A
-
Abdanan Mehdizadeh, S.
Modeling and Fabrication of a Robot for Sowing in a Seedling Tray (Case Study: Sugar Beet) [Volume 13, Issue 3, 2023, Pages 249-266]
-
Abdanan Mehdizadeh, S.
Automatic Detection of Plant Cultivation Rows Robot using Machine Vision (Case Study: Basil Plant) [Volume 13, Issue 4, 2023, Pages 453-475]
-
Abdi, J.
Assessment of Sieve Slope, Sieve Range and Fan Suction on Cleaning Efficiency and Loss Rate of Peanut Thresher [Volume 13, Issue 3, 2023, Pages 349-363]
-
Aghili Nategh, N.
Detection of Different Percentages of Palm in Corn Oil with the Help of an Electric Nose [Volume 13, Issue 2, 2023, Pages 163-174]
-
Aghkhani, M. H.
Analysis of Workspace and Kinematics of Robot Manipulator for Product Handling in Agricultural Farm [Volume 13, Issue 2, 2023, Pages 101-115]
-
Akbari, A. A.
Analysis of Workspace and Kinematics of Robot Manipulator for Product Handling in Agricultural Farm [Volume 13, Issue 2, 2023, Pages 101-115]
-
Alimardani, R.
Thermal and Mechanical Analysis of Rotary Kiln of Activated Carbon Producing Reactor [Volume 13, Issue 2, 2023, Pages 135-146]
B
-
Badr, A.
Mathematical Analysis for Prediction Performance Rate of Wheel Type Trenching Machine [Volume 13, Issue 1, 2023, Pages 1-13]
-
Baghbani, R.
Investigation of the Cylinder Liner Wear in Agricultural Tractors [Volume 13, Issue 1, 2023, Pages 15-25]
-
Bahrami, H.
A Multi-Objective Optimization to Determine The Optimal Patterns of Sustainable Agricultural Mechanization Using NSGA-II Algorithm [Volume 13, Issue 4, 2023, Pages 477-491]
-
Banakar, A.
Technical and Economic Feasibility of Using Solar Energy to Provide Heat Load to a Poultry House [Volume 13, Issue 3, 2023, Pages 285-307]
-
Banakar, A.
Automatic Detection of Plant Cultivation Rows Robot using Machine Vision (Case Study: Basil Plant) [Volume 13, Issue 4, 2023, Pages 453-475]
-
Bayati, M. R.
Experimental Study and Mathematical Modeling of Hydrogen Sulfide Removal from Biogas [Volume 13, Issue 4, 2023, Pages 521-533]
-
Besharati, B.
Design and Construction of a High-voltage System to Kill Weeds with a Feedback Mechanism [Volume 13, Issue 2, 2023, Pages 117-133]
-
Besharati, Sh.
Thermal Analysis and Exergy of Linear Fresnel Reflectors for Feasibility of Use in Greenhouse Heating System [Volume 13, Issue 2, 2023, Pages 147-162]
E
-
Ebrahimi-Nik, M. A.
Experimental Study and Mathematical Modeling of Hydrogen Sulfide Removal from Biogas [Volume 13, Issue 4, 2023, Pages 521-533]
-
Ebrahim Khanloo Sisi, V.
Measurement of Losses in a Austoft Sugarcane Harvester Case 7000 [Volume 13, Issue 3, 2023, Pages 335-348]
-
Edalat, M.
Fusion of Multispectral and Radar Images to Enhance Classification Accuracy and Estimate the Area under Various Crops Cultivation [Volume 13, Issue 4, 2023, Pages 493-508]
F
-
Falahat Nejad Mahani, Sh.
Maize Tassel Detection and Counting Using Deep Learning Techniques [Volume 13, Issue 2, 2023, Pages 175-194]
-
Fallah, M.
Detection of Chilo Suppressalis using Smartphone Images and Deep Learning [Volume 13, Issue 2, 2023, Pages 195-211]
-
Farrokhi Teimourlou, R.
Feasibility of Soil Texture Determination Using Acoustic Signal Processing of a Cone Penetrometer [Volume 13, Issue 4, 2023, Pages 509-520]
-
Farzaneh, B.
Technical and Economic Feasibility of Using Solar Energy to Provide Heat Load to a Poultry House [Volume 13, Issue 3, 2023, Pages 285-307]
-
Fathi, R.
Evaluation and Optimization of Energy and Environmental Indicators Using Life Cycle Assessment and Data Envelopment Analysis
(Case Study: Industrial Cattle Farms in Northern Khuzestan) [Volume 13, Issue 4, 2023, Pages 383-404]
G
-
Ghamari, B.
Predicting Whole-body Vibration-based on Linear Regression Models and Determining Permissible Exposure Time of Tractor Operator [Volume 13, Issue 2, 2023, Pages 227-237]
-
Ghanbari Parmehr, E.
Detection of Chilo Suppressalis using Smartphone Images and Deep Learning [Volume 13, Issue 2, 2023, Pages 195-211]
-
Ghasemi, K.
Evaluation of the Effects of Artificial Light on Some Plant Characteristics in the Design and Construction of a Small-scale Plant Factory [Volume 13, Issue 2, 2023, Pages 213-226]
-
Ghasemi-Nejad Raeini, M.
Evaluation and Optimization of Energy and Environmental Indicators Using Life Cycle Assessment and Data Envelopment Analysis
(Case Study: Industrial Cattle Farms in Northern Khuzestan) [Volume 13, Issue 4, 2023, Pages 383-404]
-
Ghiasi, P.
Design of a Harvester for Harvesting of the Leaves and Stems of Plants in Cultivation Rows and Evaluation its Performance in the Peppermint Farm [Volume 13, Issue 3, 2023, Pages 267-284]
-
Gholami Par-Shokohi, M.
Experimental Investigation of Performance and Emissions of a Compression Ignition Engine Using a Combination of Compressed Natural Gas and Diesel Fuel [Volume 13, Issue 1, 2023, Pages 67-83]
-
Ghonimy, M.
Mathematical Analysis for Prediction Performance Rate of Wheel Type Trenching Machine [Volume 13, Issue 1, 2023, Pages 1-13]
-
Gohari, M.
Development and Field Evaluation of a Variable-Depth Tillage Tool Based on a Horizontal Pneumatic Sensor Measurement [Volume 13, Issue 1, 2023, Pages 85-99]
-
Golmohammadi, A.
Assessment of Sieve Slope, Sieve Range and Fan Suction on Cleaning Efficiency and Loss Rate of Peanut Thresher [Volume 13, Issue 3, 2023, Pages 349-363]
-
Golzarian, M. R.
Analysis of Workspace and Kinematics of Robot Manipulator for Product Handling in Agricultural Farm [Volume 13, Issue 2, 2023, Pages 101-115]
H
-
Hedayatipour, A.
Development and Field Evaluation of a Variable-Depth Tillage Tool Based on a Horizontal Pneumatic Sensor Measurement [Volume 13, Issue 1, 2023, Pages 85-99]
-
Hejazi, B.
Experimental Study and Mathematical Modeling of Hydrogen Sulfide Removal from Biogas [Volume 13, Issue 4, 2023, Pages 521-533]
-
Hesampour, R.
Evaluation and Optimization of Energy and Environmental Indicators Using Life Cycle Assessment and Data Envelopment Analysis
(Case Study: Industrial Cattle Farms in Northern Khuzestan) [Volume 13, Issue 4, 2023, Pages 383-404]
-
Hormozi, M. A.
A Multi-Objective Optimization to Determine The Optimal Patterns of Sustainable Agricultural Mechanization Using NSGA-II Algorithm [Volume 13, Issue 4, 2023, Pages 477-491]
J
-
Jafari, A.
Design and Construction of a High-voltage System to Kill Weeds with a Feedback Mechanism [Volume 13, Issue 2, 2023, Pages 117-133]
-
Jahanbakhshi, A.
Predicting Whole-body Vibration-based on Linear Regression Models and Determining Permissible Exposure Time of Tractor Operator [Volume 13, Issue 2, 2023, Pages 227-237]
-
Jalali, M.
Technical and Economic Feasibility of Using Solar Energy to Provide Heat Load to a Poultry House [Volume 13, Issue 3, 2023, Pages 285-307]
-
Javadikia, H.
Detection of Different Percentages of Palm in Corn Oil with the Help of an Electric Nose [Volume 13, Issue 2, 2023, Pages 163-174]
-
Javidan, S. M.
Detection of Cucumber Fruit on Plant Image Using Artificial Neural Network [Volume 13, Issue 1, 2023, Pages 27-39]
K
-
Kalantari, D.
Evaluation of the Effects of Artificial Light on Some Plant Characteristics in the Design and Construction of a Small-scale Plant Factory [Volume 13, Issue 2, 2023, Pages 213-226]
-
Karami, A.
Maize Tassel Detection and Counting Using Deep Learning Techniques [Volume 13, Issue 2, 2023, Pages 175-194]
-
Kheiralipour, K.
Predicting Whole-body Vibration-based on Linear Regression Models and Determining Permissible Exposure Time of Tractor Operator [Volume 13, Issue 2, 2023, Pages 227-237]
-
Khodabakhshian, R.
Investigation of the Cylinder Liner Wear in Agricultural Tractors [Volume 13, Issue 1, 2023, Pages 15-25]
-
Khojastehpour, M.
Identifying and Prioritizing the Key Factors Affecting the Efficient Maintenance Management in the Agricultural Industry Based on Empirical Studies [Volume 13, Issue 4, 2023, Pages 427-451]
M
-
Maharlooei, M.
Fusion of Multispectral and Radar Images to Enhance Classification Accuracy and Estimate the Area under Various Crops Cultivation [Volume 13, Issue 4, 2023, Pages 493-508]
-
Maleki, A.
Thermal Analysis and Exergy of Linear Fresnel Reflectors for Feasibility of Use in Greenhouse Heating System [Volume 13, Issue 2, 2023, Pages 147-162]
-
Masoudi, H.
Mass and Volume Determination of Orange Fruit using Ultrasonic Sensors [Volume 13, Issue 1, 2023, Pages 55-66]
-
Minaei, S.
Automatic Detection of Plant Cultivation Rows Robot using Machine Vision (Case Study: Basil Plant) [Volume 13, Issue 4, 2023, Pages 453-475]
-
Mir Esmaeili, S. M.
Design of a Harvester for Harvesting of the Leaves and Stems of Plants in Cultivation Rows and Evaluation its Performance in the Peppermint Farm [Volume 13, Issue 3, 2023, Pages 267-284]
-
Mohammadi, A.
Predicting Whole-body Vibration-based on Linear Regression Models and Determining Permissible Exposure Time of Tractor Operator [Volume 13, Issue 2, 2023, Pages 227-237]
-
Mohammad Zamani, D.
Detection of Cucumber Fruit on Plant Image Using Artificial Neural Network [Volume 13, Issue 1, 2023, Pages 27-39]
-
Mohammad Zamani, D.
Experimental Investigation of Performance and Emissions of a Compression Ignition Engine Using a Combination of Compressed Natural Gas and Diesel Fuel [Volume 13, Issue 1, 2023, Pages 67-83]
-
Monjezi, N.
Measurement of Losses in a Austoft Sugarcane Harvester Case 7000 [Volume 13, Issue 3, 2023, Pages 335-348]
-
Monjezi, N.
A Multi-Objective Optimization to Determine The Optimal Patterns of Sustainable Agricultural Mechanization Using NSGA-II Algorithm [Volume 13, Issue 4, 2023, Pages 477-491]
-
Montazeri, M.
Technical and Economic Feasibility of Using Solar Energy to Provide Heat Load to a Poultry House [Volume 13, Issue 3, 2023, Pages 285-307]
-
Moradi, M.
Cold Plasma: A Novel Pretreatment Method for Drying Canola Seeds: Kinetics Study and Superposition Modeling [Volume 13, Issue 1, 2023, Pages 41-53]
-
Morcos, M.
Mathematical Analysis for Prediction Performance Rate of Wheel Type Trenching Machine [Volume 13, Issue 1, 2023, Pages 1-13]
-
Motevali, A.
Environmental Impact Assessment of Electricity Generation in Wind Power Plants (Case Study: Kahak Qazvin and Aqkand Miyaneh) [Volume 13, Issue 4, 2023, Pages 405-426]
-
Mousavi Seyedi, S. R.
Evaluation of the Effects of Artificial Light on Some Plant Characteristics in the Design and Construction of a Small-scale Plant Factory [Volume 13, Issue 2, 2023, Pages 213-226]
-
Mousazadeh, H.
Design and Construction of a High-voltage System to Kill Weeds with a Feedback Mechanism [Volume 13, Issue 2, 2023, Pages 117-133]
-
Mousazadeh, H.
Thermal and Mechanical Analysis of Rotary Kiln of Activated Carbon Producing Reactor [Volume 13, Issue 2, 2023, Pages 135-146]
N
-
Nadafzadeh, M.
Automatic Detection of Plant Cultivation Rows Robot using Machine Vision (Case Study: Basil Plant) [Volume 13, Issue 4, 2023, Pages 453-475]
-
Naderi Parizi, S.
Thermal and Mechanical Analysis of Rotary Kiln of Activated Carbon Producing Reactor [Volume 13, Issue 2, 2023, Pages 135-146]
-
Naderloo, L.
Detection of Different Percentages of Palm in Corn Oil with the Help of an Electric Nose [Volume 13, Issue 2, 2023, Pages 163-174]
-
Najafi, Gh.
Design of a Harvester for Harvesting of the Leaves and Stems of Plants in Cultivation Rows and Evaluation its Performance in the Peppermint Farm [Volume 13, Issue 3, 2023, Pages 267-284]
-
Nasrollahi Azar, J.
Feasibility of Soil Texture Determination Using Acoustic Signal Processing of a Cone Penetrometer [Volume 13, Issue 4, 2023, Pages 509-520]
-
Navid, H.
Design and Construction of a High-voltage System to Kill Weeds with a Feedback Mechanism [Volume 13, Issue 2, 2023, Pages 117-133]
-
Niakousari, M.
Cold Plasma: A Novel Pretreatment Method for Drying Canola Seeds: Kinetics Study and Superposition Modeling [Volume 13, Issue 1, 2023, Pages 41-53]
-
Niknam, Y.
Experimental Investigation of Performance and Emissions of a Compression Ignition Engine Using a Combination of Compressed Natural Gas and Diesel Fuel [Volume 13, Issue 1, 2023, Pages 67-83]
-
Noroozi, S.
Thermal Analysis and Exergy of Linear Fresnel Reflectors for Feasibility of Use in Greenhouse Heating System [Volume 13, Issue 2, 2023, Pages 147-162]
-
Nowroozipour, M.
Environmental Impact Assessment of Electricity Generation in Wind Power Plants (Case Study: Kahak Qazvin and Aqkand Miyaneh) [Volume 13, Issue 4, 2023, Pages 405-426]
-
Nowrouzieh, Sh.
Evaluation of Two Types of Cotton Pickers in Terms of the Functionality and Quality of the Harvested Fibers [Volume 13, Issue 3, 2023, Pages 321-333]
O
-
Osloob, F.
Cold Plasma: A Novel Pretreatment Method for Drying Canola Seeds: Kinetics Study and Superposition Modeling [Volume 13, Issue 1, 2023, Pages 41-53]
P
-
Pirvandi, K.
Design of a Harvester for Harvesting of the Leaves and Stems of Plants in Cultivation Rows and Evaluation its Performance in the Peppermint Farm [Volume 13, Issue 3, 2023, Pages 267-284]
R
-
Rahmani, S.
Technical Evaluation of Three Methods of Manual, Semi-mechanized, and Mechanized Peanut Harvesting in Moghan [Volume 13, Issue 2, 2023, Pages 239-247]
-
Rasouli, M.
Detection of Cucumber Fruit on Plant Image Using Artificial Neural Network [Volume 13, Issue 1, 2023, Pages 27-39]
-
Rezaei, H.
Drying Kinetics of White Seedless Grape Affected by High-Humidity Hot Air Impingement Blanching [Volume 13, Issue 3, 2023, Pages 365-382]
-
Rezvanivand fanaei, A.
Assessment of Sieve Slope, Sieve Range and Fan Suction on Cleaning Efficiency and Loss Rate of Peanut Thresher [Volume 13, Issue 3, 2023, Pages 349-363]
-
Rohani, A.
Experimental Study and Mathematical Modeling of Hydrogen Sulfide Removal from Biogas [Volume 13, Issue 4, 2023, Pages 521-533]
-
Rostami, M. A.
Comparison of Dry Land Wheat Grain Harvest Losses in Different Types of Chaff Collector Combine Harvesters in Kurdistan Province [Volume 13, Issue 3, 2023, Pages 309-319]
-
Rostami, M. A.
Fusion of Multispectral and Radar Images to Enhance Classification Accuracy and Estimate the Area under Various Crops Cultivation [Volume 13, Issue 4, 2023, Pages 493-508]
-
Rostampour, V.
Feasibility of Soil Texture Determination Using Acoustic Signal Processing of a Cone Penetrometer [Volume 13, Issue 4, 2023, Pages 509-520]
S
-
Saadikhani, M.
Fusion of Multispectral and Radar Images to Enhance Classification Accuracy and Estimate the Area under Various Crops Cultivation [Volume 13, Issue 4, 2023, Pages 493-508]
-
Sadeghi, M.
Drying Kinetics of White Seedless Grape Affected by High-Humidity Hot Air Impingement Blanching [Volume 13, Issue 3, 2023, Pages 365-382]
-
Safari, M.
Comparison of Dry Land Wheat Grain Harvest Losses in Different Types of Chaff Collector Combine Harvesters in Kurdistan Province [Volume 13, Issue 3, 2023, Pages 309-319]
-
Salatin, M.
Design of a Harvester for Harvesting of the Leaves and Stems of Plants in Cultivation Rows and Evaluation its Performance in the Peppermint Farm [Volume 13, Issue 3, 2023, Pages 267-284]
-
Shahgholi, Gh.
Assessment of Sieve Slope, Sieve Range and Fan Suction on Cleaning Efficiency and Loss Rate of Peanut Thresher [Volume 13, Issue 3, 2023, Pages 349-363]
-
Shahidi, R.
Predicting Whole-body Vibration-based on Linear Regression Models and Determining Permissible Exposure Time of Tractor Operator [Volume 13, Issue 2, 2023, Pages 227-237]
-
Shamsi Roodbarsar, P.
Evaluation of the Effects of Artificial Light on Some Plant Characteristics in the Design and Construction of a Small-scale Plant Factory [Volume 13, Issue 2, 2023, Pages 213-226]
-
Shariati, S. I.
Analysis of Workspace and Kinematics of Robot Manipulator for Product Handling in Agricultural Farm [Volume 13, Issue 2, 2023, Pages 101-115]
-
Sharifi, A.
Development and Field Evaluation of a Variable-Depth Tillage Tool Based on a Horizontal Pneumatic Sensor Measurement [Volume 13, Issue 1, 2023, Pages 85-99]
-
Soleimani, M.
Thermal and Mechanical Analysis of Rotary Kiln of Activated Carbon Producing Reactor [Volume 13, Issue 2, 2023, Pages 135-146]
-
Soleymani, M.
Measurement of Losses in a Austoft Sugarcane Harvester Case 7000 [Volume 13, Issue 3, 2023, Pages 335-348]
-
Soltanali, H.
Identifying and Prioritizing the Key Factors Affecting the Efficient Maintenance Management in the Agricultural Industry Based on Empirical Studies [Volume 13, Issue 4, 2023, Pages 427-451]
-
Soon, R.
Design of a Harvester for Harvesting of the Leaves and Stems of Plants in Cultivation Rows and Evaluation its Performance in the Peppermint Farm [Volume 13, Issue 3, 2023, Pages 267-284]
T
-
Tabatabaei koloor, R.
Environmental Impact Assessment of Electricity Generation in Wind Power Plants (Case Study: Kahak Qazvin and Aqkand Miyaneh) [Volume 13, Issue 4, 2023, Pages 405-426]
-
Taghinazhad, J.
Technical Evaluation of Three Methods of Manual, Semi-mechanized, and Mechanized Peanut Harvesting in Moghan [Volume 13, Issue 2, 2023, Pages 239-247]
-
Tahmasebi, M.
Development and Field Evaluation of a Variable-Depth Tillage Tool Based on a Horizontal Pneumatic Sensor Measurement [Volume 13, Issue 1, 2023, Pages 85-99]
Z
-
Zaki Dizaji, H.
A Multi-Objective Optimization to Determine The Optimal Patterns of Sustainable Agricultural Mechanization Using NSGA-II Algorithm [Volume 13, Issue 4, 2023, Pages 477-491]
-
Zand, M.
Detection of Cucumber Fruit on Plant Image Using Artificial Neural Network [Volume 13, Issue 1, 2023, Pages 27-39]
-
Zangene Wandi, Z.
Detection of Different Percentages of Palm in Corn Oil with the Help of an Electric Nose [Volume 13, Issue 2, 2023, Pages 163-174]
-
Zare-Bavani, M. R.
Automatic Detection of Plant Cultivation Rows Robot using Machine Vision (Case Study: Basil Plant) [Volume 13, Issue 4, 2023, Pages 453-475]
-
Zarei, M.
Experimental Study and Mathematical Modeling of Hydrogen Sulfide Removal from Biogas [Volume 13, Issue 4, 2023, Pages 521-533]