Abdanan Mehdizadeh, S. Modeling and Fabrication of a Robot for Sowing in a Seedling Tray (Case Study: Sugar Beet) [Volume 13, Issue 3, 2023, Pages 249-266]
Abdanan Mehdizadeh, S. Automatic Detection of Plant Cultivation Rows Robot using Machine Vision (Case Study: Basil Plant) [Volume 13, Issue 4, 2023, Pages 453-475]
Abdi, J. Assessment of Sieve Slope, Sieve Range and Fan Suction on Cleaning Efficiency and Loss Rate of Peanut Thresher [Volume 13, Issue 3, 2023, Pages 349-363]
Aghilinategh, N. Detection of Different Percentages of Palm in Corn Oil with the Help of an Electric Nose [Volume 13, Issue 2, 2023, Pages 163-174]
Aghkhani, M. H. Analysis of Workspace and Kinematics of Robot Manipulator for Product Handling in Agricultural Farm [Volume 13, Issue 2, 2023, Pages 101-115]
Akbari, A. A. Analysis of Workspace and Kinematics of Robot Manipulator for Product Handling in Agricultural Farm [Volume 13, Issue 2, 2023, Pages 101-115]
Alimardani, R. Thermal and Mechanical Analysis of Rotary Kiln of Activated Carbon Producing Reactor [Volume 13, Issue 2, 2023, Pages 135-146]
B
Badr, A. Mathematical Analysis for Prediction Performance Rate of Wheel Type Trenching Machine [Volume 13, Issue 1, 2023, Pages 1-13]
Baghbani, R. Investigation of the Cylinder Liner Wear in Agricultural Tractors [Volume 13, Issue 1, 2023, Pages 15-25]
Bahrami, H. A Multi-Objective Optimization to Determine The Optimal Patterns of Sustainable Agricultural Mechanization Using NSGA-II Algorithm [Volume 13, Issue 4, 2023, Pages 477-491]
Banakar, A. Technical and Economic Feasibility of Using Solar Energy to Provide Heat Load to a Poultry House [Volume 13, Issue 3, 2023, Pages 285-307]
Banakar, A. Automatic Detection of Plant Cultivation Rows Robot using Machine Vision (Case Study: Basil Plant) [Volume 13, Issue 4, 2023, Pages 453-475]
Bayati, M. R. Experimental Study and Mathematical Modeling of Hydrogen Sulfide Removal from Biogas [Volume 13, Issue 4, 2023, Pages 521-533]
Besharati, B. Design and Construction of a High-voltage System to Kill Weeds with a Feedback Mechanism [Volume 13, Issue 2, 2023, Pages 117-133]
Besharati, Sh. Thermal Analysis and Exergy of Linear Fresnel Reflectors for Feasibility of Use in Greenhouse Heating System [Volume 13, Issue 2, 2023, Pages 147-162]
E
Ebrahimi-Nik, M. A. Experimental Study and Mathematical Modeling of Hydrogen Sulfide Removal from Biogas [Volume 13, Issue 4, 2023, Pages 521-533]
Ebrahim Khanloo Sisi, V. Measurement of Losses in a Austoft Sugarcane Harvester Case 7000 [Volume 13, Issue 3, 2023, Pages 335-348]
Edalat, M. Fusion of Multispectral and Radar Images to Enhance Classification Accuracy and Estimate the Area under Various Crops Cultivation [Volume 13, Issue 4, 2023, Pages 493-508]
F
Falahat Nejad Mahani, Sh. Maize Tassel Detection and Counting Using Deep Learning Techniques [Volume 13, Issue 2, 2023, Pages 175-194]
Fallah, M. Detection of Chilo Suppressalis using Smartphone Images and Deep Learning [Volume 13, Issue 2, 2023, Pages 195-211]
Farrokhi Teimourlou, R. Feasibility of Soil Texture Determination Using Acoustic Signal Processing of a Cone Penetrometer [Volume 13, Issue 4, 2023, Pages 509-520]
Farzaneh, B. Technical and Economic Feasibility of Using Solar Energy to Provide Heat Load to a Poultry House [Volume 13, Issue 3, 2023, Pages 285-307]
Fathi, R. Evaluation and Optimization of Energy and Environmental Indicators Using Life Cycle Assessment and Data Envelopment Analysis
(Case Study: Industrial Cattle Farms in Northern Khuzestan) [Volume 13, Issue 4, 2023, Pages 383-404]
G
Ghamari, B. Predicting Whole-body Vibration-based on Linear Regression Models and Determining Permissible Exposure Time of Tractor Operator [Volume 13, Issue 2, 2023, Pages 227-237]
Ghanbari Parmehr, E. Detection of Chilo Suppressalis using Smartphone Images and Deep Learning [Volume 13, Issue 2, 2023, Pages 195-211]
Ghasemi, K. Evaluation of the Effects of Artificial Light on Some Plant Characteristics in the Design and Construction of a Small-scale Plant Factory [Volume 13, Issue 2, 2023, Pages 213-226]
Ghasemi-Nejad Raeini, M. Evaluation and Optimization of Energy and Environmental Indicators Using Life Cycle Assessment and Data Envelopment Analysis
(Case Study: Industrial Cattle Farms in Northern Khuzestan) [Volume 13, Issue 4, 2023, Pages 383-404]
Ghiasi, P. Design of a Harvester for Harvesting of the Leaves and Stems of Plants in Cultivation Rows and Evaluation its Performance in the Peppermint Farm [Volume 13, Issue 3, 2023, Pages 267-284]
Gholami Par-Shokohi, M. Experimental Investigation of Performance and Emissions of a Compression Ignition Engine Using a Combination of Compressed Natural Gas and Diesel Fuel [Volume 13, Issue 1, 2023, Pages 67-83]
Ghonimy, M. Mathematical Analysis for Prediction Performance Rate of Wheel Type Trenching Machine [Volume 13, Issue 1, 2023, Pages 1-13]
Gohari, M. Development and Field Evaluation of a Variable-Depth Tillage Tool Based on a Horizontal Pneumatic Sensor Measurement [Volume 13, Issue 1, 2023, Pages 85-99]
Golmohammadi, A. Assessment of Sieve Slope, Sieve Range and Fan Suction on Cleaning Efficiency and Loss Rate of Peanut Thresher [Volume 13, Issue 3, 2023, Pages 349-363]
Golzarian, M. R. Analysis of Workspace and Kinematics of Robot Manipulator for Product Handling in Agricultural Farm [Volume 13, Issue 2, 2023, Pages 101-115]
H
Hedayatipour, A. Development and Field Evaluation of a Variable-Depth Tillage Tool Based on a Horizontal Pneumatic Sensor Measurement [Volume 13, Issue 1, 2023, Pages 85-99]
Hejazi, B. Experimental Study and Mathematical Modeling of Hydrogen Sulfide Removal from Biogas [Volume 13, Issue 4, 2023, Pages 521-533]
Hesampour, R. Evaluation and Optimization of Energy and Environmental Indicators Using Life Cycle Assessment and Data Envelopment Analysis
(Case Study: Industrial Cattle Farms in Northern Khuzestan) [Volume 13, Issue 4, 2023, Pages 383-404]
Hormozi, M. A. A Multi-Objective Optimization to Determine The Optimal Patterns of Sustainable Agricultural Mechanization Using NSGA-II Algorithm [Volume 13, Issue 4, 2023, Pages 477-491]
J
Jafari, A. Design and Construction of a High-voltage System to Kill Weeds with a Feedback Mechanism [Volume 13, Issue 2, 2023, Pages 117-133]
Jahanbakhshi, A. Predicting Whole-body Vibration-based on Linear Regression Models and Determining Permissible Exposure Time of Tractor Operator [Volume 13, Issue 2, 2023, Pages 227-237]
Jalali, M. Technical and Economic Feasibility of Using Solar Energy to Provide Heat Load to a Poultry House [Volume 13, Issue 3, 2023, Pages 285-307]
Javadikia, H. Detection of Different Percentages of Palm in Corn Oil with the Help of an Electric Nose [Volume 13, Issue 2, 2023, Pages 163-174]
Javidan, S. M. Detection of Cucumber Fruit on Plant Image Using Artificial Neural Network [Volume 13, Issue 1, 2023, Pages 27-39]
K
Kalantari, D. Evaluation of the Effects of Artificial Light on Some Plant Characteristics in the Design and Construction of a Small-scale Plant Factory [Volume 13, Issue 2, 2023, Pages 213-226]
Karami, A. Maize Tassel Detection and Counting Using Deep Learning Techniques [Volume 13, Issue 2, 2023, Pages 175-194]
Kheiralipour, K. Predicting Whole-body Vibration-based on Linear Regression Models and Determining Permissible Exposure Time of Tractor Operator [Volume 13, Issue 2, 2023, Pages 227-237]
Khodabakhshian, R. Investigation of the Cylinder Liner Wear in Agricultural Tractors [Volume 13, Issue 1, 2023, Pages 15-25]
Khojastehpour, M. Identifying and Prioritizing the Key Factors Affecting the Efficient Maintenance Management in the Agricultural Industry Based on Empirical Studies [Volume 13, Issue 4, 2023, Pages 427-451]
M
Maharlooei, M. Fusion of Multispectral and Radar Images to Enhance Classification Accuracy and Estimate the Area under Various Crops Cultivation [Volume 13, Issue 4, 2023, Pages 493-508]
Maleki, A. Thermal Analysis and Exergy of Linear Fresnel Reflectors for Feasibility of Use in Greenhouse Heating System [Volume 13, Issue 2, 2023, Pages 147-162]
Masoudi, H. Mass and Volume Determination of Orange Fruit using Ultrasonic Sensors [Volume 13, Issue 1, 2023, Pages 55-66]
Minaei, S. Automatic Detection of Plant Cultivation Rows Robot using Machine Vision (Case Study: Basil Plant) [Volume 13, Issue 4, 2023, Pages 453-475]
Mir Esmaeili, S. M. Design of a Harvester for Harvesting of the Leaves and Stems of Plants in Cultivation Rows and Evaluation its Performance in the Peppermint Farm [Volume 13, Issue 3, 2023, Pages 267-284]
Mohammadi, A. Predicting Whole-body Vibration-based on Linear Regression Models and Determining Permissible Exposure Time of Tractor Operator [Volume 13, Issue 2, 2023, Pages 227-237]
Mohammad Zamani, D. Detection of Cucumber Fruit on Plant Image Using Artificial Neural Network [Volume 13, Issue 1, 2023, Pages 27-39]
Mohammad Zamani, D. Experimental Investigation of Performance and Emissions of a Compression Ignition Engine Using a Combination of Compressed Natural Gas and Diesel Fuel [Volume 13, Issue 1, 2023, Pages 67-83]
Monjezi, N. Measurement of Losses in a Austoft Sugarcane Harvester Case 7000 [Volume 13, Issue 3, 2023, Pages 335-348]
Monjezi, N. A Multi-Objective Optimization to Determine The Optimal Patterns of Sustainable Agricultural Mechanization Using NSGA-II Algorithm [Volume 13, Issue 4, 2023, Pages 477-491]
Montazeri, M. Technical and Economic Feasibility of Using Solar Energy to Provide Heat Load to a Poultry House [Volume 13, Issue 3, 2023, Pages 285-307]
Moradi, M. Cold Plasma: A Novel Pretreatment Method for Drying Canola Seeds: Kinetics Study and Superposition Modeling [Volume 13, Issue 1, 2023, Pages 41-53]
Morcos, M. Mathematical Analysis for Prediction Performance Rate of Wheel Type Trenching Machine [Volume 13, Issue 1, 2023, Pages 1-13]
Motevali, A. Environmental Impact Assessment of Electricity Generation in Wind Power Plants (Case Study: Kahak Qazvin and Aqkand Miyaneh) [Volume 13, Issue 4, 2023, Pages 405-426]
Mousavi Seyedi, S. R. Evaluation of the Effects of Artificial Light on Some Plant Characteristics in the Design and Construction of a Small-scale Plant Factory [Volume 13, Issue 2, 2023, Pages 213-226]
Mousazadeh, H. Design and Construction of a High-voltage System to Kill Weeds with a Feedback Mechanism [Volume 13, Issue 2, 2023, Pages 117-133]
Mousazadeh, H. Thermal and Mechanical Analysis of Rotary Kiln of Activated Carbon Producing Reactor [Volume 13, Issue 2, 2023, Pages 135-146]
N
Nadafzadeh, M. Automatic Detection of Plant Cultivation Rows Robot using Machine Vision (Case Study: Basil Plant) [Volume 13, Issue 4, 2023, Pages 453-475]
Naderi Parizi, S. Thermal and Mechanical Analysis of Rotary Kiln of Activated Carbon Producing Reactor [Volume 13, Issue 2, 2023, Pages 135-146]
Naderloo, L. Detection of Different Percentages of Palm in Corn Oil with the Help of an Electric Nose [Volume 13, Issue 2, 2023, Pages 163-174]
Najafi, Gh. Design of a Harvester for Harvesting of the Leaves and Stems of Plants in Cultivation Rows and Evaluation its Performance in the Peppermint Farm [Volume 13, Issue 3, 2023, Pages 267-284]
Nasrollahi Azar, J. Feasibility of Soil Texture Determination Using Acoustic Signal Processing of a Cone Penetrometer [Volume 13, Issue 4, 2023, Pages 509-520]
Navid, H. Design and Construction of a High-voltage System to Kill Weeds with a Feedback Mechanism [Volume 13, Issue 2, 2023, Pages 117-133]
Niakousari, M. Cold Plasma: A Novel Pretreatment Method for Drying Canola Seeds: Kinetics Study and Superposition Modeling [Volume 13, Issue 1, 2023, Pages 41-53]
Niknam, Y. Experimental Investigation of Performance and Emissions of a Compression Ignition Engine Using a Combination of Compressed Natural Gas and Diesel Fuel [Volume 13, Issue 1, 2023, Pages 67-83]
Noroozi, S. Thermal Analysis and Exergy of Linear Fresnel Reflectors for Feasibility of Use in Greenhouse Heating System [Volume 13, Issue 2, 2023, Pages 147-162]
Nowroozipour, M. Environmental Impact Assessment of Electricity Generation in Wind Power Plants (Case Study: Kahak Qazvin and Aqkand Miyaneh) [Volume 13, Issue 4, 2023, Pages 405-426]
Nowrouzieh, Sh. Evaluation of Two Types of Cotton Pickers in Terms of the Functionality and Quality of the Harvested Fibers [Volume 13, Issue 3, 2023, Pages 321-333]
O
Osloob, F. Cold Plasma: A Novel Pretreatment Method for Drying Canola Seeds: Kinetics Study and Superposition Modeling [Volume 13, Issue 1, 2023, Pages 41-53]
P
Pirvandi, K. Design of a Harvester for Harvesting of the Leaves and Stems of Plants in Cultivation Rows and Evaluation its Performance in the Peppermint Farm [Volume 13, Issue 3, 2023, Pages 267-284]
R
Rahmani, S. Technical Evaluation of Three Methods of Manual, Semi-mechanized, and Mechanized Peanut Harvesting in Moghan [Volume 13, Issue 2, 2023, Pages 239-247]
Rasouli, M. Detection of Cucumber Fruit on Plant Image Using Artificial Neural Network [Volume 13, Issue 1, 2023, Pages 27-39]
Rezaei, H. Drying Kinetics of White Seedless Grape Affected by High-Humidity Hot Air Impingement Blanching [Volume 13, Issue 3, 2023, Pages 365-382]
Rezvanivand fanaei, A. Assessment of Sieve Slope, Sieve Range and Fan Suction on Cleaning Efficiency and Loss Rate of Peanut Thresher [Volume 13, Issue 3, 2023, Pages 349-363]
Rohani, A. Experimental Study and Mathematical Modeling of Hydrogen Sulfide Removal from Biogas [Volume 13, Issue 4, 2023, Pages 521-533]
Rostami, M. A. Comparison of Dry Land Wheat Grain Harvest Losses in Different Types of Chaff Collector Combine Harvesters in Kurdistan Province [Volume 13, Issue 3, 2023, Pages 309-319]
Rostami, M. A. Fusion of Multispectral and Radar Images to Enhance Classification Accuracy and Estimate the Area under Various Crops Cultivation [Volume 13, Issue 4, 2023, Pages 493-508]
Rostampour, V. Feasibility of Soil Texture Determination Using Acoustic Signal Processing of a Cone Penetrometer [Volume 13, Issue 4, 2023, Pages 509-520]
S
Saadikhani, M. Fusion of Multispectral and Radar Images to Enhance Classification Accuracy and Estimate the Area under Various Crops Cultivation [Volume 13, Issue 4, 2023, Pages 493-508]
Sadeghi, M. Drying Kinetics of White Seedless Grape Affected by High-Humidity Hot Air Impingement Blanching [Volume 13, Issue 3, 2023, Pages 365-382]
Safari, M. Comparison of Dry Land Wheat Grain Harvest Losses in Different Types of Chaff Collector Combine Harvesters in Kurdistan Province [Volume 13, Issue 3, 2023, Pages 309-319]
Salatin, M. Design of a Harvester for Harvesting of the Leaves and Stems of Plants in Cultivation Rows and Evaluation its Performance in the Peppermint Farm [Volume 13, Issue 3, 2023, Pages 267-284]
Shahgholi, Gh. Assessment of Sieve Slope, Sieve Range and Fan Suction on Cleaning Efficiency and Loss Rate of Peanut Thresher [Volume 13, Issue 3, 2023, Pages 349-363]
Shahidi, R. Predicting Whole-body Vibration-based on Linear Regression Models and Determining Permissible Exposure Time of Tractor Operator [Volume 13, Issue 2, 2023, Pages 227-237]
Shamsi Roodbarsar, P. Evaluation of the Effects of Artificial Light on Some Plant Characteristics in the Design and Construction of a Small-scale Plant Factory [Volume 13, Issue 2, 2023, Pages 213-226]
Shariati, S. I. Analysis of Workspace and Kinematics of Robot Manipulator for Product Handling in Agricultural Farm [Volume 13, Issue 2, 2023, Pages 101-115]
Sharifi, A. Development and Field Evaluation of a Variable-Depth Tillage Tool Based on a Horizontal Pneumatic Sensor Measurement [Volume 13, Issue 1, 2023, Pages 85-99]
Soleimani, M. Thermal and Mechanical Analysis of Rotary Kiln of Activated Carbon Producing Reactor [Volume 13, Issue 2, 2023, Pages 135-146]
Soleymani, M. Measurement of Losses in a Austoft Sugarcane Harvester Case 7000 [Volume 13, Issue 3, 2023, Pages 335-348]
Soltanali, H. Identifying and Prioritizing the Key Factors Affecting the Efficient Maintenance Management in the Agricultural Industry Based on Empirical Studies [Volume 13, Issue 4, 2023, Pages 427-451]
Soon, R. Design of a Harvester for Harvesting of the Leaves and Stems of Plants in Cultivation Rows and Evaluation its Performance in the Peppermint Farm [Volume 13, Issue 3, 2023, Pages 267-284]
T
Tabatabaei koloor, R. Environmental Impact Assessment of Electricity Generation in Wind Power Plants (Case Study: Kahak Qazvin and Aqkand Miyaneh) [Volume 13, Issue 4, 2023, Pages 405-426]
Taghinazhad, J. Technical Evaluation of Three Methods of Manual, Semi-mechanized, and Mechanized Peanut Harvesting in Moghan [Volume 13, Issue 2, 2023, Pages 239-247]
Tahmasebi, M. Development and Field Evaluation of a Variable-Depth Tillage Tool Based on a Horizontal Pneumatic Sensor Measurement [Volume 13, Issue 1, 2023, Pages 85-99]
Z
Zaki Dizaji, H. A Multi-Objective Optimization to Determine The Optimal Patterns of Sustainable Agricultural Mechanization Using NSGA-II Algorithm [Volume 13, Issue 4, 2023, Pages 477-491]
Zand, M. Detection of Cucumber Fruit on Plant Image Using Artificial Neural Network [Volume 13, Issue 1, 2023, Pages 27-39]
Zangene Wandi, Z. Detection of Different Percentages of Palm in Corn Oil with the Help of an Electric Nose [Volume 13, Issue 2, 2023, Pages 163-174]
Zare-Bavani, M. R. Automatic Detection of Plant Cultivation Rows Robot using Machine Vision (Case Study: Basil Plant) [Volume 13, Issue 4, 2023, Pages 453-475]
Zarei, M. Experimental Study and Mathematical Modeling of Hydrogen Sulfide Removal from Biogas [Volume 13, Issue 4, 2023, Pages 521-533]
