24]
-
Fayyazi, E.
Studying and optimizing the biodiesel production from mastic oil aided by ultrasonic using response surface method [Volume 6, Issue 2, 2016, Pages 440-450]
-
Feyzi, M.
Investigation and analysis the vibration of handles of chainsaw without cutting [Volume 6, Issue 1, 2016, Pages 90-101]
G
-
Ghanbarian, D.
Design, development and evaluation of an automatic metering system for bare root seedlings of onion [Volume 6, Issue 2, 2016, Pages 271-282]
-
Ghasemi-Varnamkhasti, M.
Design, development and evaluation of an automatic metering system for bare root seedlings of onion [Volume 6, Issue 2, 2016, Pages 271-282]
-
Ghazanfari Moghaddam, A.
Investigating and modeling the pyrolysis kinetic of leaves and stems of pistachio trees for biofuel production [Volume 6, Issue 2, 2016, Pages 429-439]
-
Gheshlaghi, F.
Predicting the wheel rolling resistance regarding important motion parameters using the artificial neural network [Volume 6, Issue 1, 2016, Pages 259-270]
-
Ghobadian, B.
Effect of poultry fat oil biodiesel on tractor engine performance [Volume 6, Issue 1, 2016, Pages 14-24]
-
Ghobadian, B.
Studying and optimizing the biodiesel production from mastic oil aided by ultrasonic using response surface method [Volume 6, Issue 2, 2016, Pages 440-450]
-
Golzarian, M. R.
Determination of elasticity modulus and Poisson ratio of two onion varieties under different loading conditions [Volume 6, Issue 1, 2016, Pages 114-125]
H
-
Hafezi, N.
The study of some physical properties and energy aspects of potatoes drying process by the infrared-vacuum method [Volume 6, Issue 2, 2016, Pages 463-475]
-
Hakimi, A.
Perfomance investigation of thresher T30 at threshing some common wheat varieties [Volume 6, Issue 1, 2016, Pages 80-89]
-
Hashmipour-Rafsanjani, H.
Investigating and modeling the pyrolysis kinetic of leaves and stems of pistachio trees for biofuel production [Volume 6, Issue 2, 2016, Pages 429-439]
-
Hassan Beigi Bidgoli, S. R.
Design, development and test of the gearbox condition monitoring system using sound signal processing [Volume 6, Issue 2, 2016, Pages 322-335]
-
Heidari, Sh.
Modeling of the height control system using artificial neural networks [Volume 6, Issue 2, 2016, Pages 350-361]
-
Hemmat, A.
Online weighing of kiwifruit using impact method [Volume 6, Issue 1, 2016, Pages 163-175]
-
Hosseini, S. M.
Energy indices in irrigated wheat production under conservation and conventional tillage and planting methods [Volume 6, Issue 1, 2016, Pages 236-249]
-
Hosseinzdeh Samani, B.
Studying and optimizing the biodiesel production from mastic oil aided by ultrasonic using response surface method [Volume 6, Issue 2, 2016, Pages 440-450]
I
-
Izadi, H.
Tomato grading system using machine vision technology and neuro-fuzzy networks (ANFIS) [Volume 6, Issue 1, 2016, Pages 49-59]
J
-
Jabbari, B.
Comparison of the precision of three commonly used GPS models [Volume 6, Issue 1, 2016, Pages 214-223]
-
Jafari, A.
Investigation and analysis the vibration of handles of chainsaw without cutting [Volume 6, Issue 1, 2016, Pages 90-101]
-
Jafari, A.
Evaluation of effective parameters on fiber separation from calotropis stems in mechanical methods [Volume 6, Issue 2, 2016, Pages 384-395]
-
Jafari, A. A.
Exploring the possibility of using digital image processing technique to detect diseases of rice leaf [Volume 6, Issue 1, 2016, Pages 69-79]
-
Jafari, A. A.
Development and evaluation of a targeted orchard sprayer using machine vision technology [Volume 6, Issue 2, 2016, Pages 362-375]
-
Jafari Malekabadi, A.
Determination of elasticity modulus and Poisson ratio of two onion varieties under different loading conditions [Volume 6, Issue 1, 2016, Pages 114-125]
-
Javidi Gharache, M.
Ergonomic evaluation of tea farmers in north of Iran during plucking using body modeling [Volume 6, Issue 2, 2016, Pages 488-498]
K
-
Kamgar, S.
Tomato grading system using machine vision technology and neuro-fuzzy networks (ANFIS) [Volume 6, Issue 1, 2016, Pages 49-59]
-
Kamgar, S.
Field evaluation of cutter and feeder mechanism of chickpea harvester for lentil harvesting [Volume 6, Issue 2, 2016, Pages 396-405]
-
Kamgar, S.
Determining the most suitable frequency and shaking time for olive harvesting by a pneumatic branch shaker [Volume 6, Issue 2, 2016, Pages 417-428]
-
Karparvarfard, S. H.
Design, development, and evaluation of an automatic guidance system for tractor tracking along the contour line on inclined surfaces [Volume 6, Issue 1, 2016, Pages 1-13]
-
Karparvarfard, S. H.
Development and field evaluation of an intercropping machine for corn and bean [Volume 6, Issue 2, 2016, Pages 283-297]
-
Kazemi, N.
Optimization of the most important operational parameters of a pneumatic seeder using real-time monitoring for Cucumber and Watermelon seeds [Volume 6, Issue 1, 2016, Pages 35-48]
-
Khanali, M.
The effect of dropping impact on bruising pomegranate fruit [Volume 6, Issue 1, 2016, Pages 176-187]
-
Khodabakhshian, R.
Determination of ripeness stages of Mazafati variety of date fruit by Raman spectroscopy [Volume 6, Issue 1, 2016, Pages 201-213]
-
Khodaverdilo, H.
Determination of crop residues and the physical and mechanical properties of soil in different tillage systems [Volume 6, Issue 1, 2016, Pages 102-113]
-
Khojastehpour, M.
Ergonomic assessment of brake and accelerator mechanisms of MF285 and MF399 tractors using electromyography method [Volume 6, Issue 1, 2016, Pages 25-34]
-
Khojastehpour, M.
Determination of elasticity modulus and Poisson ratio of two onion varieties under different loading conditions [Volume 6, Issue 1, 2016, Pages 114-125]
-
Khojastehpour, M.
Ergonomic evaluation of tea farmers in north of Iran during plucking using body modeling [Volume 6, Issue 2, 2016, Pages 488-498]
-
Khorasani, M. E.
The study of some physical properties and energy aspects of potatoes drying process by the infrared-vacuum method [Volume 6, Issue 2, 2016, Pages 463-475]
-
Kianmehr, M. H.
Investigation of one-dimensional heat flow in a solarflat plate collector with sun tracing system [Volume 6, Issue 2, 2016, Pages 451-462]
-
Kosari Moghaddam, A.
Predicting working days for secondary tillage and planting operation in fall [Volume 6, Issue 2, 2016, Pages 537-546]
L
-
Loghavi, M.
Development and evaluation of a targeted orchard sprayer using machine vision technology [Volume 6, Issue 2, 2016, Pages 362-375]
-
Loghavi, M.
Determining the most suitable frequency and shaking time for olive harvesting by a pneumatic branch shaker [Volume 6, Issue 2, 2016, Pages 417-428]
M
-
Mardani, A.
Predicting the wheel rolling resistance regarding important motion parameters using the artificial neural network [Volume 6, Issue 1, 2016, Pages 259-270]
-
Mardani, A.
Determination of crop residues and the physical and mechanical properties of soil in different tillage systems [Volume 6, Issue 1, 2016, Pages 102-113]
-
Mehdipour, Y.
Determining the most suitable frequency and shaking time for olive harvesting by a pneumatic branch shaker [Volume 6, Issue 2, 2016, Pages 417-428]
-
Mir-ahmadi, S. M.
Online weighing of kiwifruit using impact method [Volume 6, Issue 1, 2016, Pages 163-175]
-
Mireei, S. A.
Online weighing of kiwifruit using impact method [Volume 6, Issue 1, 2016, Pages 163-175]
-
Mobli, H.
The effect of dropping impact on bruising pomegranate fruit [Volume 6, Issue 1, 2016, Pages 176-187]
-
Mobli, H.
Storability evaluation of Golab apple with acoustic and penetration methods [Volume 6, Issue 1, 2016, Pages 188-200]
-
Mohamadi, M.
Sorting of pistachio nuts using image processing techniques and an adaptive neural-fuzzy inference system [Volume 6, Issue 1, 2016, Pages 60-68]
-
Mohammadi, A.
Increasing energy efficiency by geometric modification of hoe-type furrow opener [Volume 6, Issue 2, 2016, Pages 499-509]
-
Mohammad Shafie, M.
The effect of dropping impact on bruising pomegranate fruit [Volume 6, Issue 1, 2016, Pages 176-187]
-
Mollaei, K.
Energy indices in irrigated wheat production under conservation and conventional tillage and planting methods [Volume 6, Issue 1, 2016, Pages 236-249]
-
Mondani, A.
Development and field evaluation of an intercropping machine for corn and bean [Volume 6, Issue 2, 2016, Pages 283-297]
-
Mousavi, S. F.
Genetic algorithm based on optimization of neural network structure for fault diagnosis of the clutch retainer mechanism of MF 285 tractor [Volume 6, Issue 2, 2016, Pages 336-349]
-
Mousazadeh, H.
Evaluation of effective parameters on fiber separation from calotropis stems in mechanical methods [Volume 6, Issue 2, 2016, Pages 384-395]
-
Mustafavand, H.
Field evaluation of cutter and feeder mechanism of chickpea harvester for lentil harvesting [Volume 6, Issue 2, 2016, Pages 396-405]
N
-
Nadim, Z.
Rheological properties of strawberry fruit coating with methylcellulose [Volume 6, Issue 1, 2016, Pages 153-162]
-
Naghipour Zade Mahani, M.
The effect of slicing type on drying kinetics and quality of dried carrot [Volume 6, Issue 1, 2016, Pages 224-235]
-
Nikkhah, A.
Ergonomic assessment of brake and accelerator mechanisms of MF285 and MF399 tractors using electromyography method [Volume 6, Issue 1, 2016, Pages 25-34]
-
Noori Gushki, F.
Field evaluation of cutter and feeder mechanism of chickpea harvester for lentil harvesting [Volume 6, Issue 2, 2016, Pages 396-405]
O
-
Ostad Hoseini, M.
Investigating and modeling the pyrolysis kinetic of leaves and stems of pistachio trees for biofuel production [Volume 6, Issue 2, 2016, Pages 429-439]
P
-
Payman, H.
Exploring the possibility of using digital image processing technique to detect diseases of rice leaf [Volume 6, Issue 1, 2016, Pages 69-79]
R
-
Rahimzadeh, R.
Increasing energy efficiency by geometric modification of hoe-type furrow opener [Volume 6, Issue 2, 2016, Pages 499-509]
-
Rahmanian- Koushkaki, H.
Design, development, and evaluation of an automatic guidance system for tractor tracking along the contour line on inclined surfaces [Volume 6, Issue 1, 2016, Pages 1-13]
-
Rahnama, M.
Optimization of the most important operational parameters of a pneumatic seeder using real-time monitoring for Cucumber and Watermelon seeds [Volume 6, Issue 1, 2016, Pages 35-48]
-
Rajabipour, A.
The effect of dropping impact on bruising pomegranate fruit [Volume 6, Issue 1, 2016, Pages 176-187]
-
Rajabipour, A.
Storability evaluation of Golab apple with acoustic and penetration methods [Volume 6, Issue 1, 2016, Pages 188-200]
-
Raoufat, M. H.
Tomato grading system using machine vision technology and neuro-fuzzy networks (ANFIS) [Volume 6, Issue 1, 2016, Pages 49-59]
-
Rezaei, A.
Determining the most suitable frequency and shaking time for olive harvesting by a pneumatic branch shaker [Volume 6, Issue 2, 2016, Pages 417-428]
-
Rezaei, A.
Investigating the energy pattern of tomato production in Khorasan Razavi province [Volume 6, Issue 2, 2016, Pages 524-536]
-
Rostami, M. A.
Fabrication and evaluation of a reservoir tillage machine to reduce runoff from farms with sprinkler irrigation systems [Volume 6, Issue 2, 2016, Pages 312-321]
-
Rostami, S.
Studying and optimizing the biodiesel production from mastic oil aided by ultrasonic using response surface method [Volume 6, Issue 2, 2016, Pages 440-450]
S
-
Sadeghi, M.
Online weighing of kiwifruit using impact method [Volume 6, Issue 1, 2016, Pages 163-175]
-
Sadeghnezhad, H. R.
Comparison of effects of machine performance parameters and energy indices of soybean production in conservation and conventional tillage systems [Volume 6, Issue 2, 2016, Pages 510-523]
-
Sadrnia, H.
Predicting working days for secondary tillage and planting operation in fall [Volume 6, Issue 2, 2016, Pages 537-546]
-
Safari, M.
Comparison and technical evaluation of electrostatic, micronair and tractor-mounted lance sprayers in order to control (Carpocasa pomonella L) in apple orchards [Volume 6, Issue 2, 2016, Pages 376-383]
-
Safari, M.
Comparison of biogas production from rapeseed and wheat residues in compound with cattle manure [Volume 6, Issue 2, 2016, Pages 476-487]
-
Sajadiye, S. M.
The study of some physical properties and energy aspects of potatoes drying process by the infrared-vacuum method [Volume 6, Issue 2, 2016, Pages 463-475]
-
Samimi Akhijahani, H.
Investigation of one-dimensional heat flow in a solarflat plate collector with sun tracing system [Volume 6, Issue 2, 2016, Pages 451-462]
-
Sartipi, N.
Construction of an experimental plot seeder of wheat planting and compare it by imported one [Volume 6, Issue 2, 2016, Pages 298-311]
-
Sartipi, N.
Increasing energy efficiency by geometric modification of hoe-type furrow opener [Volume 6, Issue 2, 2016, Pages 499-509]
-
Shabanzadeh, M.
Investigating the energy pattern of tomato production in Khorasan Razavi province [Volume 6, Issue 2, 2016, Pages 524-536]
-
Sharifi Malvajerdi, A.
Increasing energy efficiency by geometric modification of hoe-type furrow opener [Volume 6, Issue 2, 2016, Pages 499-509]
-
Sharifi Malvajerdi, A.
Comparison of effects of machine performance parameters and energy indices of soybean production in conservation and conventional tillage systems [Volume 6, Issue 2, 2016, Pages 510-523]
-
Sharifnasab, H.
Effect of nanoclay particles on some physical and mechanical properties of soils [Volume 6, Issue 1, 2016, Pages 250-258]
-
Sheikhdavoodi, M. J.
The study of some physical properties and energy aspects of potatoes drying process by the infrared-vacuum method [Volume 6, Issue 2, 2016, Pages 463-475]
-
Soheili Mehdizadeh, A.
Genetic algorithm based on optimization of neural network structure for fault diagnosis of the clutch retainer mechanism of MF 285 tractor [Volume 6, Issue 2, 2016, Pages 336-349]
T
-
Tabasizadeh, M.
Effect of poultry fat oil biodiesel on tractor engine performance [Volume 6, Issue 1, 2016, Pages 14-24]
-
Taghizadeh Tameh, J.
Evaluation of effective parameters on fiber separation from calotropis stems in mechanical methods [Volume 6, Issue 2, 2016, Pages 384-395]
-
Tahavvor, A. R.
Modeling of the height control system using artificial neural networks [Volume 6, Issue 2, 2016, Pages 350-361]
-
Taki, O.
Design, development and evaluation of an automatic metering system for bare root seedlings of onion [Volume 6, Issue 2, 2016, Pages 271-282]
-
Tarabi, N.
Evaluation of effective parameters on fiber separation from calotropis stems in mechanical methods [Volume 6, Issue 2, 2016, Pages 384-395]
-
Tohri, M.
Design, development and evaluation of an automatic metering system for bare root seedlings of onion [Volume 6, Issue 2, 2016, Pages 271-282]
Z
-
Zamani, M.
Design, development and test of the gearbox condition monitoring system using sound signal processing [Volume 6, Issue 2, 2016, Pages 322-335]
-
Zareei, S.
Simulation of neuro-fuzzy model for optimization of combine header setting [Volume 6, Issue 2, 2016, Pages 406-416]
-
Zarrinchang, P.
Modeling of the height control system using artificial neural networks [Volume 6, Issue 2, 2016, Pages 350-361]