A
-
Abbasgholipour, M.
Experimental Evaluation of Heat Transfer of MF 285 Tractor Radiator, using Nano-fluid AL2O3+Water [Volume 12, Issue 3, 2022, Pages 281-299]
-
Abdi, R.
Optimization of Biogas Production Efficiency from Anaerobic Digestion of Organic Fraction of Municipal Solid Waste under Thermal Pretreatment at Different Concentrations [Volume 12, Issue 3, 2022, Pages 409-421]
-
Abdollahpour, Sh.
Development and Optimization a Threshing Unit for Sunflower Grain with Response Surface Methodology (RSM) [Volume 12, Issue 2, 2022, Pages 169-179]
-
Abdollahpour, Sh.
Optimization of Biogas Production Efficiency from Anaerobic Digestion of Organic Fraction of Municipal Solid Waste under Thermal Pretreatment at Different Concentrations [Volume 12, Issue 3, 2022, Pages 409-421]
-
Aghaei Badelbou, E.
Investigating the Effect of Output Flow Regulator Plate on the Performance of Flour Cyclone: Experimental Studies and Numerical Simulations [Volume 12, Issue 3, 2022, Pages 331-349]
-
Aghkhani, M. H.
Spectral Feature Selection from the Hyperspectral Dataset to Identify Pistachio Leaves Infected by Psylla [Volume 12, Issue 2, 2022, Pages 159-167]
-
Ahmadi, E.
Evaluation of Mechanical and Chemical Parameters of Okra with Chitosan Coating in Nano Packaging Films and Atmospheric Modified Conditions [Volume 12, Issue 4, 2022, Pages 600-612]
-
Ahmadi, I.
Development and Evaluation of a Semi-automatic Cucumber Seed Extractor [Volume 12, Issue 4, 2022, Pages 453-466]
-
Ahmadi Moghaddam, P.
Exergy Analysis of the Steam Generation System to Explore the Potential for Optimizing Energy Consumption [Volume 12, Issue 2, 2022, Pages 119-130]
-
Ahmadi Moghaddam, P.
Experimental and Numerical Study of the Moisture Loss Rate in Conditioned Alfalfa Stem using Computational Fluid Dynamics [Volume 12, Issue 3, 2022, Pages 301-317]
-
Alboativi, E.
Potential Assessment of Energy Providing for Bagasse-Based Chipboard Industry Using Sugarcane Waste (A case study: Debal Khozaie Agro-Industry) [Volume 12, Issue 2, 2022, Pages 193-206]
-
Amini, Gh.
Effect of Infrared Drying on Drying Kinetics and Color Changes of Wild Sage Seed Mucilage [Volume 12, Issue 1, 2022, Pages 67-79]
-
Amiri, H.
Economic Analysis and Evaluation of Grain Losses of Two Common Straw Collecting Combine Harvester: A Case Study, Azna County, Lorestan, Iran [Volume 12, Issue 4, 2022, Pages 613-626]
-
Asakereh, A.
Potential Assessment of Energy Providing for Bagasse-Based Chipboard Industry Using Sugarcane Waste (A case study: Debal Khozaie Agro-Industry) [Volume 12, Issue 2, 2022, Pages 193-206]
-
Asakereh, A.
Economic Analysis and Evaluation of Grain Losses of Two Common Straw Collecting Combine Harvester: A Case Study, Azna County, Lorestan, Iran [Volume 12, Issue 4, 2022, Pages 613-626]
-
Asoodar, M. A.
Workplace and Gravity: Two Mechanized Cow Milking Systems Compared for Human Physiological Strains [Volume 12, Issue 1, 2022, Pages 21-32]
-
Azadshahraki, F.
Diagnosis of Early Blight Disease in Tomato Plant based on Visible/Near-Infrared Spectroscopy and Principal Components Analysis- Artificial Neural Network Prior to Visual Disease Symptoms [Volume 12, Issue 1, 2022, Pages 81-94]
-
Azizpour, Z.
Identification of Idiocerus stali (Hem.: Cicadellidae) Using Image Processing and Artificial Neural Networks [Volume 12, Issue 2, 2022, Pages 107-118]
B
-
Bagheri, I.
Monitoring Rice Land Changes Using GIS and RS [Volume 12, Issue 4, 2022, Pages 515-527]
-
Bagherpour, H.
Investigation on the Capability of GreenSeeker Sensor in Predicting Nitrogen Status and Fractional Vegetation Cover of Spinach Crop [Volume 12, Issue 1, 2022, Pages 95-106]
-
Bahrami, H.
Investigation of the Co-digestion of Chicken Manure with Chicken Intestine and Its Contents and Rumen Contents [Volume 12, Issue 2, 2022, Pages 147-157]
-
Bahrami, H.
Investigating the Effect of Increasing Nano Cellulose to Diesel Fuel on Emission and Performance of Internal Combustion Engine [Volume 12, Issue 4, 2022, Pages 575-585]
-
Bahrami, H.
Effect of Gaseous Fuels and Coolant Temperature on Performance and Combustion Characteristics of a Low-Speed Single Cylinder Diesel Engine [Volume 12, Issue 3, 2022, Pages 351-366]
-
Banaeian, N.
Analysis and Evaluation of Energy, Economic, and Environmental Impact Indicators of Horticultural and Greenhouse Production Systems in Iran using PRISMA Method [Volume 12, Issue 3, 2022, Pages 423-451]
-
Borghaee, A. M.
Design and Construction of a Cabinet Dryer for Food Waste and Evaluation of its Kinetics and Energy Consumption [Volume 12, Issue 4, 2022, Pages 467-480]
C
-
Chavoshgoli, E.
Development and Optimization a Threshing Unit for Sunflower Grain with Response Surface Methodology (RSM) [Volume 12, Issue 2, 2022, Pages 169-179]
D
-
Dana, M.
Experimental and Numerical Study of the Moisture Loss Rate in Conditioned Alfalfa Stem using Computational Fluid Dynamics [Volume 12, Issue 3, 2022, Pages 301-317]
-
Dashti, F.
Evaluation of Mechanical and Chemical Parameters of Okra with Chitosan Coating in Nano Packaging Films and Atmospheric Modified Conditions [Volume 12, Issue 4, 2022, Pages 600-612]
E
-
Ebrahimi, S.
Optimization of Biogas Production Efficiency from Anaerobic Digestion of Organic Fraction of Municipal Solid Waste under Thermal Pretreatment at Different Concentrations [Volume 12, Issue 3, 2022, Pages 409-421]
-
Eghtedari, A. R.
Development and Evaluation of a Semi-automatic Cucumber Seed Extractor [Volume 12, Issue 4, 2022, Pages 453-466]
-
Eshaghi Pireh, M.
Analysis of Energy of Diesel Engine using Diesel and Biodiesel Fuel Mixtures Containing Graphene Oxide Nanoparticles [Volume 12, Issue 3, 2022, Pages 319-329]
-
Esmaeilzadeh Kenari, R.
Fabrication and Evaluation of Cellulose Containers from Rice Straw with Natural Coatings [Volume 12, Issue 3, 2022, Pages 253-264]
F
-
Farhadi, R.
Energy Flow Simulation of the Uneven Span Glass Greenhouse with Special Structure using Computational Fluid Dynamics (CFD) [Volume 12, Issue 4, 2022, Pages 497-513]
-
Farzanpour, H.
Developing the Computational Simulator to Control the Ventilation Condition of Poultry House and Optimize the Production [Volume 12, Issue 2, 2022, Pages 131-146]
-
Fereydoni, M.
Microscopic Investigation of Cold Plasma Effect on Chickpea Seed Germination [Volume 12, Issue 2, 2022, Pages 231-240]
G
-
Ghadami Firouzabadi, A.
Effect of Different Tillage Systems and Deficit Irrigation on Yield and Water Use Efficiency of Sugar Beet [Volume 12, Issue 2, 2022, Pages 219-229]
-
Ghasemzadeh, H. R.
Development and Optimization a Threshing Unit for Sunflower Grain with Response Surface Methodology (RSM) [Volume 12, Issue 2, 2022, Pages 169-179]
-
Gholami Par-Shokohi, M.
Analysis of Energy of Diesel Engine using Diesel and Biodiesel Fuel Mixtures Containing Graphene Oxide Nanoparticles [Volume 12, Issue 3, 2022, Pages 319-329]
-
Golabadi, M.
Development and Evaluation of a Semi-automatic Cucumber Seed Extractor [Volume 12, Issue 4, 2022, Pages 453-466]
-
Golpira, H.
Vibration Mode for Effective Mechanical Harvesting of Shengy Olive [Volume 12, Issue 1, 2022, Pages 33-41]
-
Golpira, H.
Evaluation of a Chickpea Harvesting Header with Perforated Plate [Volume 12, Issue 4, 2022, Pages 481-495]
-
Golpour, I.
Exergy Analysis of the Steam Generation System to Explore the Potential for Optimizing Energy Consumption [Volume 12, Issue 2, 2022, Pages 119-130]
H
-
Haji Agha Alizaheh, H.
Microscopic Investigation of Cold Plasma Effect on Chickpea Seed Germination [Volume 12, Issue 2, 2022, Pages 231-240]
-
Hamzei, J.
Investigation on the Capability of GreenSeeker Sensor in Predicting Nitrogen Status and Fractional Vegetation Cover of Spinach Crop [Volume 12, Issue 1, 2022, Pages 95-106]
-
Hasannia Samakoush, M.
Design, Construction and Evaluation of a Measuring Device for Rice Picker Combine Losses Based on Piezoelectric Sensor at Lab Scale [Volume 12, Issue 2, 2022, Pages 181-192]
-
Hasanpour, A.
Investigation of the Motive Steam Pressure Effect on Performance and Reverse Flows in Sugar Factory Thermo-compressor: Validation and Numerical Study [Volume 12, Issue 3, 2022, Pages 379-397]
-
Hashemi, S. J.
Fabrication and Evaluation of Cellulose Containers from Rice Straw with Natural Coatings [Volume 12, Issue 3, 2022, Pages 253-264]
-
Hashemi Jozani, M.
Investigation on the Capability of GreenSeeker Sensor in Predicting Nitrogen Status and Fractional Vegetation Cover of Spinach Crop [Volume 12, Issue 1, 2022, Pages 95-106]
-
Hayati, A.
Workplace and Gravity: Two Mechanized Cow Milking Systems Compared for Human Physiological Strains [Volume 12, Issue 1, 2022, Pages 21-32]
-
Heidari, A.
Effect of Different Tillage Systems and Deficit Irrigation on Yield and Water Use Efficiency of Sugar Beet [Volume 12, Issue 2, 2022, Pages 219-229]
-
Heidari, A.
Economic Evaluation of using Different Tillage Methods and Crop Rotation in Rain-Fed Wheat Cultivation [Volume 12, Issue 3, 2022, Pages 367-377]
-
Heydarian, A.
Evaluation of Mechanical and Chemical Parameters of Okra with Chitosan Coating in Nano Packaging Films and Atmospheric Modified Conditions [Volume 12, Issue 4, 2022, Pages 600-612]
-
Houshyar, E.
Effect of Gaseous Fuels and Coolant Temperature on Performance and Combustion Characteristics of a Low-Speed Single Cylinder Diesel Engine [Volume 12, Issue 3, 2022, Pages 351-366]
I
-
Imani, D. M.
A Data-driven Model for Predicting the Yield of Recoverable Sugar from Sugarcane [Volume 12, Issue 4, 2022, Pages 543-558]
J
-
Jamshidi, B.
Diagnosis of Early Blight Disease in Tomato Plant based on Visible/Near-Infrared Spectroscopy and Principal Components Analysis- Artificial Neural Network Prior to Visual Disease Symptoms [Volume 12, Issue 1, 2022, Pages 81-94]
K
-
Kamali, M.
Optimization of Biogas Production Efficiency from Anaerobic Digestion of Organic Fraction of Municipal Solid Waste under Thermal Pretreatment at Different Concentrations [Volume 12, Issue 3, 2022, Pages 409-421]
-
Karimzadeh, R.
Diagnosis of Early Blight Disease in Tomato Plant based on Visible/Near-Infrared Spectroscopy and Principal Components Analysis- Artificial Neural Network Prior to Visual Disease Symptoms [Volume 12, Issue 1, 2022, Pages 81-94]
-
Karparvarfard, S. H.
Comparison of Fiber Reinforced Polymer (FRP) Composite Blade with Steel Blade Performance Used in Chisel Plow [Volume 12, Issue 1, 2022, Pages 1-19]
-
Keyhani, A. R.
Energy and Exergy Analysis of Sour Cherry Evaporation Line [Volume 12, Issue 2, 2022, Pages 207-218]
-
Khalo ahmadi, A.
Design and Construction of a Cabinet Dryer for Food Waste and Evaluation of its Kinetics and Energy Consumption [Volume 12, Issue 4, 2022, Pages 467-480]
-
Khodabakhshian, R.
Evaluation of the Plateau Honing on the Friction and Wear Cylinder Liners in Agricultural Tractors [Volume 12, Issue 1, 2022, Pages 55-66]
-
Khorasani, M. E.
Development of an Electronic System for Determining Vertical Loads on the Rear Axle of Cereal Combine Harvesters in Motion [Volume 12, Issue 2, 2022, Pages 241-252]
-
Khorasani, M. E.
Investigating the Effect of Increasing Nano Cellulose to Diesel Fuel on Emission and Performance of Internal Combustion Engine [Volume 12, Issue 4, 2022, Pages 575-585]
-
Khoshdel, M.
Fabrication and Evaluation of Cellulose Containers from Rice Straw with Natural Coatings [Volume 12, Issue 3, 2022, Pages 253-264]
L
-
Loghavi, M.
Vibration Mode for Effective Mechanical Harvesting of Shengy Olive [Volume 12, Issue 1, 2022, Pages 33-41]
-
Lorestani, A. N.
Identification of Idiocerus stali (Hem.: Cicadellidae) Using Image Processing and Artificial Neural Networks [Volume 12, Issue 2, 2022, Pages 107-118]
M
-
Mahboub Yangeje, H.
Investigating the Interaction between Soil and Cultivator Blade by Numerical Simulation and Validation of Results by Soil Bin Tests [Volume 12, Issue 4, 2022, Pages 587-599]
-
Mahdavian, A.
Design, Construction and Evaluation of a Measuring Device for Rice Picker Combine Losses Based on Piezoelectric Sensor at Lab Scale [Volume 12, Issue 2, 2022, Pages 181-192]
-
Mansoori, Y.
Potential Assessment of Energy Providing for Bagasse-Based Chipboard Industry Using Sugarcane Waste (A case study: Debal Khozaie Agro-Industry) [Volume 12, Issue 2, 2022, Pages 193-206]
-
Mardani, A.
Investigating the Interaction between Soil and Cultivator Blade by Numerical Simulation and Validation of Results by Soil Bin Tests [Volume 12, Issue 4, 2022, Pages 587-599]
-
Marzban, A.
Workplace and Gravity: Two Mechanized Cow Milking Systems Compared for Human Physiological Strains [Volume 12, Issue 1, 2022, Pages 21-32]
-
Masoudi, H.
Development of an Electronic System for Determining Vertical Loads on the Rear Axle of Cereal Combine Harvesters in Motion [Volume 12, Issue 2, 2022, Pages 241-252]
-
Mesri, A.
Monitoring Rice Land Changes Using GIS and RS [Volume 12, Issue 4, 2022, Pages 515-527]
-
Miri, S. M. R.
Numerical Simulation of the Performance and Emission of a Diesel Engine with Diesel-biodiesel Mixture [Volume 12, Issue 4, 2022, Pages 559-574]
-
Mirzaee, A.
Investigation of the Co-digestion of Chicken Manure with Chicken Intestine and Its Contents and Rumen Contents [Volume 12, Issue 2, 2022, Pages 147-157]
-
Mobli, H.
Energy and Exergy Analysis of Sour Cherry Evaporation Line [Volume 12, Issue 2, 2022, Pages 207-218]
-
Moghimi, A.
Spectral Feature Selection from the Hyperspectral Dataset to Identify Pistachio Leaves Infected by Psylla [Volume 12, Issue 2, 2022, Pages 159-167]
-
Mohamadi-Monavar, H.
Distinguishing Rain-fed and Irrigated Crops in Hamadan Province Using Spectral Indices of Satellite Images [Volume 12, Issue 4, 2022, Pages 529-542]
-
Mohammadi Alasti, B.
Experimental Evaluation of Heat Transfer of MF 285 Tractor Radiator, using Nano-fluid AL2O3+Water [Volume 12, Issue 3, 2022, Pages 281-299]
-
Mohammad Zamani, D.
Analysis of Energy of Diesel Engine using Diesel and Biodiesel Fuel Mixtures Containing Graphene Oxide Nanoparticles [Volume 12, Issue 3, 2022, Pages 319-329]
-
Monjezi, N.
Evaluating the Efficiency of Sugarcane Harvesting Units Using a Combined Approach to Data Envelopment Analysis and Data Mining [Volume 12, Issue 1, 2022, Pages 43-54]
-
Monjezi, N.
Evaluation of Different Methods of Sugarcane Hilling Up in Two Soil Textures and Three Forward Speeds [Volume 12, Issue 3, 2022, Pages 265-280]
-
Motazedian, F.
Energy Flow Simulation of the Uneven Span Glass Greenhouse with Special Structure using Computational Fluid Dynamics (CFD) [Volume 12, Issue 4, 2022, Pages 497-513]
-
Mousavi Seyedi, S. R.
Design, Construction and Evaluation of a Measuring Device for Rice Picker Combine Losses Based on Piezoelectric Sensor at Lab Scale [Volume 12, Issue 2, 2022, Pages 181-192]
-
Mousavi Seyedi, S. R.
Numerical Simulation of the Performance and Emission of a Diesel Engine with Diesel-biodiesel Mixture [Volume 12, Issue 4, 2022, Pages 559-574]
-
Musevi Niya, M. J.
Measurement and Analysis of Fruit Vibration on the Truck Bed during Transportation on Highways [Volume 12, Issue 3, 2022, Pages 399-408]
N
-
Naderi, H.
Diagnosis of Early Blight Disease in Tomato Plant based on Visible/Near-Infrared Spectroscopy and Principal Components Analysis- Artificial Neural Network Prior to Visual Disease Symptoms [Volume 12, Issue 1, 2022, Pages 81-94]
-
Nadernejad, F.
A Data-driven Model for Predicting the Yield of Recoverable Sugar from Sugarcane [Volume 12, Issue 4, 2022, Pages 543-558]
-
Nalbandi, H.
Developing the Computational Simulator to Control the Ventilation Condition of Poultry House and Optimize the Production [Volume 12, Issue 2, 2022, Pages 131-146]
-
Navid, H.
Measurement and Analysis of Fruit Vibration on the Truck Bed during Transportation on Highways [Volume 12, Issue 3, 2022, Pages 399-408]
-
Nematollahi, M. A.
Comparison of Fiber Reinforced Polymer (FRP) Composite Blade with Steel Blade Performance Used in Chisel Plow [Volume 12, Issue 1, 2022, Pages 1-19]
-
Niazi, A.
Evaluation of a Chickpea Harvesting Header with Perforated Plate [Volume 12, Issue 4, 2022, Pages 481-495]
-
Nikbakht, A. M.
Energy and Exergy Analysis of Sour Cherry Evaporation Line [Volume 12, Issue 2, 2022, Pages 207-218]
-
Nikbakht, A. M.
Exergy Analysis of the Steam Generation System to Explore the Potential for Optimizing Energy Consumption [Volume 12, Issue 2, 2022, Pages 119-130]
-
Nikbakht, A. M.
Investigating the Effect of Output Flow Regulator Plate on the Performance of Flour Cyclone: Experimental Studies and Numerical Simulations [Volume 12, Issue 3, 2022, Pages 331-349]
-
Nikbakht, A. M.
Investigation of the Motive Steam Pressure Effect on Performance and Reverse Flows in Sugar Factory Thermo-compressor: Validation and Numerical Study [Volume 12, Issue 3, 2022, Pages 379-397]
-
Normohammadi, A.
Evaluation of Mechanical and Chemical Parameters of Okra with Chitosan Coating in Nano Packaging Films and Atmospheric Modified Conditions [Volume 12, Issue 4, 2022, Pages 600-612]
-
Norouzi Masir, M.
Investigation of the Co-digestion of Chicken Manure with Chicken Intestine and Its Contents and Rumen Contents [Volume 12, Issue 2, 2022, Pages 147-157]
P
-
Piri, A.
Energy and Exergy Analysis of Sour Cherry Evaporation Line [Volume 12, Issue 2, 2022, Pages 207-218]
R
-
Rahimi-Ajdadi, F.
Monitoring Rice Land Changes Using GIS and RS [Volume 12, Issue 4, 2022, Pages 515-527]
-
Rahmatian, M.
Comparison of Fiber Reinforced Polymer (FRP) Composite Blade with Steel Blade Performance Used in Chisel Plow [Volume 12, Issue 1, 2022, Pages 1-19]
-
Rahmati-Joneidabad, M.
Energy Flow Simulation of the Uneven Span Glass Greenhouse with Special Structure using Computational Fluid Dynamics (CFD) [Volume 12, Issue 4, 2022, Pages 497-513]
-
Rahmati nejad, B.
Experimental Evaluation of Heat Transfer of MF 285 Tractor Radiator, using Nano-fluid AL2O3+Water [Volume 12, Issue 3, 2022, Pages 281-299]
-
Ramezani Boukat, A.
Measurement and Analysis of Fruit Vibration on the Truck Bed during Transportation on Highways [Volume 12, Issue 3, 2022, Pages 399-408]
-
Ranjbar, S.
Measurement and Analysis of Fruit Vibration on the Truck Bed during Transportation on Highways [Volume 12, Issue 3, 2022, Pages 399-408]
-
Rasouli, M.
Effect of Infrared Drying on Drying Kinetics and Color Changes of Wild Sage Seed Mucilage [Volume 12, Issue 1, 2022, Pages 67-79]
-
Rasouli, M. R.
A Data-driven Model for Predicting the Yield of Recoverable Sugar from Sugarcane [Volume 12, Issue 4, 2022, Pages 543-558]
-
Rezaei, A.
Development of an Electronic System for Determining Vertical Loads on the Rear Axle of Cereal Combine Harvesters in Motion [Volume 12, Issue 2, 2022, Pages 241-252]
-
Rezvanivand fanaei, A.
Investigating the Effect of Output Flow Regulator Plate on the Performance of Flour Cyclone: Experimental Studies and Numerical Simulations [Volume 12, Issue 3, 2022, Pages 331-349]
-
Rezvanivand fanaei, A.
Investigation of the Motive Steam Pressure Effect on Performance and Reverse Flows in Sugar Factory Thermo-compressor: Validation and Numerical Study [Volume 12, Issue 3, 2022, Pages 379-397]
-
Rohani, A.
Optimization of Biogas Production Efficiency from Anaerobic Digestion of Organic Fraction of Municipal Solid Waste under Thermal Pretreatment at Different Concentrations [Volume 12, Issue 3, 2022, Pages 409-421]
-
Rostampour, V.
Investigating the Effect of Output Flow Regulator Plate on the Performance of Flour Cyclone: Experimental Studies and Numerical Simulations [Volume 12, Issue 3, 2022, Pages 331-349]
-
Roustapour, O. R.
Design and Construction of a Cabinet Dryer for Food Waste and Evaluation of its Kinetics and Energy Consumption [Volume 12, Issue 4, 2022, Pages 467-480]
S
-
Sabahi, B.
Effect of Gaseous Fuels and Coolant Temperature on Performance and Combustion Characteristics of a Low-Speed Single Cylinder Diesel Engine [Volume 12, Issue 3, 2022, Pages 351-366]
-
Safieddin Ardebili, S. M.
Investigating the Effect of Increasing Nano Cellulose to Diesel Fuel on Emission and Performance of Internal Combustion Engine [Volume 12, Issue 4, 2022, Pages 575-585]
-
Safieddin Ardebili, S. M.
Effect of Gaseous Fuels and Coolant Temperature on Performance and Combustion Characteristics of a Low-Speed Single Cylinder Diesel Engine [Volume 12, Issue 3, 2022, Pages 351-366]
-
Sajadi, S.
Evaluation of the Plateau Honing on the Friction and Wear Cylinder Liners in Agricultural Tractors [Volume 12, Issue 1, 2022, Pages 55-66]
-
Salehi, F.
Effect of Infrared Drying on Drying Kinetics and Color Changes of Wild Sage Seed Mucilage [Volume 12, Issue 1, 2022, Pages 67-79]
-
Samimi Akhijahani, H.
Evaluation of a Chickpea Harvesting Header with Perforated Plate [Volume 12, Issue 4, 2022, Pages 481-495]
-
Sazgarnia, A.
Spectral Feature Selection from the Hyperspectral Dataset to Identify Pistachio Leaves Infected by Psylla [Volume 12, Issue 2, 2022, Pages 159-167]
-
Sedaghat Herfeh, N.
Energy and Exergy Analysis of Sour Cherry Evaporation Line [Volume 12, Issue 2, 2022, Pages 207-218]
-
Seiiedlou Heris, S. S.
Developing the Computational Simulator to Control the Ventilation Condition of Poultry House and Optimize the Production [Volume 12, Issue 2, 2022, Pages 131-146]
-
Seyedan, S. M.
Economic Evaluation of using Different Tillage Methods and Crop Rotation in Rain-Fed Wheat Cultivation [Volume 12, Issue 3, 2022, Pages 367-377]
-
Sharifi, K.
Diagnosis of Early Blight Disease in Tomato Plant based on Visible/Near-Infrared Spectroscopy and Principal Components Analysis- Artificial Neural Network Prior to Visual Disease Symptoms [Volume 12, Issue 1, 2022, Pages 81-94]
-
Sharifi Malvajerdi, A.
Comparison of Fiber Reinforced Polymer (FRP) Composite Blade with Steel Blade Performance Used in Chisel Plow [Volume 12, Issue 1, 2022, Pages 1-19]
-
Sheikhdavoodi, M. J.
Effect of Gaseous Fuels and Coolant Temperature on Performance and Combustion Characteristics of a Low-Speed Single Cylinder Diesel Engine [Volume 12, Issue 3, 2022, Pages 351-366]
-
Soleymani, M.
Investigation of the Co-digestion of Chicken Manure with Chicken Intestine and Its Contents and Rumen Contents [Volume 12, Issue 2, 2022, Pages 147-157]
-
Soleymani, M.
Evaluation of Different Methods of Sugarcane Hilling Up in Two Soil Textures and Three Forward Speeds [Volume 12, Issue 3, 2022, Pages 265-280]
-
Soleymani, M.
Economic Analysis and Evaluation of Grain Losses of Two Common Straw Collecting Combine Harvester: A Case Study, Azna County, Lorestan, Iran [Volume 12, Issue 4, 2022, Pages 613-626]
T
-
Taki, M.
Energy Flow Simulation of the Uneven Span Glass Greenhouse with Special Structure using Computational Fluid Dynamics (CFD) [Volume 12, Issue 4, 2022, Pages 497-513]
V
-
Vahedi, H.
Identification of Idiocerus stali (Hem.: Cicadellidae) Using Image Processing and Artificial Neural Networks [Volume 12, Issue 2, 2022, Pages 107-118]
W
-
Waismoradi, A.
Investigating the Effect of Increasing Nano Cellulose to Diesel Fuel on Emission and Performance of Internal Combustion Engine [Volume 12, Issue 4, 2022, Pages 575-585]
Z
-
Zabihzadeh, S. M.
Fabrication and Evaluation of Cellulose Containers from Rice Straw with Natural Coatings [Volume 12, Issue 3, 2022, Pages 253-264]
-
Zaki Dizaji, H.
Potential Assessment of Energy Providing for Bagasse-Based Chipboard Industry Using Sugarcane Waste (A case study: Debal Khozaie Agro-Industry) [Volume 12, Issue 2, 2022, Pages 193-206]
-
Zaki Dizaji, H.
Development of an Electronic System for Determining Vertical Loads on the Rear Axle of Cereal Combine Harvesters in Motion [Volume 12, Issue 2, 2022, Pages 241-252]
-
Zaki Dizaji, H.
Investigating the Effect of Increasing Nano Cellulose to Diesel Fuel on Emission and Performance of Internal Combustion Engine [Volume 12, Issue 4, 2022, Pages 575-585]
-
Zangeneh, M.
Analysis and Evaluation of Energy, Economic, and Environmental Impact Indicators of Horticultural and Greenhouse Production Systems in Iran using PRISMA Method [Volume 12, Issue 3, 2022, Pages 423-451]
-
Zibazadeh, S.
Distinguishing Rain-fed and Irrigated Crops in Hamadan Province Using Spectral Indices of Satellite Images [Volume 12, Issue 4, 2022, Pages 529-542]