A
-
Abdanan Mehdizadeh, S.
Study of the operational parameters of crops turbine sprayer (turbo liner) on spray quality and diameter of droplets, using image processing [Volume 7, Issue 1, 2017, Pages 61-72]
-
Abdanan Mehdizadeh, S.
Comparing between predicted output temperature of flat-plate solar collector and experimental results: computational fluid dynamics and artificial neural network [Volume 7, Issue 1, 2017, Pages 298-311]
-
Abedi, H.
Analysis of factors affecting the mechanical olive harvesting in Guilan province [Volume 7, Issue 1, 2017, Pages 48-60]
-
Aboonajmi, M.
Investigation on the Ultrasonic Nozzle Parameters Affecting Physical Properties of Tomato Powder [Volume 7, Issue 2, 2017, Pages 427-438]
-
Afzali Gorouh, H.
Remote Sensing of Residue Management in Farms using Landsat 8 Sensor Imagery [Volume 7, Issue 2, 2017, Pages 388-400]
-
Aghbashlo, M.
Detecting Adulteration in Lotus Honey Using a Machine Olfactory System [Volume 7, Issue 2, 2017, Pages 439-450]
-
Aghel, H.
Analysis of different inputs share and determination of energy Indices in broilers production in Mashhad city [Volume 7, Issue 1, 2017, Pages 285-297]
-
Ajabshirchi, Y.
Evaluation of heat transfer mathematical models and multiple linear regression to predict the inside variables in semi-solar greenhouse [Volume 7, Issue 1, 2017, Pages 204-220]
-
Ajabshirchi, Y.
Investigating the Effect of a North Wall on Energy Consumption of an East–West Oriented Single Span Greenhouse [Volume 7, Issue 2, 2017, Pages 350-363]
-
Akbarnia, A.
Design and fabrication of an exprerimental model of a seeding unit with widthwise sugarcane scions seeding for use in sugarcane planter [Volume 7, Issue 1, 2017, Pages 312-321]
-
Alighale, S.
Study and Evaluation of Ultrasound System for Detecting the Height of Corn Canopy [Volume 7, Issue 2, 2017, Pages 379-387]
-
Alighaleh, P.
Study and Evaluation of Ultrasound System for Detecting the Height of Corn Canopy [Volume 7, Issue 2, 2017, Pages 379-387]
-
Allahyari, M. S.
Analysis of factors affecting the mechanical olive harvesting in Guilan province [Volume 7, Issue 1, 2017, Pages 48-60]
-
Almassi, M.
Comparison of Management-Operational Efficiency of Agricultural Machinery Operating Systems (Case Study Alborz Province) [Volume 7, Issue 2, 2017, Pages 503-513]
-
Andekaeizadeh, K.
The selection of best tillage implements in terms of energy use efficiency using simple additive weighting methodology [Volume 7, Issue 1, 2017, Pages 37-47]
-
Arefi, A.
Non-destructive prediction of apple firmness during storage based on dynamic speckle patterns [Volume 7, Issue 1, 2017, Pages 140-151]
-
Arjomandi, M. R.
Investigation on the Ultrasonic Nozzle Parameters Affecting Physical Properties of Tomato Powder [Volume 7, Issue 2, 2017, Pages 427-438]
-
Asoodar, M. A.
Study of the operational parameters of crops turbine sprayer (turbo liner) on spray quality and diameter of droplets, using image processing [Volume 7, Issue 1, 2017, Pages 61-72]
-
Azizi, A.
Evaluation and comparing of natural and forced solar dryer for mint drying in Khuzestan province [Volume 7, Issue 1, 2017, Pages 114-125]
B
-
Bagheri, H.
Using of dimensional analysis to determine the parameters of gravity separator table device to minimize impurities in bulk lentils [Volume 7, Issue 1, 2017, Pages 247-259]
-
Bahmanpour, H.
The Effect of Temperature and Drying Method on Drying Time and Color Quality of Mint [Volume 7, Issue 2, 2017, Pages 415-426]
-
Bakhshipour Ziaratgahi, A.
Application of generalized Hough transform for detecting sugar beet plant from weed using machine vision method [Volume 7, Issue 1, 2017, Pages 73-85]
-
Barzegar Tabrizi, M.
Analytical and Experimental Draft Force Evaluation of Plastic Coated Chisel Tines [Volume 7, Issue 2, 2017, Pages 480-490]
-
Behbahani, L.
Evaluation and comparing of natural and forced solar dryer for mint drying in Khuzestan province [Volume 7, Issue 1, 2017, Pages 114-125]
-
Beheshti, B.
Investigation of voltage gradient and electrode type effects on processing time, energy consumption and product quality in production of Tomato Paste by ohmic heating [Volume 7, Issue 1, 2017, Pages 152-164]
-
Behzadi Pour, F.
Study of the operational parameters of crops turbine sprayer (turbo liner) on spray quality and diameter of droplets, using image processing [Volume 7, Issue 1, 2017, Pages 61-72]
-
Besharati, Sh.
The effect of injection timing on energy and exergy analysis of a diesel engine with biodiesel fuel [Volume 7, Issue 1, 2017, Pages 177-191]
-
Borghaee, A. M.
Investigation of voltage gradient and electrode type effects on processing time, energy consumption and product quality in production of Tomato Paste by ohmic heating [Volume 7, Issue 1, 2017, Pages 152-164]
-
Borghaee, A. M.
Comparison of Management-Operational Efficiency of Agricultural Machinery Operating Systems (Case Study Alborz Province) [Volume 7, Issue 2, 2017, Pages 503-513]
C
-
Chegini, Gh. R.
Investigation on the Ultrasonic Nozzle Parameters Affecting Physical Properties of Tomato Powder [Volume 7, Issue 2, 2017, Pages 427-438]
D
-
Dehghannya, J.
Mathematical simulation of heat and mass transfer in convectional drying of carrot, pretreated by ultrasound and microwave [Volume 7, Issue 1, 2017, Pages 97-113]
-
Dini, A.
The Effect of Temperature and Air Velocity on Drying Kinetics of Pistachio Nuts during Roasting by using Hot Air Flow [Volume 7, Issue 2, 2017, Pages 401-414]
-
Doroozi, M.
The effect of acoustic system variables on sound signals of Melon varieties [Volume 7, Issue 1, 2017, Pages 126-139]
E
-
Ebrahimi, R.
Qualitative and quantitative analysis of biogas generated from co-digestion of cow dung, municipal sewage and kitchen waste [Volume 7, Issue 1, 2017, Pages 192-203]
-
Emam, Y.
Application of generalized Hough transform for detecting sugar beet plant from weed using machine vision method [Volume 7, Issue 1, 2017, Pages 73-85]
-
Eskandari, I.
Influence of Conservation Tillage on some Soil Physical Properties and Crop Yield in Vetch-Wheat Rotation in Dryland Cold Region [Volume 7, Issue 2, 2017, Pages 451-467]
F
-
Farhadi, A.
The effect of injection timing on energy and exergy analysis of a diesel engine with biodiesel fuel [Volume 7, Issue 1, 2017, Pages 177-191]
-
Farrokhi Teimourlou, R.
Study and modeling of changes in volumetric efficiency of helix conveyors at different rotational speeds and inclination angels by ANFIS and statistical methods [Volume 7, Issue 1, 2017, Pages 234-246]
-
Feiziasl, V.
Influence of Conservation Tillage on some Soil Physical Properties and Crop Yield in Vetch-Wheat Rotation in Dryland Cold Region [Volume 7, Issue 2, 2017, Pages 451-467]
-
Firouzi, S.
Analysis of factors affecting the mechanical olive harvesting in Guilan province [Volume 7, Issue 1, 2017, Pages 48-60]
G
-
Ghasemi Mobtaker, H.
Investigating the Effect of a North Wall on Energy Consumption of an East–West Oriented Single Span Greenhouse [Volume 7, Issue 2, 2017, Pages 350-363]
-
Ghasemi-Nejad Raeini, M.
Study of the operational parameters of crops turbine sprayer (turbo liner) on spray quality and diameter of droplets, using image processing [Volume 7, Issue 1, 2017, Pages 61-72]
-
Ghasemi-Pirbaloti, A.
Qualitative and quantitative analysis of biogas generated from co-digestion of cow dung, municipal sewage and kitchen waste [Volume 7, Issue 1, 2017, Pages 192-203]
-
Ghasemi-Varnamkhasti, M.
Detecting Adulteration in Lotus Honey Using a Machine Olfactory System [Volume 7, Issue 2, 2017, Pages 439-450]
-
Ghobadian, B.
The effect of injection timing on energy and exergy analysis of a diesel engine with biodiesel fuel [Volume 7, Issue 1, 2017, Pages 177-191]
-
Gholami, H.
Testing and evaluation of a rototiller with new ridged blades [Volume 7, Issue 1, 2017, Pages 26-36]
-
Gholami, H.
Ergonomic Evaluation of Vibrations of a Rototiller with New Blade [Volume 7, Issue 2, 2017, Pages 491-502]
-
Gholamrezaei, N.
Temperature, Humidity and Energy Consumption Forecasting in the Poultry Hall Using Artificial Neural Networknetwork [Volume 7, Issue 2, 2017, Pages 546-557]
H
-
Habibi Asl, J.
Evaluation and comparing of natural and forced solar dryer for mint drying in Khuzestan province [Volume 7, Issue 1, 2017, Pages 114-125]
-
Hajinezhad, M.
Detecting Adulteration in Lotus Honey Using a Machine Olfactory System [Volume 7, Issue 2, 2017, Pages 439-450]
-
Hashemi, S. J.
Analytical and Experimental Draft Force Evaluation of Plastic Coated Chisel Tines [Volume 7, Issue 2, 2017, Pages 480-490]
-
Hassan Beigi Bidgoli, S. R.
The effect of acoustic system variables on sound signals of Melon varieties [Volume 7, Issue 1, 2017, Pages 126-139]
-
Hosseini, S. E.
Investigation of voltage gradient and electrode type effects on processing time, energy consumption and product quality in production of Tomato Paste by ohmic heating [Volume 7, Issue 1, 2017, Pages 152-164]
-
Hosseini, S. M.
Development of a Grapevine Pruning Algorithm for Using in Pruning [Volume 7, Issue 2, 2017, Pages 323-335]
-
Hosseinpour, S.
Creation Greenhouse Environment Map Using Localization of Edge of Cultivation Platforms Based on Stereo Vision [Volume 7, Issue 2, 2017, Pages 336-349]
J
-
Jafari, A. A.
Application of generalized Hough transform for detecting sugar beet plant from weed using machine vision method [Volume 7, Issue 1, 2017, Pages 73-85]
-
Jafari, A. A.
Development of a Grapevine Pruning Algorithm for Using in Pruning [Volume 7, Issue 2, 2017, Pages 323-335]
-
Jafari, M.
Experimental Investigation of a Solar Greenhouse Heating System Equipped with a Parabolic Trough Solar Concentrator and a Double-Purpose Flat Plate Solar Collector [Volume 7, Issue 2, 2017, Pages 364-378]
-
Jafari Naeimi, K.
Numerical analysis of using hybrid photovoltaic-thermal solar water heater in Iran [Volume 7, Issue 1, 2017, Pages 221-233]
-
Jafari Naeimi, K.
Temperature, Humidity and Energy Consumption Forecasting in the Poultry Hall Using Artificial Neural Networknetwork [Volume 7, Issue 2, 2017, Pages 546-557]
-
Jafari Naeimi, K.
Experimental Investigation of a Solar Greenhouse Heating System Equipped with a Parabolic Trough Solar Concentrator and a Double-Purpose Flat Plate Solar Collector [Volume 7, Issue 2, 2017, Pages 364-378]
-
Jamshidi, B.
Non-destructive prediction of apple firmness during storage based on dynamic speckle patterns [Volume 7, Issue 1, 2017, Pages 140-151]
-
Javadikia, H.
Investigating the engine vibration in MF285 tractor effected by different blends of biodiesel fuel using statistical methods and ANFIS [Volume 7, Issue 1, 2017, Pages 165-176]
-
Javadikia, H.
Optimization of hydrodynamic cavitations reactor efficiency for biodiesel production by response surface methods (Case study: Sunflower oil) [Volume 7, Issue 1, 2017, Pages 260-269]
K
-
Kalantari, D.
Testing and evaluation of a rototiller with new ridged blades [Volume 7, Issue 1, 2017, Pages 26-36]
-
Kalantari, D.
Ergonomic Evaluation of Vibrations of a Rototiller with New Blade [Volume 7, Issue 2, 2017, Pages 491-502]
-
Kamgar, S.
Application of generalized Hough transform for detecting sugar beet plant from weed using machine vision method [Volume 7, Issue 1, 2017, Pages 73-85]
-
Karimi, R.
Analytical and Experimental Draft Force Evaluation of Plastic Coated Chisel Tines [Volume 7, Issue 2, 2017, Pages 480-490]
-
Karparvarfard, S. H.
Modeling and Optimization of Wing Geometry Effect on Draft and Vertical Forces of Winged Chisel Plow [Volume 7, Issue 2, 2017, Pages 468-479]
-
Khederli, V.
Identifying and prioritizing customer requirements from tractor production by QFD method [Volume 7, Issue 1, 2017, Pages 270-284]
-
Khojastehpour, M.
Analysis of different inputs share and determination of energy Indices in broilers production in Mashhad city [Volume 7, Issue 1, 2017, Pages 285-297]
-
Khorasani, M. E.
The selection of best tillage implements in terms of energy use efficiency using simple additive weighting methodology [Volume 7, Issue 1, 2017, Pages 37-47]
-
Khoshnam, F.
The effect of acoustic system variables on sound signals of Melon varieties [Volume 7, Issue 1, 2017, Pages 126-139]
-
Kianmehr, M. H.
Using of dimensional analysis to determine the parameters of gravity separator table device to minimize impurities in bulk lentils [Volume 7, Issue 1, 2017, Pages 247-259]
-
Komarizade, M. H.
Study and modeling of changes in volumetric efficiency of helix conveyors at different rotational speeds and inclination angels by ANFIS and statistical methods [Volume 7, Issue 1, 2017, Pages 234-246]
-
Koocheki, A.
The Effect of Temperature and Air Velocity on Drying Kinetics of Pistachio Nuts during Roasting by using Hot Air Flow [Volume 7, Issue 2, 2017, Pages 401-414]
L
-
Loghavi, M.
Development and evaluation of a vibratory-pneumatic pomegranate arils extractor [Volume 7, Issue 1, 2017, Pages 1-12]
M
-
Maharlooei, M.
Experimental Investigation of a Solar Greenhouse Heating System Equipped with a Parabolic Trough Solar Concentrator and a Double-Purpose Flat Plate Solar Collector [Volume 7, Issue 2, 2017, Pages 364-378]
-
Mahdiyeh Broujeni, F.
Fractal analysis of sound signals in SAMPO 3065 combine harvester [Volume 7, Issue 1, 2017, Pages 86-96]
-
Mahmoodi-Eshkaftaki, M.
Qualitative and quantitative analysis of biogas generated from co-digestion of cow dung, municipal sewage and kitchen waste [Volume 7, Issue 1, 2017, Pages 192-203]
-
Malaekeh-Nikouei, B.
The Effect of Temperature and Air Velocity on Drying Kinetics of Pistachio Nuts during Roasting by using Hot Air Flow [Volume 7, Issue 2, 2017, Pages 401-414]
-
Maleki, A.
Fractal analysis of sound signals in SAMPO 3065 combine harvester [Volume 7, Issue 1, 2017, Pages 86-96]
-
Marzban, A.
Study of the operational parameters of crops turbine sprayer (turbo liner) on spray quality and diameter of droplets, using image processing [Volume 7, Issue 1, 2017, Pages 61-72]
-
Marzban, A.
Identifying and Prioritizing the Effective Parameters on Lack of Timeliness of Operations of Sugarcane Production using Analytical Hierarchy Process (AHP) [Volume 7, Issue 2, 2017, Pages 514-526]
-
Matloobi, M.
Evaluation of heat transfer mathematical models and multiple linear regression to predict the inside variables in semi-solar greenhouse [Volume 7, Issue 1, 2017, Pages 204-220]
-
Matloobi, M.
Investigating the Effect of a North Wall on Energy Consumption of an East–West Oriented Single Span Greenhouse [Volume 7, Issue 2, 2017, Pages 350-363]
-
Mesri Gundoshmian, T.
Study and Evaluation of Ultrasound System for Detecting the Height of Corn Canopy [Volume 7, Issue 2, 2017, Pages 379-387]
-
Minaei, S.
Non-destructive prediction of apple firmness during storage based on dynamic speckle patterns [Volume 7, Issue 1, 2017, Pages 140-151]
-
Mobli, H.
Creation Greenhouse Environment Map Using Localization of Edge of Cultivation Platforms Based on Stereo Vision [Volume 7, Issue 2, 2017, Pages 336-349]
-
Mohamadi-Monavar, H.
The Effect of Sample Size and Data Numbering on Precision of Calibration Model to predict Soil Properties [Volume 7, Issue 2, 2017, Pages 536-545]
-
Mohammadi Sarduei, M.
Numerical analysis of using hybrid photovoltaic-thermal solar water heater in Iran [Volume 7, Issue 1, 2017, Pages 221-233]
-
Mohtasebi, S. S.
Investigating the engine vibration in MF285 tractor effected by different blends of biodiesel fuel using statistical methods and ANFIS [Volume 7, Issue 1, 2017, Pages 165-176]
-
Mohtasebi, S. S.
Detecting Adulteration in Lotus Honey Using a Machine Olfactory System [Volume 7, Issue 2, 2017, Pages 439-450]
-
Monjezi, N.
Identifying and Prioritizing the Effective Parameters on Lack of Timeliness of Operations of Sugarcane Production using Analytical Hierarchy Process (AHP) [Volume 7, Issue 2, 2017, Pages 514-526]
-
Mortezapour, H.
Numerical analysis of using hybrid photovoltaic-thermal solar water heater in Iran [Volume 7, Issue 1, 2017, Pages 221-233]
-
Mortezapour, H.
Experimental Investigation of a Solar Greenhouse Heating System Equipped with a Parabolic Trough Solar Concentrator and a Double-Purpose Flat Plate Solar Collector [Volume 7, Issue 2, 2017, Pages 364-378]
-
Mostafaei, M.
Investigating the engine vibration in MF285 tractor effected by different blends of biodiesel fuel using statistical methods and ANFIS [Volume 7, Issue 1, 2017, Pages 165-176]
-
Mostafaei, M.
Optimization of hydrodynamic cavitations reactor efficiency for biodiesel production by response surface methods (Case study: Sunflower oil) [Volume 7, Issue 1, 2017, Pages 260-269]
N
-
Naderloo, L.
Investigating the engine vibration in MF285 tractor effected by different blends of biodiesel fuel using statistical methods and ANFIS [Volume 7, Issue 1, 2017, Pages 165-176]
-
Naderloo, L.
Study and modeling of changes in volumetric efficiency of helix conveyors at different rotational speeds and inclination angels by ANFIS and statistical methods [Volume 7, Issue 1, 2017, Pages 234-246]
-
Naderloo, L.
Optimization of hydrodynamic cavitations reactor efficiency for biodiesel production by response surface methods (Case study: Sunflower oil) [Volume 7, Issue 1, 2017, Pages 260-269]
-
Nadi, F.
Comparing between predicted output temperature of flat-plate solar collector and experimental results: computational fluid dynamics and artificial neural network [Volume 7, Issue 1, 2017, Pages 298-311]
-
Najafi, B.
Study and Evaluation of Ultrasound System for Detecting the Height of Corn Canopy [Volume 7, Issue 2, 2017, Pages 379-387]
-
Namjoo, M.
The effect of acoustic system variables on sound signals of Melon varieties [Volume 7, Issue 1, 2017, Pages 126-139]
-
Nasiri, A.
Creation Greenhouse Environment Map Using Localization of Edge of Cultivation Platforms Based on Stereo Vision [Volume 7, Issue 2, 2017, Pages 336-349]
-
Nassiri, S. M.
Development and evaluation of a vibratory-pneumatic pomegranate arils extractor [Volume 7, Issue 1, 2017, Pages 1-12]
-
Nassiri, S. M.
Application of generalized Hough transform for detecting sugar beet plant from weed using machine vision method [Volume 7, Issue 1, 2017, Pages 73-85]
-
Nikbakht, A. M.
Design, construction and evaluation of solar flat-plate collector simulator based on the thermohydraulic coefficient [Volume 7, Issue 1, 2017, Pages 13-25]
-
Nosrati, Y.
Optimization of hydrodynamic cavitations reactor efficiency for biodiesel production by response surface methods (Case study: Sunflower oil) [Volume 7, Issue 1, 2017, Pages 260-269]
-
Nourani Zonouz, O.
Comparing between predicted output temperature of flat-plate solar collector and experimental results: computational fluid dynamics and artificial neural network [Volume 7, Issue 1, 2017, Pages 298-311]
O
-
Omidi, A.
Comparison of Management-Operational Efficiency of Agricultural Machinery Operating Systems (Case Study Alborz Province) [Volume 7, Issue 2, 2017, Pages 503-513]
Q
-
Qaderi, K.
Temperature, Humidity and Energy Consumption Forecasting in the Poultry Hall Using Artificial Neural Networknetwork [Volume 7, Issue 2, 2017, Pages 546-557]
R
-
Rafiee, Sh.
Creation Greenhouse Environment Map Using Localization of Edge of Cultivation Platforms Based on Stereo Vision [Volume 7, Issue 2, 2017, Pages 336-349]
-
Rahmati Aidinlou, H.
Design, construction and evaluation of solar flat-plate collector simulator based on the thermohydraulic coefficient [Volume 7, Issue 1, 2017, Pages 13-25]
-
Rajabi Vandechali, M.
Testing and evaluation of a rototiller with new ridged blades [Volume 7, Issue 1, 2017, Pages 26-36]
-
Rajabi Vandechali, M.
Ergonomic Evaluation of Vibrations of a Rototiller with New Blade [Volume 7, Issue 2, 2017, Pages 491-502]
-
Ranjbar, S. F.
Evaluation of heat transfer mathematical models and multiple linear regression to predict the inside variables in semi-solar greenhouse [Volume 7, Issue 1, 2017, Pages 204-220]
-
Ranjbar, S. F.
Investigating the Effect of a North Wall on Energy Consumption of an East–West Oriented Single Span Greenhouse [Volume 7, Issue 2, 2017, Pages 350-363]
-
Rasekh, M.
Using of dimensional analysis to determine the parameters of gravity separator table device to minimize impurities in bulk lentils [Volume 7, Issue 1, 2017, Pages 247-259]
-
Razavi, S. M. A.
The Effect of Temperature and Air Velocity on Drying Kinetics of Pistachio Nuts during Roasting by using Hot Air Flow [Volume 7, Issue 2, 2017, Pages 401-414]
-
Rohani, A.
Evaluation of heat transfer mathematical models and multiple linear regression to predict the inside variables in semi-solar greenhouse [Volume 7, Issue 1, 2017, Pages 204-220]
-
Rostami, M. A.
Remote Sensing of Residue Management in Farms using Landsat 8 Sensor Imagery [Volume 7, Issue 2, 2017, Pages 388-400]
-
Rostami, S.
The effect of injection timing on energy and exergy analysis of a diesel engine with biodiesel fuel [Volume 7, Issue 1, 2017, Pages 177-191]
-
Rostami Baroji, R.
Mathematical simulation of heat and mass transfer in convectional drying of carrot, pretreated by ultrasound and microwave [Volume 7, Issue 1, 2017, Pages 97-113]
S
-
Sadrnia, H.
Analysis of different inputs share and determination of energy Indices in broilers production in Mashhad city [Volume 7, Issue 1, 2017, Pages 285-297]
-
Safrangian, A.
Investigating the engine vibration in MF285 tractor effected by different blends of biodiesel fuel using statistical methods and ANFIS [Volume 7, Issue 1, 2017, Pages 165-176]
-
Saiedi Rashk Olya, A.
Analysis of different inputs share and determination of energy Indices in broilers production in Mashhad city [Volume 7, Issue 1, 2017, Pages 285-297]
-
Sajadiye, S. M.
The Effect of Temperature and Drying Method on Drying Time and Color Quality of Mint [Volume 7, Issue 2, 2017, Pages 415-426]
-
Salar, M. R.
Modeling and Optimization of Wing Geometry Effect on Draft and Vertical Forces of Winged Chisel Plow [Volume 7, Issue 2, 2017, Pages 468-479]
-
Samsami, S.
Development and evaluation of a vibratory-pneumatic pomegranate arils extractor [Volume 7, Issue 1, 2017, Pages 1-12]
-
Sedaghat, N.
The Effect of Temperature and Air Velocity on Drying Kinetics of Pistachio Nuts during Roasting by using Hot Air Flow [Volume 7, Issue 2, 2017, Pages 401-414]
-
Seiiedlou Heris, S. S.
Mathematical simulation of heat and mass transfer in convectional drying of carrot, pretreated by ultrasound and microwave [Volume 7, Issue 1, 2017, Pages 97-113]
-
Shamsi, B.
Identifying and prioritizing customer requirements from tractor production by QFD method [Volume 7, Issue 1, 2017, Pages 270-284]
-
Sheikhdavoodi, M. J.
The selection of best tillage implements in terms of energy use efficiency using simple additive weighting methodology [Volume 7, Issue 1, 2017, Pages 37-47]
-
Sheikhdavoodi, M. J.
The Effect of Temperature and Drying Method on Drying Time and Color Quality of Mint [Volume 7, Issue 2, 2017, Pages 415-426]
-
Sheikhdavoodi, M. J.
Identifying and Prioritizing the Effective Parameters on Lack of Timeliness of Operations of Sugarcane Production using Analytical Hierarchy Process (AHP) [Volume 7, Issue 2, 2017, Pages 514-526]
-
Shomeili, M.
Identifying and Prioritizing the Effective Parameters on Lack of Timeliness of Operations of Sugarcane Production using Analytical Hierarchy Process (AHP) [Volume 7, Issue 2, 2017, Pages 514-526]
T
-
Tabatabaei, M.
Optimization of hydrodynamic cavitations reactor efficiency for biodiesel production by response surface methods (Case study: Sunflower oil) [Volume 7, Issue 1, 2017, Pages 260-269]
-
Taghinazhad, J.
Comparison of Technical and Economical Effect of Different Planters using Varied Seed Rates on Canola Yield in Moghan Region [Volume 7, Issue 2, 2017, Pages 527-535]
-
Taghizadeh, H.
Identifying and prioritizing customer requirements from tractor production by QFD method [Volume 7, Issue 1, 2017, Pages 270-284]
-
Taki, M.
Evaluation of heat transfer mathematical models and multiple linear regression to predict the inside variables in semi-solar greenhouse [Volume 7, Issue 1, 2017, Pages 204-220]
-
Torkian Boldaji, M.
Investigation of voltage gradient and electrode type effects on processing time, energy consumption and product quality in production of Tomato Paste by ohmic heating [Volume 7, Issue 1, 2017, Pages 152-164]
Z
-
Zaki Dizaji, H.
Identifying and Prioritizing the Effective Parameters on Lack of Timeliness of Operations of Sugarcane Production using Analytical Hierarchy Process (AHP) [Volume 7, Issue 2, 2017, Pages 514-526]
-
Zare, D.
Application of generalized Hough transform for detecting sugar beet plant from weed using machine vision method [Volume 7, Issue 1, 2017, Pages 73-85]
-
Zareei, A.
Study and modeling of changes in volumetric efficiency of helix conveyors at different rotational speeds and inclination angels by ANFIS and statistical methods [Volume 7, Issue 1, 2017, Pages 234-246]
-
Ziyaei Hajipirlu, M.
Identifying and prioritizing customer requirements from tractor production by QFD method [Volume 7, Issue 1, 2017, Pages 270-284]
-
Zolfaghari, M.
The Effect of Temperature and Drying Method on Drying Time and Color Quality of Mint [Volume 7, Issue 2, 2017, Pages 415-426]