A
-
Abbaspour Gilandeh, Y.
Comparison of Mathematical Modeling, Artificial Neural Networks and Fuzzy Logic for Predicting the Moisture Ratio of Garlic and Shallot in a Fluidized Bed Dryer [Volume 9, Issue 1, 2019, Pages 99-112]
-
Abdanan Mehdizadeh, S.
Designing and Developing a Machine Vision System to Predict the Chlorophyll and Carotenoid Content of Plant Leaves [Volume 9, Issue 2, 2019, Pages 279-293]
-
Afsharnia, F.
Risk Analysis of Sugarcane Stem Transportation Operation Delays Using the FMEA-ANP Hybrid Approach [Volume 9, Issue 2, 2019, Pages 455-467]
-
Aghkhani, M. H.
Modeling the Effective Parameters on Accuracy of Soil Electrical Conductivity Measurement Systems Using RBF Neural Network [Volume 9, Issue 1, 2019, Pages 139-154]
-
Ahmadi, E.
Effect of Chitosan Coating on Physical, Mechanical and Chemical Properties of Grapes during Storage [Volume 9, Issue 2, 2019, Pages 347-364]
-
Ahmadi Moghaddam, P.
Kiwifruit Classification using Impact- Acoustic Technique and Artificial Neural Network [Volume 9, Issue 2, 2019, Pages 337-346]
-
Akhavan, F.
Structural and Performance Evaluation of a Pollen-duster, Designed for Date Farms [Volume 9, Issue 2, 2019, Pages 427-438]
-
Akram, A.
Locating Advisory and Agricultural Engineering Service Network using Set Covering Model [Volume 9, Issue 1, 2019, Pages 221-233]
-
Alimardani, R.
Study of Potential, Characteristics and Parameters of the Wind Energy Case study: Dehloran County [Volume 9, Issue 1, 2019, Pages 195-208]
-
Amiri Chayjan, R.
Comparison of Mathematical Modeling, Artificial Neural Networks and Fuzzy Logic for Predicting the Moisture Ratio of Garlic and Shallot in a Fluidized Bed Dryer [Volume 9, Issue 1, 2019, Pages 99-112]
-
Amiri Parian, J.
Identification and Counting of Two Important Greenhouse Pests by Image Processing, Case Study: Whitefly and Thrips [Volume 9, Issue 2, 2019, Pages 309-320]
-
Azadshahraki, F.
Impact of Parboiling on some Characteristics of Rice (Champa Variety) [Volume 9, Issue 2, 2019, Pages 375-384]
B
-
Bahrami, H.
Modeling of the Variables that Influence Sugarcane Yield using C5.0 and QUEST Decision Tree Algorithms [Volume 9, Issue 2, 2019, Pages 469-484]
-
Baradaran Motie, J.
Modeling the Effective Parameters on Accuracy of Soil Electrical Conductivity Measurement Systems Using RBF Neural Network [Volume 9, Issue 1, 2019, Pages 139-154]
-
Biabi, H.
Designing and Developing a Machine Vision System to Predict the Chlorophyll and Carotenoid Content of Plant Leaves [Volume 9, Issue 2, 2019, Pages 279-293]
-
Borghaee, A. M.
Energy Consumption Analysis and Environmental Impact Assessment of Grape Production in Hazavah Region of Arak City [Volume 9, Issue 1, 2019, Pages 177-193]
-
Bougari, E.
Impact of Parboiling on some Characteristics of Rice (Champa Variety) [Volume 9, Issue 2, 2019, Pages 375-384]
D
-
Dehghan-Hesar, H.
Design and Evaluation of Two New Biomimetic Blades for Reducing the Shear Energy Required for Cutting Herbal Plants [Volume 9, Issue 2, 2019, Pages 265-278]
E
-
Ebrahimi-Nik, M. A.
Fabrication and Evaluation of a Portable Biomass Stove for Implementing in Regions without Access to Natural Gas Distribution Network [Volume 9, Issue 1, 2019, Pages 209-220]
F
-
Farhangi, O.
Online Identification of Defect Bottles in Production Line of Soft Drink using Machine Vision [Volume 9, Issue 1, 2019, Pages 123-137]
-
Fayyaz, P.
Development and Evaluation of an Electronic Nose System Based on MOS Sensors to Detect and to Distinguish Lemon Essential Oils [Volume 9, Issue 2, 2019, Pages 253-263]
G
-
Gazor, H. R.
Numerical Simulation of Conventional and Porch Patterns for Air Inlet Channel in Paddy Dryer [Volume 9, Issue 1, 2019, Pages 49-59]
-
Gazor, H. R.
Comparison of the Paddy Drying Process and Milling Quality between Re-circulating and Conventional Batch Type Dryers [Volume 9, Issue 2, 2019, Pages 365-374]
-
Ghanbarian, D.
Use of Biospeckle Imaging to Measure Mechanical Properties of Apples in the Non-invasive Manner [Volume 9, Issue 1, 2019, Pages 73-86]
-
Ghasemi-Nejad Raeini, M.
Impact of Parboiling on some Characteristics of Rice (Champa Variety) [Volume 9, Issue 2, 2019, Pages 375-384]
-
Golneshan, A. A.
Structural and Performance Evaluation of a Pollen-duster, Designed for Date Farms [Volume 9, Issue 2, 2019, Pages 427-438]
H
-
Hasantabar, S.
Construction of a Seed Pod Husker and Evaluating with Soybean in Laboratory Scale [Volume 9, Issue 1, 2019, Pages 15-29]
-
Heidari, A.
Identification and Counting of Two Important Greenhouse Pests by Image Processing, Case Study: Whitefly and Thrips [Volume 9, Issue 2, 2019, Pages 309-320]
J
-
Jafari, A.
Development and Evaluation of an Electronic Nose System Based on MOS Sensors to Detect and to Distinguish Lemon Essential Oils [Volume 9, Issue 2, 2019, Pages 253-263]
-
Jafari, A. A.
Appraisal of Fine Distribution in a Pilot-scale Silo in Different Filling Conditions [Volume 9, Issue 1, 2019, Pages 31-48]
-
Jafari Naeimi, K.
Development and Field Evaluation of a Cabbage Harvester Unit [Volume 9, Issue 1, 2019, Pages 1-13]
-
Jahanbakhshi, A.
Carrot Sorting Based on Shape using Image Processing, Artificial Neural Network, and Support Vector Machine [Volume 9, Issue 2, 2019, Pages 295-307]
-
Jahanian, R.
Numerical Simulation of Conventional and Porch Patterns for Air Inlet Channel in Paddy Dryer [Volume 9, Issue 1, 2019, Pages 49-59]
-
Jannatdost, F.
Kiwifruit Classification using Impact- Acoustic Technique and Artificial Neural Network [Volume 9, Issue 2, 2019, Pages 337-346]
K
-
Kalantari, D.
Construction of a Seed Pod Husker and Evaluating with Soybean in Laboratory Scale [Volume 9, Issue 1, 2019, Pages 15-29]
-
Kalantari, D.
Design and Evaluation of Two New Biomimetic Blades for Reducing the Shear Energy Required for Cutting Herbal Plants [Volume 9, Issue 2, 2019, Pages 265-278]
-
Kamali, R.
Appraisal of Fine Distribution in a Pilot-scale Silo in Different Filling Conditions [Volume 9, Issue 1, 2019, Pages 31-48]
-
Kamfiroozi, Sh.
Appraisal of Fine Distribution in a Pilot-scale Silo in Different Filling Conditions [Volume 9, Issue 1, 2019, Pages 31-48]
-
Kamgar, S.
Structural and Performance Evaluation of a Pollen-duster, Designed for Date Farms [Volume 9, Issue 2, 2019, Pages 427-438]
-
Karparvarfard, S. H.
Experimental Study for the Effect of Inner Spiral Grooves Performance in Horizontal Pipes of Granular Pneumatic Conveying [Volume 9, Issue 2, 2019, Pages 415-426]
-
Kaveh, M.
Comparison of Mathematical Modeling, Artificial Neural Networks and Fuzzy Logic for Predicting the Moisture Ratio of Garlic and Shallot in a Fluidized Bed Dryer [Volume 9, Issue 1, 2019, Pages 99-112]
-
Keshvari, A.
Prioritizing the Power Arrival in Khuzestan Province Agriculture using FAHP and FTOPSIS [Volume 9, Issue 1, 2019, Pages 235-251]
-
Khanali, M.
Energy Consumption Analysis and Environmental Impact Assessment of Grape Production in Hazavah Region of Arak City [Volume 9, Issue 1, 2019, Pages 177-193]
-
Khanali, M.
Study of Potential, Characteristics and Parameters of the Wind Energy Case study: Dehloran County [Volume 9, Issue 1, 2019, Pages 195-208]
-
Kheiralipour, K.
Carrot Sorting Based on Shape using Image Processing, Artificial Neural Network, and Support Vector Machine [Volume 9, Issue 2, 2019, Pages 295-307]
-
Khodabakhshian, R.
Prioritization and Evaluation of Mechanical Components Failure of CNC Lathe Machine based on Fuzzy FMEA Approach [Volume 9, Issue 2, 2019, Pages 399-414]
-
Khodaei, J.
Modeling and Optimizing of the Energy Consumption of Moldboard Plow using Response Surface Methodology (RSM) [Volume 9, Issue 1, 2019, Pages 167-176]
-
Khodamoradi, S.
Effect of Chitosan Coating on Physical, Mechanical and Chemical Properties of Grapes during Storage [Volume 9, Issue 2, 2019, Pages 347-364]
-
Khoobbakht, G.
Analysis of the Exergy of Combustion the Diesel and Biodiesel Fuel in a DI Diesel Engine [Volume 9, Issue 1, 2019, Pages 155-166]
-
Khoobbakht, G.
Evaluation of the Specific Fuel Costs for Combination of Diesel Fuel- Biodiesel -Bioethanol in a Diesel Engine [Volume 9, Issue 2, 2019, Pages 385-397]
-
Kolahan, F.
Prioritization and Evaluation of Mechanical Components Failure of CNC Lathe Machine based on Fuzzy FMEA Approach [Volume 9, Issue 2, 2019, Pages 399-414]
L
-
Lakziyan, A.
Modeling the Effective Parameters on Accuracy of Soil Electrical Conductivity Measurement Systems Using RBF Neural Network [Volume 9, Issue 1, 2019, Pages 139-154]
M
-
Maghsoudi, H.
Determining the Best Classification Algorithm in order to Estimate the Area under Date Palm Cultivation using LANDSAT 8 Satellite Imagery [Volume 9, Issue 2, 2019, Pages 321-335]
-
Maharlooei, M.
Determining the Best Classification Algorithm in order to Estimate the Area under Date Palm Cultivation using LANDSAT 8 Satellite Imagery [Volume 9, Issue 2, 2019, Pages 321-335]
-
Marzban, A.
Prioritizing the Power Arrival in Khuzestan Province Agriculture using FAHP and FTOPSIS [Volume 9, Issue 1, 2019, Pages 235-251]
-
Marzban, A.
Risk Analysis of Sugarcane Stem Transportation Operation Delays Using the FMEA-ANP Hybrid Approach [Volume 9, Issue 2, 2019, Pages 455-467]
-
Masoudi, A.
Development and Evaluation of an Electronic Nose System Based on MOS Sensors to Detect and to Distinguish Lemon Essential Oils [Volume 9, Issue 2, 2019, Pages 253-263]
-
Mehrijani, M.
Modeling and Optimizing of the Energy Consumption of Moldboard Plow using Response Surface Methodology (RSM) [Volume 9, Issue 1, 2019, Pages 167-176]
-
Memari, A.
Determination of Damage Index of Olive Fruit (Koroneiky variety) in Different Harvesting Methods and Times in Golestan Province [Volume 9, Issue 1, 2019, Pages 61-72]
-
Mohamadi-Monavar, H.
Evaluation of Vegetation Index of Greenhouse Tomato and Cucumber using non-destructive Sensors [Volume 9, Issue 1, 2019, Pages 87-98]
-
Mohammadigol, R.
Comparison of Mathematical Modeling, Artificial Neural Networks and Fuzzy Logic for Predicting the Moisture Ratio of Garlic and Shallot in a Fluidized Bed Dryer [Volume 9, Issue 1, 2019, Pages 99-112]
-
Mohebbi, M.
Numerical Solution of Mass Transfer Process during Drying of Apple Slices Using Pseudospectral Method [Volume 9, Issue 1, 2019, Pages 113-122]
-
Mohseni, P.
Energy Consumption Analysis and Environmental Impact Assessment of Grape Production in Hazavah Region of Arak City [Volume 9, Issue 1, 2019, Pages 177-193]
-
Mohtasebi, S. S.
Development and Evaluation of an Electronic Nose System Based on MOS Sensors to Detect and to Distinguish Lemon Essential Oils [Volume 9, Issue 2, 2019, Pages 253-263]
-
Mollazadeh, K.
Use of Biospeckle Imaging to Measure Mechanical Properties of Apples in the Non-invasive Manner [Volume 9, Issue 1, 2019, Pages 73-86]
-
Monjezi, N.
Modeling of the Variables that Influence Sugarcane Yield using C5.0 and QUEST Decision Tree Algorithms [Volume 9, Issue 2, 2019, Pages 469-484]
-
Mortezapour, H.
Development and Field Evaluation of a Cabbage Harvester Unit [Volume 9, Issue 1, 2019, Pages 1-13]
-
Mortezapour, H.
Energy and Exergy Analysis of a Greenhouse Heating System Equipped with a Parabolic Trough Concentrator and a Flat -Plate Solar Collector [Volume 9, Issue 2, 2019, Pages 439-453]
-
Moumeni, A.
Comparison of the Paddy Drying Process and Milling Quality between Re-circulating and Conventional Batch Type Dryers [Volume 9, Issue 2, 2019, Pages 365-374]
-
Mousavi Seyedi, S. R.
Construction of a Seed Pod Husker and Evaluating with Soybean in Laboratory Scale [Volume 9, Issue 1, 2019, Pages 15-29]
N
-
Nadafzadeh, M.
Designing and Developing a Machine Vision System to Predict the Chlorophyll and Carotenoid Content of Plant Leaves [Volume 9, Issue 2, 2019, Pages 279-293]
-
Naderi-Boldaji, M.
Use of Biospeckle Imaging to Measure Mechanical Properties of Apples in the Non-invasive Manner [Volume 9, Issue 1, 2019, Pages 73-86]
-
Nematollahi, M. A.
Appraisal of Fine Distribution in a Pilot-scale Silo in Different Filling Conditions [Volume 9, Issue 1, 2019, Pages 31-48]
-
Nourmohamadi-Moghadami, A.
Appraisal of Fine Distribution in a Pilot-scale Silo in Different Filling Conditions [Volume 9, Issue 1, 2019, Pages 31-48]
O
-
Omidi, A.
Study of Potential, Characteristics and Parameters of the Wind Energy Case study: Dehloran County [Volume 9, Issue 1, 2019, Pages 195-208]
-
Omidi-Arjenaki, O.
Use of Biospeckle Imaging to Measure Mechanical Properties of Apples in the Non-invasive Manner [Volume 9, Issue 1, 2019, Pages 73-86]
P
-
Pasban, A.
Numerical Solution of Mass Transfer Process during Drying of Apple Slices Using Pseudospectral Method [Volume 9, Issue 1, 2019, Pages 113-122]
R
-
Rahmanian- Koushkaki, H.
Experimental Study for the Effect of Inner Spiral Grooves Performance in Horizontal Pipes of Granular Pneumatic Conveying [Volume 9, Issue 2, 2019, Pages 415-426]
-
Rahmati, M. H.
Determination of Damage Index of Olive Fruit (Koroneiky variety) in Different Harvesting Methods and Times in Golestan Province [Volume 9, Issue 1, 2019, Pages 61-72]
-
Rahnama, S.
Determining the Best Classification Algorithm in order to Estimate the Area under Date Palm Cultivation using LANDSAT 8 Satellite Imagery [Volume 9, Issue 2, 2019, Pages 321-335]
-
Rasooli Sharabiani, V.
Online Identification of Defect Bottles in Production Line of Soft Drink using Machine Vision [Volume 9, Issue 1, 2019, Pages 123-137]
-
Razzaghi, M. H.
Determination of Damage Index of Olive Fruit (Koroneiky variety) in Different Harvesting Methods and Times in Golestan Province [Volume 9, Issue 1, 2019, Pages 61-72]
-
Rezahosseini, A.
Development and Field Evaluation of a Cabbage Harvester Unit [Volume 9, Issue 1, 2019, Pages 1-13]
-
Rohani, A.
Modeling the Effective Parameters on Accuracy of Soil Electrical Conductivity Measurement Systems Using RBF Neural Network [Volume 9, Issue 1, 2019, Pages 139-154]
-
Rohani, A.
Fabrication and Evaluation of a Portable Biomass Stove for Implementing in Regions without Access to Natural Gas Distribution Network [Volume 9, Issue 1, 2019, Pages 209-220]
-
Rohani, A.
Prioritization and Evaluation of Mechanical Components Failure of CNC Lathe Machine based on Fuzzy FMEA Approach [Volume 9, Issue 2, 2019, Pages 399-414]
-
Rostami, M. A.
Determining the Best Classification Algorithm in order to Estimate the Area under Date Palm Cultivation using LANDSAT 8 Satellite Imagery [Volume 9, Issue 2, 2019, Pages 321-335]
-
Roustapour, O. R.
Numerical Simulation of Conventional and Porch Patterns for Air Inlet Channel in Paddy Dryer [Volume 9, Issue 1, 2019, Pages 49-59]
S
-
Sadrnia, H.
Numerical Solution of Mass Transfer Process during Drying of Apple Slices Using Pseudospectral Method [Volume 9, Issue 1, 2019, Pages 113-122]
-
Salehi Salmi, M.
Designing and Developing a Machine Vision System to Predict the Chlorophyll and Carotenoid Content of Plant Leaves [Volume 9, Issue 2, 2019, Pages 279-293]
-
Sarafi, A.
Energy and Exergy Analysis of a Greenhouse Heating System Equipped with a Parabolic Trough Concentrator and a Flat -Plate Solar Collector [Volume 9, Issue 2, 2019, Pages 439-453]
-
Sepehr, B.
Evaluation of Vegetation Index of Greenhouse Tomato and Cucumber using non-destructive Sensors [Volume 9, Issue 1, 2019, Pages 87-98]
-
Shahidi, S. A.
Numerical Solution of Mass Transfer Process during Drying of Apple Slices Using Pseudospectral Method [Volume 9, Issue 1, 2019, Pages 113-122]
-
Shamsabadi, H.
Determination of Damage Index of Olive Fruit (Koroneiky variety) in Different Harvesting Methods and Times in Golestan Province [Volume 9, Issue 1, 2019, Pages 61-72]
-
Shamsi, M.
Energy and Exergy Analysis of a Greenhouse Heating System Equipped with a Parabolic Trough Concentrator and a Flat -Plate Solar Collector [Volume 9, Issue 2, 2019, Pages 439-453]
-
Sharifian, F.
Kiwifruit Classification using Impact- Acoustic Technique and Artificial Neural Network [Volume 9, Issue 2, 2019, Pages 337-346]
-
Sheikhdavoodi, M. J.
Modeling of the Variables that Influence Sugarcane Yield using C5.0 and QUEST Decision Tree Algorithms [Volume 9, Issue 2, 2019, Pages 469-484]
T
-
Tabasizadeh, M.
Prioritization and Evaluation of Mechanical Components Failure of CNC Lathe Machine based on Fuzzy FMEA Approach [Volume 9, Issue 2, 2019, Pages 399-414]
-
Taghinezhad, E.
Online Identification of Defect Bottles in Production Line of Soft Drink using Machine Vision [Volume 9, Issue 1, 2019, Pages 123-137]
V
-
Vaysi, A.
Prioritization and Evaluation of Mechanical Components Failure of CNC Lathe Machine based on Fuzzy FMEA Approach [Volume 9, Issue 2, 2019, Pages 399-414]
Z
-
Zaki Dizaji, H.
Modeling of the Variables that Influence Sugarcane Yield using C5.0 and QUEST Decision Tree Algorithms [Volume 9, Issue 2, 2019, Pages 469-484]
-
Zangeneh, M.
Locating Advisory and Agricultural Engineering Service Network using Set Covering Model [Volume 9, Issue 1, 2019, Pages 221-233]
-
Zare, D.
Appraisal of Fine Distribution in a Pilot-scale Silo in Different Filling Conditions [Volume 9, Issue 1, 2019, Pages 31-48]
-
Zareei, S.
Modeling and Optimizing of the Energy Consumption of Moldboard Plow using Response Surface Methodology (RSM) [Volume 9, Issue 1, 2019, Pages 167-176]
-
Ziaaddini, A.
Energy and Exergy Analysis of a Greenhouse Heating System Equipped with a Parabolic Trough Concentrator and a Flat -Plate Solar Collector [Volume 9, Issue 2, 2019, Pages 439-453]