Abbaspour Gilandeh, Y. Comparison of Mathematical Modeling, Artificial Neural Networks and Fuzzy Logic for Predicting the Moisture Ratio of Garlic and Shallot in a Fluidized Bed Dryer [Volume 9, Issue 1, 2019, Pages 99-112]
Abdanan Mehdizadeh, S. Designing and Developing a Machine Vision System to Predict the Chlorophyll and Carotenoid Content of Plant Leaves [Volume 9, Issue 2, 2019, Pages 279-293]
Afsharnia, F. Risk Analysis of Sugarcane Stem Transportation Operation Delays Using the FMEA-ANP Hybrid Approach [Volume 9, Issue 2, 2019, Pages 455-467]
Aghkhani, M. H. Modeling the Effective Parameters on Accuracy of Soil Electrical Conductivity Measurement Systems Using RBF Neural Network [Volume 9, Issue 1, 2019, Pages 139-154]
Ahmadi, E. Effect of Chitosan Coating on Physical, Mechanical and Chemical Properties of Grapes during Storage [Volume 9, Issue 2, 2019, Pages 347-364]
Ahmadi Moghaddam, P. Kiwifruit Classification using Impact- Acoustic Technique and Artificial Neural Network [Volume 9, Issue 2, 2019, Pages 337-346]
Akhavan, F. Structural and Performance Evaluation of a Pollen-duster, Designed for Date Farms [Volume 9, Issue 2, 2019, Pages 427-438]
Akram, A. Locating Advisory and Agricultural Engineering Service Network using Set Covering Model [Volume 9, Issue 1, 2019, Pages 221-233]
Alimardani, R. Study of Potential, Characteristics and Parameters of the Wind Energy Case study: Dehloran County [Volume 9, Issue 1, 2019, Pages 195-208]
Amiri Chayjan, R. Comparison of Mathematical Modeling, Artificial Neural Networks and Fuzzy Logic for Predicting the Moisture Ratio of Garlic and Shallot in a Fluidized Bed Dryer [Volume 9, Issue 1, 2019, Pages 99-112]
Amiri Parian, J. Identification and Counting of Two Important Greenhouse Pests by Image Processing, Case Study: Whitefly and Thrips [Volume 9, Issue 2, 2019, Pages 309-320]
Azadshahraki, F. Impact of Parboiling on some Characteristics of Rice (Champa Variety) [Volume 9, Issue 2, 2019, Pages 375-384]
B
Bahrami, H. Modeling of the Variables that Influence Sugarcane Yield using C5.0 and QUEST Decision Tree Algorithms [Volume 9, Issue 2, 2019, Pages 469-484]
Baradaran Motie, J. Modeling the Effective Parameters on Accuracy of Soil Electrical Conductivity Measurement Systems Using RBF Neural Network [Volume 9, Issue 1, 2019, Pages 139-154]
Biabi, H. Designing and Developing a Machine Vision System to Predict the Chlorophyll and Carotenoid Content of Plant Leaves [Volume 9, Issue 2, 2019, Pages 279-293]
Borghaee, A. M. Energy Consumption Analysis and Environmental Impact Assessment of Grape Production in Hazavah Region of Arak City [Volume 9, Issue 1, 2019, Pages 177-193]
Bougari, E. Impact of Parboiling on some Characteristics of Rice (Champa Variety) [Volume 9, Issue 2, 2019, Pages 375-384]
D
Dehghan-Hesar, H. Design and Evaluation of Two New Biomimetic Blades for Reducing the Shear Energy Required for Cutting Herbal Plants [Volume 9, Issue 2, 2019, Pages 265-278]
E
Ebrahimi-Nik, M. A. Fabrication and Evaluation of a Portable Biomass Stove for Implementing in Regions without Access to Natural Gas Distribution Network [Volume 9, Issue 1, 2019, Pages 209-220]
F
Farhangi, O. Online Identification of Defect Bottles in Production Line of Soft Drink using Machine Vision [Volume 9, Issue 1, 2019, Pages 123-137]
Fayyaz, P. Development and Evaluation of an Electronic Nose System Based on MOS Sensors to Detect and to Distinguish Lemon Essential Oils [Volume 9, Issue 2, 2019, Pages 253-263]
G
Gazor, H. R. Numerical Simulation of Conventional and Porch Patterns for Air Inlet Channel in Paddy Dryer [Volume 9, Issue 1, 2019, Pages 49-59]
Gazor, H. R. Comparison of the Paddy Drying Process and Milling Quality between Re-circulating and Conventional Batch Type Dryers [Volume 9, Issue 2, 2019, Pages 365-374]
Ghanbarian, D. Use of Biospeckle Imaging to Measure Mechanical Properties of Apples in the Non-invasive Manner [Volume 9, Issue 1, 2019, Pages 73-86]
Ghasemi-Nejad Raeini, M. Impact of Parboiling on some Characteristics of Rice (Champa Variety) [Volume 9, Issue 2, 2019, Pages 375-384]
Golneshan, A. A. Structural and Performance Evaluation of a Pollen-duster, Designed for Date Farms [Volume 9, Issue 2, 2019, Pages 427-438]
H
Hasantabar, S. Construction of a Seed Pod Husker and Evaluating with Soybean in Laboratory Scale [Volume 9, Issue 1, 2019, Pages 15-29]
Heidari, A. Identification and Counting of Two Important Greenhouse Pests by Image Processing, Case Study: Whitefly and Thrips [Volume 9, Issue 2, 2019, Pages 309-320]
J
Jafari, A. Development and Evaluation of an Electronic Nose System Based on MOS Sensors to Detect and to Distinguish Lemon Essential Oils [Volume 9, Issue 2, 2019, Pages 253-263]
Jafari, A. A. Appraisal of Fine Distribution in a Pilot-scale Silo in Different Filling Conditions [Volume 9, Issue 1, 2019, Pages 31-48]
Jafari Naeimi, K. Development and Field Evaluation of a Cabbage Harvester Unit [Volume 9, Issue 1, 2019, Pages 1-13]
Jahanbakhshi, A. Carrot Sorting Based on Shape using Image Processing, Artificial Neural Network, and Support Vector Machine [Volume 9, Issue 2, 2019, Pages 295-307]
Jahanian, R. Numerical Simulation of Conventional and Porch Patterns for Air Inlet Channel in Paddy Dryer [Volume 9, Issue 1, 2019, Pages 49-59]
Jannatdost, F. Kiwifruit Classification using Impact- Acoustic Technique and Artificial Neural Network [Volume 9, Issue 2, 2019, Pages 337-346]
K
Kalantari, D. Construction of a Seed Pod Husker and Evaluating with Soybean in Laboratory Scale [Volume 9, Issue 1, 2019, Pages 15-29]
Kalantari, D. Design and Evaluation of Two New Biomimetic Blades for Reducing the Shear Energy Required for Cutting Herbal Plants [Volume 9, Issue 2, 2019, Pages 265-278]
Kamali, R. Appraisal of Fine Distribution in a Pilot-scale Silo in Different Filling Conditions [Volume 9, Issue 1, 2019, Pages 31-48]
Kamfiroozi, Sh. Appraisal of Fine Distribution in a Pilot-scale Silo in Different Filling Conditions [Volume 9, Issue 1, 2019, Pages 31-48]
Kamgar, S. Structural and Performance Evaluation of a Pollen-duster, Designed for Date Farms [Volume 9, Issue 2, 2019, Pages 427-438]
Karparvarfard, S. H. Experimental Study for the Effect of Inner Spiral Grooves Performance in Horizontal Pipes of Granular Pneumatic Conveying [Volume 9, Issue 2, 2019, Pages 415-426]
Kaveh, M. Comparison of Mathematical Modeling, Artificial Neural Networks and Fuzzy Logic for Predicting the Moisture Ratio of Garlic and Shallot in a Fluidized Bed Dryer [Volume 9, Issue 1, 2019, Pages 99-112]
Keshvari, A. Prioritizing the Power Arrival in Khuzestan Province Agriculture using FAHP and FTOPSIS [Volume 9, Issue 1, 2019, Pages 235-251]
Khanali, M. Energy Consumption Analysis and Environmental Impact Assessment of Grape Production in Hazavah Region of Arak City [Volume 9, Issue 1, 2019, Pages 177-193]
Khanali, M. Study of Potential, Characteristics and Parameters of the Wind Energy Case study: Dehloran County [Volume 9, Issue 1, 2019, Pages 195-208]
Kheiralipour, K. Carrot Sorting Based on Shape using Image Processing, Artificial Neural Network, and Support Vector Machine [Volume 9, Issue 2, 2019, Pages 295-307]
Khodabakhshian, R. Prioritization and Evaluation of Mechanical Components Failure of CNC Lathe Machine based on Fuzzy FMEA Approach [Volume 9, Issue 2, 2019, Pages 399-414]
Khodaei, J. Modeling and Optimizing of the Energy Consumption of Moldboard Plow using Response Surface Methodology (RSM) [Volume 9, Issue 1, 2019, Pages 167-176]
Khodamoradi, S. Effect of Chitosan Coating on Physical, Mechanical and Chemical Properties of Grapes during Storage [Volume 9, Issue 2, 2019, Pages 347-364]
Khoobbakht, G. Analysis of the Exergy of Combustion the Diesel and Biodiesel Fuel in a DI Diesel Engine [Volume 9, Issue 1, 2019, Pages 155-166]
Khoobbakht, G. Evaluation of the Specific Fuel Costs for Combination of Diesel Fuel- Biodiesel -Bioethanol in a Diesel Engine [Volume 9, Issue 2, 2019, Pages 385-397]
Kolahan, F. Prioritization and Evaluation of Mechanical Components Failure of CNC Lathe Machine based on Fuzzy FMEA Approach [Volume 9, Issue 2, 2019, Pages 399-414]
L
Lakziyan, A. Modeling the Effective Parameters on Accuracy of Soil Electrical Conductivity Measurement Systems Using RBF Neural Network [Volume 9, Issue 1, 2019, Pages 139-154]
M
Maghsoudi, H. Determining the Best Classification Algorithm in order to Estimate the Area under Date Palm Cultivation using LANDSAT 8 Satellite Imagery [Volume 9, Issue 2, 2019, Pages 321-335]
Maharlooei, M. Determining the Best Classification Algorithm in order to Estimate the Area under Date Palm Cultivation using LANDSAT 8 Satellite Imagery [Volume 9, Issue 2, 2019, Pages 321-335]
Marzban, A. Prioritizing the Power Arrival in Khuzestan Province Agriculture using FAHP and FTOPSIS [Volume 9, Issue 1, 2019, Pages 235-251]
Marzban, A. Risk Analysis of Sugarcane Stem Transportation Operation Delays Using the FMEA-ANP Hybrid Approach [Volume 9, Issue 2, 2019, Pages 455-467]
Masoudi, A. Development and Evaluation of an Electronic Nose System Based on MOS Sensors to Detect and to Distinguish Lemon Essential Oils [Volume 9, Issue 2, 2019, Pages 253-263]
Mehrijani, M. Modeling and Optimizing of the Energy Consumption of Moldboard Plow using Response Surface Methodology (RSM) [Volume 9, Issue 1, 2019, Pages 167-176]
Memari, A. Determination of Damage Index of Olive Fruit (Koroneiky variety) in Different Harvesting Methods and Times in Golestan Province [Volume 9, Issue 1, 2019, Pages 61-72]
Mohamadi-Monavar, H. Evaluation of Vegetation Index of Greenhouse Tomato and Cucumber using non-destructive Sensors [Volume 9, Issue 1, 2019, Pages 87-98]
Mohammadigol, R. Comparison of Mathematical Modeling, Artificial Neural Networks and Fuzzy Logic for Predicting the Moisture Ratio of Garlic and Shallot in a Fluidized Bed Dryer [Volume 9, Issue 1, 2019, Pages 99-112]
Mohebbi, M. Numerical Solution of Mass Transfer Process during Drying of Apple Slices Using Pseudospectral Method [Volume 9, Issue 1, 2019, Pages 113-122]
Mohseni, P. Energy Consumption Analysis and Environmental Impact Assessment of Grape Production in Hazavah Region of Arak City [Volume 9, Issue 1, 2019, Pages 177-193]
Mohtasebi, S. S. Development and Evaluation of an Electronic Nose System Based on MOS Sensors to Detect and to Distinguish Lemon Essential Oils [Volume 9, Issue 2, 2019, Pages 253-263]
Mollazade, K. Use of Biospeckle Imaging to Measure Mechanical Properties of Apples in the Non-invasive Manner [Volume 9, Issue 1, 2019, Pages 73-86]
Monjezi, N. Modeling of the Variables that Influence Sugarcane Yield using C5.0 and QUEST Decision Tree Algorithms [Volume 9, Issue 2, 2019, Pages 469-484]
Mortezapour, H. Development and Field Evaluation of a Cabbage Harvester Unit [Volume 9, Issue 1, 2019, Pages 1-13]
Mortezapour, H. Energy and Exergy Analysis of a Greenhouse Heating System Equipped with a Parabolic Trough Concentrator and a Flat -Plate Solar Collector [Volume 9, Issue 2, 2019, Pages 439-453]
Moumeni, A. Comparison of the Paddy Drying Process and Milling Quality between Re-circulating and Conventional Batch Type Dryers [Volume 9, Issue 2, 2019, Pages 365-374]
Mousavi Seyedi, S. R. Construction of a Seed Pod Husker and Evaluating with Soybean in Laboratory Scale [Volume 9, Issue 1, 2019, Pages 15-29]
N
Nadafzadeh, M. Designing and Developing a Machine Vision System to Predict the Chlorophyll and Carotenoid Content of Plant Leaves [Volume 9, Issue 2, 2019, Pages 279-293]
Naderi-Boldaji, M. Use of Biospeckle Imaging to Measure Mechanical Properties of Apples in the Non-invasive Manner [Volume 9, Issue 1, 2019, Pages 73-86]
Nematollahi, M. A. Appraisal of Fine Distribution in a Pilot-scale Silo in Different Filling Conditions [Volume 9, Issue 1, 2019, Pages 31-48]
Nourmohamadi-Moghadami, A. Appraisal of Fine Distribution in a Pilot-scale Silo in Different Filling Conditions [Volume 9, Issue 1, 2019, Pages 31-48]
O
Omidi, A. Study of Potential, Characteristics and Parameters of the Wind Energy Case study: Dehloran County [Volume 9, Issue 1, 2019, Pages 195-208]
Omidi-Arjenaki, O. Use of Biospeckle Imaging to Measure Mechanical Properties of Apples in the Non-invasive Manner [Volume 9, Issue 1, 2019, Pages 73-86]
P
Pasban, A. Numerical Solution of Mass Transfer Process during Drying of Apple Slices Using Pseudospectral Method [Volume 9, Issue 1, 2019, Pages 113-122]
R
Rahmanian- Koushkaki, H. Experimental Study for the Effect of Inner Spiral Grooves Performance in Horizontal Pipes of Granular Pneumatic Conveying [Volume 9, Issue 2, 2019, Pages 415-426]
Rahmati, M. H. Determination of Damage Index of Olive Fruit (Koroneiky variety) in Different Harvesting Methods and Times in Golestan Province [Volume 9, Issue 1, 2019, Pages 61-72]
Rahnama, S. Determining the Best Classification Algorithm in order to Estimate the Area under Date Palm Cultivation using LANDSAT 8 Satellite Imagery [Volume 9, Issue 2, 2019, Pages 321-335]
Rasooli Sharabiani, V. Online Identification of Defect Bottles in Production Line of Soft Drink using Machine Vision [Volume 9, Issue 1, 2019, Pages 123-137]
Razzaghi, M. H. Determination of Damage Index of Olive Fruit (Koroneiky variety) in Different Harvesting Methods and Times in Golestan Province [Volume 9, Issue 1, 2019, Pages 61-72]
Rezahosseini, A. Development and Field Evaluation of a Cabbage Harvester Unit [Volume 9, Issue 1, 2019, Pages 1-13]
Rohani, A. Modeling the Effective Parameters on Accuracy of Soil Electrical Conductivity Measurement Systems Using RBF Neural Network [Volume 9, Issue 1, 2019, Pages 139-154]
Rohani, A. Fabrication and Evaluation of a Portable Biomass Stove for Implementing in Regions without Access to Natural Gas Distribution Network [Volume 9, Issue 1, 2019, Pages 209-220]
Rohani, A. Prioritization and Evaluation of Mechanical Components Failure of CNC Lathe Machine based on Fuzzy FMEA Approach [Volume 9, Issue 2, 2019, Pages 399-414]
Rostami, M. A. Determining the Best Classification Algorithm in order to Estimate the Area under Date Palm Cultivation using LANDSAT 8 Satellite Imagery [Volume 9, Issue 2, 2019, Pages 321-335]
Roustapour, O. R. Numerical Simulation of Conventional and Porch Patterns for Air Inlet Channel in Paddy Dryer [Volume 9, Issue 1, 2019, Pages 49-59]
S
Sadrnia, H. Numerical Solution of Mass Transfer Process during Drying of Apple Slices Using Pseudospectral Method [Volume 9, Issue 1, 2019, Pages 113-122]
Salehi Salmi, M. Designing and Developing a Machine Vision System to Predict the Chlorophyll and Carotenoid Content of Plant Leaves [Volume 9, Issue 2, 2019, Pages 279-293]
Sarafi, A. Energy and Exergy Analysis of a Greenhouse Heating System Equipped with a Parabolic Trough Concentrator and a Flat -Plate Solar Collector [Volume 9, Issue 2, 2019, Pages 439-453]
Sepehr, B. Evaluation of Vegetation Index of Greenhouse Tomato and Cucumber using non-destructive Sensors [Volume 9, Issue 1, 2019, Pages 87-98]
Shahidi, S. A. Numerical Solution of Mass Transfer Process during Drying of Apple Slices Using Pseudospectral Method [Volume 9, Issue 1, 2019, Pages 113-122]
Shamsabadi, H. Determination of Damage Index of Olive Fruit (Koroneiky variety) in Different Harvesting Methods and Times in Golestan Province [Volume 9, Issue 1, 2019, Pages 61-72]
Shamsi, M. Energy and Exergy Analysis of a Greenhouse Heating System Equipped with a Parabolic Trough Concentrator and a Flat -Plate Solar Collector [Volume 9, Issue 2, 2019, Pages 439-453]
Sharifian, F. Kiwifruit Classification using Impact- Acoustic Technique and Artificial Neural Network [Volume 9, Issue 2, 2019, Pages 337-346]
Sheikhdavoodi, M. J. Modeling of the Variables that Influence Sugarcane Yield using C5.0 and QUEST Decision Tree Algorithms [Volume 9, Issue 2, 2019, Pages 469-484]
T
Tabasizadeh, M. Prioritization and Evaluation of Mechanical Components Failure of CNC Lathe Machine based on Fuzzy FMEA Approach [Volume 9, Issue 2, 2019, Pages 399-414]
Taghinezhad, E. Online Identification of Defect Bottles in Production Line of Soft Drink using Machine Vision [Volume 9, Issue 1, 2019, Pages 123-137]
V
Vaysi, A. Prioritization and Evaluation of Mechanical Components Failure of CNC Lathe Machine based on Fuzzy FMEA Approach [Volume 9, Issue 2, 2019, Pages 399-414]
Z
Zaki Dizaji, H. Modeling of the Variables that Influence Sugarcane Yield using C5.0 and QUEST Decision Tree Algorithms [Volume 9, Issue 2, 2019, Pages 469-484]
Zangeneh, M. Locating Advisory and Agricultural Engineering Service Network using Set Covering Model [Volume 9, Issue 1, 2019, Pages 221-233]
Zare, D. Appraisal of Fine Distribution in a Pilot-scale Silo in Different Filling Conditions [Volume 9, Issue 1, 2019, Pages 31-48]
Zareei, S. Modeling and Optimizing of the Energy Consumption of Moldboard Plow using Response Surface Methodology (RSM) [Volume 9, Issue 1, 2019, Pages 167-176]
Ziaaddini, A. Energy and Exergy Analysis of a Greenhouse Heating System Equipped with a Parabolic Trough Concentrator and a Flat -Plate Solar Collector [Volume 9, Issue 2, 2019, Pages 439-453]
